Abstract
Conventional parameters based on CFD methodology for the investigation on hump characteristics of a pump turbine cannot reflect the dynamic interaction mechanism between the runner and the fluid. This research presents a dynamic interaction mechanism of a pump turbine operating in the hump region. First, vorticity dynamic parameters were obtained based on the theory of vorticity dynamics. Second, 3-D unsteady flow simulations were performed in a full pump turbine model using the SST k-ω turbulence model, and numerical results have a good agreement with the experiments. Then, analysis was carried out to determine the relation between the vorticity dynamic parameters and hump characteristics. The results indicate that the theory of vorticity dynamics has an advantage in evaluating the dynamic performance of a pump turbine. The energy transfer between the runner and the fluid is through vorticity dynamic parameters-pressure and friction terms, in which the pressure term accounts for the most. Furthermore, vortex generation mainly results from the skin friction. Combining vorticity dynamic analysis with the method of Q-criterion indicates that hump characteristics are related to the reduction of the surface normal pressure work and vortex motion on the suction surfaces close to the leading edges in the runner, and the increase of skin friction work in the stay-guide vanes.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Ch. Gentner, Z. Smiljcic and M. Sallaberger, Analysis of unstable pump characteristics of pump turbines, 16th Intern. Seminar on Hydropower Plants-Reliable Hydropower for a Safe and Sustainable Power Production, Vienna (2010).
O. Braun, J. L. Kueny and F. Avella, Numerical analysis of flow phenomena related to the unstable energy-discharge characteristic of a pump-turbine in pump mode, Proceedings of 2005 ASME Fluids Engineering Division Summer Meeting and Exhibition, Houston, USA (2005).
J. T. Liu, S. H. Liu and Y. L. Wu, Numerical investigation of the hump characteristic of a pump-turbine based on an improved cavitation model, Computer and Fluids, 68 (2012) 105–111.
J. Yang, G. Pravesi and S. Yuan, Experimental characterization of a pump-Turbine in pump mode at hump instability region, J. of Fluids Engineering, 137 (051109) (2015) 1–11.
H. J. Ran, X. W. Luo and L. Zhu, Experimental study of the pressure fluctuations in a pump turbine at large partial flow conditions, Chinese J. of Mechanical Engineering, 25 (6) (2012) 1205–1209.
J. Yan, J. Koutnik and U. Seidel, Compressible simulation of rotor-stator interaction in pump-turbines, Proceedings of 25th IAHR Symposium on Hydraulic Machinery and Systems, Timisoara, Romania (2010).
R. Z. Gong, H. J. Wang, L. X. Chen and D. Y. Li, Application of entropy production theory to hydro-turbine hydraulic analysis, Sci. China Tech. Sci., 56 (7) (2013) 1636–16437.
D. Y. Li, R. Z. Gong and H. J. Wang, Dynamic analysis on pressure fluctuation in vaneless region of a pump turbine, Sci. China Tech. Sci., 58 (5) (2015) 813–824.
D. Y. Li, R. Z. Gong and H. J. Wang, Unsteady simulation and analysis for hump characteristics of a pump turbine model, Renew Energ., 77 (2015) 32–42.
X. J. Wu, Unsteady flow simulation and vortex flow diagnosis of a Francis turbine, Ph.D. Thesis, Beijing, Tsinghua University (2009).
J. Z. Wu, R.W. Tramel and F. L. Zhu, A A vorticity dynamics theory of three-dimensional flow separation, Phys. Fluids, 12 (8) (2000) 1932–1954.
Y. T. Yang, H. Wu and Q. S. Li, Vorticity dynamics in axial compressor flow diagnosis and design, ASME J. Fluids Eng., 130 (041102) (2008).
R. K. Zhang, V. Dam and J. Z. Wu, Aerodynamic characteristics of wind turbine blades with a sinusoidal leading edge, Wind Energy, 15 (3) (2012) 407–424.
A. Surana, G. B. Jacons and O. Grunberg, An exact theory of three-dimensional fixed separation in unsteady flows, Phys. Fluids, 20 (10) (2008) 107101.
F. C. Li, H. G. Fan and Z. W. Wang, Coupled design and optimization for runner blades of a tubular turbine based on the boundary vorticity dynamics theory, ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, 1 (2010) 603–609.
L. Zhang, S. H. Liu and Y. L. Wu, Vorticity dynamics analysis on flow in Francis hydraulic turbine, ASME 2006 2nd Joint U.S.-European Fluids Engineering Summer Meeting Collocated with the 14th International Conference on Nuclear Engineering, Miami, Florida, USA (2006) 21–725.
J. Z. Wu, An introduction to vorticity dynamics, Higher Education Press (1993) (in Chinese).
J. C. Wu, Elements of vorticity aerodynamics, Springer (2005).
Q. S. Li, H. Wu and M. Guo, Vorticity dynamics in axial compressor flow diagnosis and design—Part II: Methodology and application of boundary vorticity flux, ASME J. Fluids Eng., 132 (1) (2009) 011102.
D. Y. Li, R. Z. Gong and H. J. Wang, Numerical investigation in the vaned distributor under different guide vanes openings of a pump turbine in pump mode, J. of Applied Fluid Mechanics, 9 (1) (2016) 253–266.
IEC60193, Hydraulic turbines, storage pumps and pump turbines-model acceptance tests (1999) 107–108.
Author information
Authors and Affiliations
Corresponding author
Additional information
Recommended by Associate Editor Jun Sang Park
Deyou Li is currently a Ph.D. candidate at School of Energy Science and Engineering, Harbin Institute of Technology, China. He received his B.S. and M.S. from Harbin Institute of Technology, in 2010 and 2012, respectively. His research interests include numerical simulation and experimental investigation of a pump turbine, turbine and pump.
Rights and permissions
About this article
Cite this article
Li, D., Gong, R., Wang, H. et al. Analysis of vorticity dynamics for hump characteristics of a pump turbine model. J Mech Sci Technol 30, 3641–3650 (2016). https://doi.org/10.1007/s12206-016-0725-1
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12206-016-0725-1