Abstract
Structural damage detection technique involves the problem of how to locate and detect damage that occurs in a structure by using the observed changes of its dynamic and static characteristics. The objective of this study is to present an analytical method for damage detection by utilizing displacement curvature and all static deflection data to be expanded from the measured deflection data. Utilizing the measured displacements as displacement constraints to describe a damaged beam, minimizing the change of the displacement vector between undamaged and damaged states, and neglecting the variation between the test data and the analytical results, the deflection shape and displacement curvature of the damaged beam can be estimated, and the damage can be detected by the curvature. The validity and effectiveness of the proposed method are illustrated through comparison with the experimental results of a simple cantilever beam test.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Z. Sheena, A. Unger and A. Zalmanovich, Theoretical stiffness matrix correction by static test results, Israel Journal of Technology, 20 (1982) 245–253.
M. Sanayei and S.F. Scampoli, Structural element stiffness identification from static test data, Journal of Engineering Mechanics, 117 (1991) 1021–1036.
M. Sanayei and O. Onipede, Damage assessment of structures using static test data, AIAA Journal, 29 (1991) 1174–1179.
M. R. Banan, M. R. Banan and K. D. Hjelmstad, Parameter estimation of structures from static response. I: Computational aspects, Journal of Structural Engineering, 120 (1993) 3243–3258.
M. R. Banan, M. R. Banan and K. D. Hjelmstad, Parameter estimation of structures from static response. II: Numerical simulation studies, Journal of Structural Engineering, 120 (1993) 3259–3283.
I. Y. Choi, J. S. Lee, E. Choi and H. N. Cho, Development of elastic damage load theorem for damage detection in a statically determinate beam, Computers & Structures, 82 (2004) 2483–2492.
X. Z. Chen, H. P. Zhu and C. Y. Chen, Structural damage identification using test static data based on grey system theory, Journal of Zhejiang University SCIENCE 6A (*) (2005) 790–796.
F. Bakhtiari-Nejad, A. Rahai and A. Esfandiari, A structural damage detection method using static noisy data, Engineering Structures, 27 (2005) 1784–1793.
X. Wang, N. Hu, H. Fukunaga and Z. H. Yao, Structural damage identification using static test data and changes in frequencies, Engineering Structures, 23 (2001) 610–621.
A. K. Pandey, M. Biswas and M. M. Samman, Damage detection from changes in curvature mode shapes, Journal of Sound and Vibration, 145 (1991) 321–332.
T. Lauwagie, H. Sol and E. Dascotte, Damage identification in beams using inverse methods, Proc. of the International Seminar in Modal Analysis, Leuven, Belgium (2002).
E. Sazonov and P. Klinkhachorn, Optimal spatial sampling interval for damage detection by curvature or strain energy mode shapes, Journal of Sound and Vibration, 285 (2005) 783–801.
H. C. Eun, E. T. Lee and H. S. Chung, On the static analysis of constrained structural systems, Canadian Journal of Civil Engineering, 31 (2004) 1119–1122.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Lee, ET., Eun, HC. Damage detection of damaged beam by constrained displacement curvature. J Mech Sci Technol 22, 1111–1120 (2008). https://doi.org/10.1007/s12206-008-0310-3
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12206-008-0310-3