Abstract
The purpose of this paper is to determine the optimal shape of double curvature concrete arch dams by using the sensitivity of design objective to design variables. Design sensitivities quantify the relationship between the design variables such as thickness of crown cantilever, left and right abutment thickness, crown cantilever upstream profile, radius of curvature of water and air faces on one hand and the objective function such as the volume of the concrete arch dam on the other hand. For this aim, first a methodology was developed to provide interface between a finite element method and an optimization algorithm for shape optimization of double curvature concrete arch dams. The constraint conditions are the geometric shape, stress and stability against sliding. Second, the shape optimization of an arch dam was analyzed by using the developed system for sensitivity analysis. The results show that all of the design variables contribute significant and none can be ignored in design. Moreover the crown cantilever upstream profile and Radius of curvature of water face left denoted by USP7 and RLUS16 respectively, show less important role as compared to other design variables.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Akbari, J., Kim, N. H., and Ahmadi, M. T. (2010). “Shape sensitivity analysis with design-dependent loadings equivalence between continuum and discrete derivatives.” Structural and Multidisciplinary Optimization, Vol. 40, Nos. 1–6, pp. 353–364, DOI: 10.1007/s00158-009-0374-4.
Conover, W. J. (1980). “Practical nonparametric statistics.” John Wiley & Sons, New York.
Duan, Y., Yuan, W., and Liu, H. B. (2014). “Shape optimization for arch dam with sequential quadratic programming method.” In Applied Mechanics and Materials, Vol. 580, pp. 1961–1965.
Ekström, P. A. (2005). Eikos: A simulation toolbox for sensitivity analysis in Matlab, Uppsala University, Uppsala.
Foscarini, F., Bellocchi, G., Confalonieri, R., Savini, C., and VandenEede, G. (2010). “Sensitivity analysis in fuzzy systems.” Integration of SimLab and DANA. Environmental Modelling & Software, pp. 1256–1260, DOI: 10.1016/j.envsoft.2010.03.024.
Grigorov, S., Tasev, S., Tzenkov, A., Fanelli, M., and Gunn, R. (2009). “Arch dam shape optimization procedure accounting for dam seismic response.” Proceedings of the 11th National Congress on Theoretical and Applied Mechanics.
Hamby, D. M. (1994). “A review of techniques for parameter sensitivity analysis of environmental models.” Environmental monitoring and assessment, Vol. 32, No. 2, pp.135–154, DOI: 10.1007/BF00547132.
Kwak, B. M. (1994). “A review on shape optimal design and sensitivity analysis.” Journal of structure mechanic earthquake engineering, Vol. 10, No. 4, pp. 1–16.
McKay, M. D., Beckman, R. J., and Conover, W. J. (1979). “Comparison of three methods for selecting values of input variables in the analysis of output from a computer code.” Technometrics, Vol. 21, No. 2, pp. 239–245, DOI: 10.1080/00401706.1979.10489755.
Mota Soares, C. M., Mota Soares, C. A., and Barbosa, J. I. (1994). “Sensitivity analysis and optimal design of thin shells of revolution.” AIAA Journal, Vol. 32, No. 5, pp. 1034–1042, DOI: 10.2514/3.12091.
Pourbakhshian, S. and Ghaemain, M. (2015). “Investigating stage construction in high concrete arch dams.” Indian Journal of Science and Technology, Vol. 8, No. 14, DOI: 10.17485/ijst/2015/v8i14/69510.
Saltelli, A., Ratto, M., Andres, T., Campolongo, F., Cariboni, J., Gatelli, D., Saisana, M., and Tarantola, S. (2008). Global sensitivity analysis, the primer. John Wiley & Sons.
Saltelli, A., Tarantola, S., Campolongo, F., and Ratto, M. (2004). “Sensitivity analysis in practice.” A guide to assessing scientific models, John Wiley & Sons.
Seyedpoor, S. M., Salajegheh, J., Salajegheh, E., and Golizadeh, S. (2011). “Optimal design of arch dams subjected to earthquake loading by a combination of simultaneous perturbation stochastic approximation and particle swarm algorithms.” Journal of Applied Soft Computing Applied Soft Computing, Vol. 11, pp. 39–48, DOI: 10.1016/j.asoc.2009.10.014.
SimLab ver.3.2.6 (2009). “Development framework for uncertainty and sensitivity analysis.” Joint Research Centre of the European Commission, Econometric sand Applied Statistics, Ispra, Italy.http://simlab.jrc.ec.europa.eu.
Takalloozadeh, M. and Ghaemian, M. (2014). “Shape optimization of concrete arch dams considering abutment stability.” SCIENTIA IRANICA, Vol. 21, No. 4, pp. 1297–1308.
Zhang, X. F., Li, S. Y., and Chen, Y. L. (2009). “Optimization of geometric shape of Xiamen arch dam”. Advances in engineering software, Vol. 40, No. 2, pp. 105–109, DOI: 10.1016/j.advengsoft.2008.03.013.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Pourbakhshian, S., Ghaemain, M. Shape optimization of arch dams using sensitivity analysis. KSCE J Civ Eng 20, 1966–1976 (2016). https://doi.org/10.1007/s12205-015-0135-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-015-0135-4