Abstract
The U.S. Marines’ and U.S. Army’s next-generation, titanium-intensive M777 howitzer offers reduced weight, increased mobility, and improved survivability over its aging, M198 steel-based predecessor. The National Center for Excellence in Metalworking Technology (NCEMT), operated by Concurrent Technologies Corporation, is helping to meet M777 program goals for cost, performance, and production schedule by developing near-net-shape manufacturing routes for traditionally machined and welded components. Under two projects sponsored by the Navy Manufacturing Technology Program, the NCEMT has developed investment cast spade and saddle components as well as flowformed tubes and forged bell housings. This paper summarizes the results of the two ongoing projects.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Christopher Hatch and Robert Nestor, “Military Makeover the Investment Casting Way,” Modern Casting, 93 (12) (December 2003), pp. 30–32.
Frank Hoerster and Jeffrey Boulet, “Investment Castings Pioneer New Applications,” Foundry Management & Technology, 112 (6) (June 2004), pp. 14–17.
B.E. Hurless and F.H. Froes, “Cutting the Cost of Titanium,” Advanced Materials & Processes, 160 (12) (2002), pp. 37–40.
F.H. Froes, M. Ashraf Imam, and Derek Fray, eds., Cost-Affordable Titanium (Warrendale, PA: TMS, 2004).
S.J. Gerdemann, “Titanium Process Technologies,” Advanced Materials & Processes, 159 (7) (2001), pp. 41–43.
K.O. Yu, “RMILow-Cost Titanium Perspective” (Paper presented at NCEMT Low-Cost Titanium Workshop: Applications for Ship and Ground Vehicle Structures, Baltimore, MD, 10–11 December 2003).
G. Crowley, “How to Extract Low-Cost Titanium,” Advanced Materials & Processes, 161 (11) (2003), pp. 25–27.
L.V. Sieck et al., “The Utilization of Recycled Titanium Ores and Innovative Plasma Arc Technology for the Production of Low Cost Titanium Metal Powders,” in Ref. 4, pp. 127–134.
F.H. (Sam) Froes, M.A. Imam, and D. Fray, “Cost Affordable Titanium—Is It Possible?,” in Ref. 4, pp. 3–8.
E.H. Kraft, “Economic Analysis of the Application of Emerging Reduction Technologies to Mill Products Production,” in Ref. 4, pp. 27–34.
S. Luckowski, “The Evolution of Titanium in Army Armament and Ground Vehicle Systems” (Paper presented at NCEMT Low-Cost Titanium Workshop: Applications for Ship and Ground Vehicle Structures, Baltimore, MD, 10–11 December 2003).
J.S. Montgomery et al., “Low-Cost Titanium Armors for Combat Vehicles,” JOM, 49 (5) (1997), pp. 45–47.
Y. Kosaka and S.P. Fox, “Recent Developments in the Manufacturing of Low Cost Titanium Alloys,” High Performance Metallic Materials for Cost Sensitive Applications, ed. F.H. Froes et al. (Warrendale, PA: TMS, 2002), pp. 35–42.
J.J. Scutti, “Flowformed Titanium Tubular Products,” Advanced Materials & Processes, 159 (1) (2001), pp. 69–70.
D. Rugg and D. Fray, “The Role of Net Shape Manufacture in Reducing Life Cycle Costs of Gas Turbine Components,” in Ref. 4, pp. 35–42.
M. Samandi et al., “The Development of Plasma Transferred Arc Solid Free Form Fabrication as a Cost Effective Production Methodology,” Proc. of 2nd Int’l Surface Engineering Congress, (Materials Park, Ohio: ASM International), pp. 513–519.
M. Guclu, I. Ucok, and J.R. Pickens, “Effect of Oxygen Content on Properties of Cast Alloy Ti-6Al-4V,” in Ref. 4, pp. 135–143.
D. Lee et al., “Thin Wall Titanium Structural Castings,” Advanced Materials & Processes, 161 (5) (2003), pp. 21–24.
G. Broihanne and J. Banister, “Using Cold-Crucible Melting for Titanium Precision Castings,” JOM, 52 (5) (2000), pp. 21–23.
S. Reed and J. Narayan, “Induction Skull Melting Offers Ti Investment Casting Benefits,” Industrial Heating, www.industrialheating.com.
J. Oganmo, “Metal Zapper,” Design News, 59 (7) (2004), pp. 59–64.
Low Cost Titanium Database (Johnstown, PA: National Center for Excellence in Metalworking Technology), LowCostTi.ctc.com.
J.R. Pickens, “Low Cost Titanium for Ships and Military Ground Vehicles,” Advanced Materials & Processes, 162 (5) May 2004, pp. 37–39.
Author information
Authors and Affiliations
Additional information
For more information, contact Kevin L. Klug, Concurrent Technologies Corporation, 100 CTC Drive, Johnstown, PA 15904; (814) 269-2868; e-mail klugk@ctc.com.
Rights and permissions
About this article
Cite this article
Klug, K.L., Ucok, I., Gungor, M.N. et al. The near-net-shape manufacturing of affordable titanium components for the M777 lightweight howitzer. JOM 56, 35–41 (2004). https://doi.org/10.1007/s11837-004-0250-z
Issue Date:
DOI: https://doi.org/10.1007/s11837-004-0250-z