Abstract
The issue of E-waste disposal is concerning all the stakeholders, from policymakers to the end users which have accelerated the research and development on environmentally sound disposal of E-waste. The recovery of metals (gold, tantalum, copper, iron etc.) from E-waste has become an important focus. The mechanical recycling, thermo-chemical processes like pyrolysis, pyro-, hydro- and biometallurgical processes can play important roles in the Metal Recovery from E-waste (MREW) technology. For the industrial application of the MREW technology, it is important to analyze the sustainability. In this paper, two case studies have been presented on E-waste recycling industries in India and China. Based on the literature data, an attempt has been made to assess qualitatively the overall sustainability of MREW technology considering the three pillars, i.e., environmental, economic and social. Two conceptual frameworks with (Option-2) and without (Option-1) pyrolysis for integrated MREW units have been developed and the generalized energy and environmental impact analysis has been made using the principles of LCA. The impacts of two options have been compared. Option 2 has been found to be more efficient and sustainable. It has been realized that climate change, fossil fuel depletion, water depletion, eutrophication, acidification, fresh and marine water ecotoxicity are possible impact categories. The recommendations based on the generalized assessment are in good agreement with the findings of previous researchers on individual steps of MREW unit. The findings of this paper are expected to be beneficial to researchers and stakeholders for research directions and decision making on MREW.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Alan N, de Klerk B J, William D D, Petrus B (2005). Recovery of precious metal from sulphide minerals by bioleaching. US Patent No. 6860919 (B1)
Alston S M, Arnold J C (2011). Environmental impact of pyrolysis of mixed WEEE plastics Part 2: Life cycle assessment. Environ Sci Technol, 45(21): 9386–9392
Antrekowitsch H, Potesser M, Spruzina W, Prior F (2006). Metallurgical recycling of electronic scrap. In: Proceedings of the EPD Congress (899–908)
Baldé C P, Wang F, Kuehr R, Huisman J (2015). The global E-waste monitor–2014. United Nation University
Bas A D, Deveci H, Yazici E Y (2013). Bioleaching of copper from low grade scrap TV circuit boards using mesophilic bacteria. Hydrometallurgy, 138: 65–70
Bosshard P P, Bachofen R, Brandl H (1996). Metal leaching of fly ash from municipal waste incineration by Aspergillusniger. Environ Sci Technol, 30(10): 3066–3070
Brandl H, Bosshard R, Wegmann M (2001). Computer-munching microbes: Metal leaching from electronic scrap by bacteria and fungi. Hydrometallurgy, 59(2): 319–326
Catalyst C (India) Pvt. Ltd. (2015). A brief report on electronics industry in India. Available online at: http://www.cci.in/pdfs/surveys-reports/Electronics-Industry-in-India.pdf (Accessed January 4, 2016)
Chmielewski A G, Urbanski T S, Migdal W (1997). Separation technologies for metals recovery from industrial wastes. Hydrometallurgy, 45(3): 333–344
Cui J, Zhang L (2008). Metallurgical recovery of metals from electronic waste: A review. J Hazard Mater, 158(2-3): 228–256
Darnall D W, Greene B, Henzl M T, Hosea J M, McPherson R A, Sneddon J, Alexander M D (1986). Selective recovery of gold and other metal ions from an algal biomass. Environ Sci Technol, 20(2): 206–208
De Marco I, Caballero B M, Chomón M J, Laresgoiti M F, Torres A, Fernández G, Arnaiz S (2008). Pyrolysis of electrical and electronic wastes. J Anal Appl Pyrolysis, 82(2): 179–183
Debnath B, Roychowdhury P, Kundu R (2016). Electronic Components (EC) reuse and recycling—A new approach towards WEEE management. Procedia Environ Sci, 35: 656–668
E-waste Guide Info. The composition of valuable substances in E-waste. Available online at: http://ewasteguide.info (Accessed September 18, 2016).
Faramarzi M A, Stagars M, Pensini E, Krebs W, Brandl H (2004). Metal solubilization from metal-containing solid materials by cyanogenic-Chromobacteriumviolaceum. J Biotechnol, 113(1-3): 321–326
Ghodrat M, Rhamdhani M A, Brooks G, Rashidi M, Samali B (2017). A thermodynamic-based life cycle assessment of precious metal recycling out of waste printed circuit board through secondary copper smelting. Environ Dev, 24: 36–49
Ghosh S K, Debnath B, Baidya R, De D, Li J, Ghosh S K, Zheng L, Awasthi A K, Liubarskaia M A, Ogola J S, Tavares A N (2016). Waste electrical and electronic equipment management and Basel Convention compliance in Brazil, Russia, India, China and South Africa (BRICS) nations. Waste Manag Res, 34(8): 693–707
Ghosh S K, Singh N, Debnath B, De D, Baidya R, Biswas N T, Ghosh S K, Lili L, Dey P K, Li J (2014) E-waste supply chain management: Findings from pilot studies in India, China, Taiwan (ROC) and the UK. In: Proceedings of the 9th international conference on waste management and technology, Beijing, China, 29–31 October, China: Basel Convention Regional Centre for Asia and Pacific, 1131–1140
Gibson R W, Goodman P D, Holt L, Dalrymple I M, Fray D J (2003). U. S. Patent No. 6,641,712. Washington, DC: U.S. Patent and Trademark Office.
Guo Q, Yue X, Wang M, Liu Y (2010). Pyrolysis of scrap printed circuit board plastic particles in a fluidized bed. Powder Technol, 198(3): 422–428
Hagelüken C (2006). Recycling of electronic scrap at Umicore’s integrated metals smelter and refinery. Erzmetall, 59(3): 152–161
Hall W J, Miskolczi N, Onwudili J, Williams P T (2008). Thermal processing of toxic flame-retarded polymers using a waste fluidized catalytic cracker (FCC) catalvst. Energy Fuels, 22(3): 1691–1697
Hall W J, Williams P T (2007). Analysis of products from the pyrolysis of plastics recovered from the commercial scale recycling of waste electrical and electronic equipment. J Anal Appl Pyrolysis, 79(1): 375–386
Huisman J (2010). WEEE recast: from 4 kg to 65%: the compliance consequences. UNU Expert opinion on the EU WEEE Directive. United Nations University, Bonn, Germany
Iannicelli-Zubiani E M, Giani M I, Recanati F, Dotelli G, Puricelli S, Cristiani C (2017). Environmental impacts of a hydrometallurgical process for electronic waste treatment: A life cycle assessment case study. J Clean Prod, 140: 1204–1216
Ilyas S, Lee J C (2014). Biometallurgical recovery of metals from waste electrical and electronic equipment: a review. ChemBioEng Reviews, 1(4): 148–169
Kang H Y, Schoenung J M (2005). Electronic waste recycling: A review of US infrastructure and technology options. ResourConserv Recycling, 45(4): 368–400
Khaliq A, Rhamdhani M A, Brooks G, Masood S (2014). Metal extraction processes for electronic waste and existing industrial routes: a review and Australian perspective. Resources, 3(1): 152–179
Kim E Y, Kim M S, Lee J C, Pandey B D, Pandey B D (2011). Selective recovery of gold from waste mobile phone PCBs by hydrometallurgical process. J Hazard Mater, 198: 206–215
Kim E Y, Lee J C, Kim B S, Kim M S, Jeong J (2007). Leaching behavior of nickel from waste multi-layer ceramic capacitors. Hydrometallurgy, 86(1): 89–95
Kolodzziej B, Adamski Z (1984). A ferric chloride hydrometallurgical process for recovery of silver from electronic scrap materials. Hydrometallurgy, 12(1): 117–127
Koyanaka S, Endoh S, Ohya H, Iwata H (1997). Particle shape of copper milled by swing-hammer-type impact mill. Powder Technol, 90(2): 135–140
Kuyucak N, Volesky B (1988). Biosorbents for recovery of metals from industrial solutions. BiotechnolLett, 10(2): 137–142
Li J, Xu Z, Zhou Y (2007). Application of corona discharge and electrostatic force to separate metals and nonmetals from crushed particles of waste printed circuit boards. J Electrost, 65(4): 233–238
Ling T C, Poon C S (2012). Development of a method for recycling of CRT funnel glass. Environ Technol, 33(22-24): 2531–2537
Liu W W, Hu C W, Yang Y, Tong D M, Zhu L F, Zhang R N, Zhao B H (2013). Study on the effect of metal types in (Me)-Al-MCM-41 on the mesoporous structure and catalytic behavior during the vaporcatalyzed co-pyrolysis of pubescens and LDPE. ApplCatal B, 129: 202–213
McMahon P (2016) Electronic waste expected to rise by 21% in 2018. Available online at: http://clareherald.com/2016/08/electronic-wasteexpected-to-rise-by-21-in-2018/(Accessed September 5, 2016)
Mecucci A, Scott K (2002). Leaching and electrochemical recovery of copper, lead and tin from scrap printed circuit boards. J ChemTechnolBiotechnol, 77(4): 449–457
Mitrasinovic A, Pershin L, Mostaghimi J (2013). Electronic waste treatment by high enthalpy plasma jet. International plasma chemistry society (IPCS20) Philadelphia USA
Niu H, Volesky B (1999). Characteristics of gold biosorption from cyanide solution. J ChemTechnolBiotechnol, 74(8): 778–784
Ogunniyi I O, VermaakMK G (2009). Investigation of froth flotation for beneficiation of printed circuit board comminution fines. Miner Eng, 22(4): 378–385
Peng M, Layiding W, Dong X, Jiangang G, Guanghong D (2004). A physical process for recycling and reusing waste printed circuit boards. In: Electronics and the Environment, 2004. Conference Record. 2004 IEEE International Symposium, 237–242
Petter P M H, Veit H M, Bernardes A M (2014). Evaluation of gold and silver leaching from printed circuit board of cellphones. Waste management, 34(2), 475–482.
Qiu K Q, Wu Q, Zhan Z H (2009). Vacuum pyrolysis characteristics of waste printed circuit boards epoxy resin and analysis of liquid products. Journal of Central South University: Science and Technology, 40(5): 1209–1215
Quinet P, Proost J, Van Lierde A (2005). Recovery of precious metals from electronic scrap by hydrometallurgical processing routes. Miner Metall Process, 22(1): 17–22
Rath S S, Nayak P, Mukherjee P S, Chaudhury G R, Mishra B K (2012). Treatment of electronic waste to recover metal values using thermal plasma coupled with acid leaching–A response surface modeling approach. Waste management, 32(3), 575–583
Ruidian T, Tonghua W, Suxia T, Xinzhan H, Tao W (2007). Products from microwave heating of waste printed circuit boards. Environmental Pollution & Control, 8, 013
Ruj B, Chang J (2013). E-waste (Cell Phone) Treatment By Thermal Plasma Technique. In: Proceedings of the 7th International Symposium on Feedstock Recycling of Polymeric Materials (7th ISFR 2013), New Delhi, India
Schinner F, Burgstaller W (1989). Extraction of zinc from industrial waste by a Penicillium sp. Appl Environ Microbiol, 55(5): 1153–1156
Shamsuddin M (1986). Metal recovery from scrap and waste. JOM, 38 (2): 24–31
Sheng P P, Etsell T H (2007). Recovery of gold from computer circuit board scrap using aqua regia. Waste Manag Res, 25(4): 380–383
Sun J, Wang W, Liu Z, Ma Q, Zhao C, Ma C (2012). Kinetic study of the pyrolysis of waste printed circuit boards subject to conventional and microwave heating. Energies, 5(9): 3295–3306
Sun L, Lu J, Wang S, Zhang J, Zhou H (2003). Experimental research on pyrolysis characteristics of printed circuit board wastes. Journal of Chemical Industry and Engineering-China, 54(3): 408–412
Sun Z, Cao H, Xiao Y, Sietsma J, Jin W, Agterhuis H, Yang Y (2016). Toward sustainability for recovery of critical metals from electronic waste: The hydrochemistry processes. ACS Sustain Chem&Eng, 5 (1): 21–40
Tippayawong N P, Khongkrapan P (2009). Development of a laboratory scale air plasma torch and its application to electronic waste treatment. Int J Environ Sci Technol, 6(3): 407–414
Tsezos M, Remoundaki E, Hatzikioseyian A (2006). Biosorptionprinciples and applications for metal immobilization from wastewater streams. In: Proceedings of the EU-Asia Workshop on Clean Production and Nanotechnologies. Seoul, 23–33
Umair S, Björklund A, Petersen E E (2015). Social impact assessment of informal recycling of electronic ICT waste in Pakistan using UNEP SETAC guidelines. ResourConserv Recycling, 95: 46–57
United Nations Department of Economic. (2007). Indicators of sustainable development: Guidelines and methodologies. United Nations Publications
Veit H M, Bernardes A M, Ferreira J Z, Tenório J A S, de Fraga Malfatti C (2006). Recovery of copper from printed circuit boards scraps by mechanical processing and electrometallurgy. J Hazard Mater, 137 (3): 1704–1709
Veit H M, Diehl T R, Salami A P, Rodrigues J D S, Bernardes A M, Tenório J A S (2005). Utilization of magnetic and electrostatic separation in the recycling of printed circuit boards scrap. Waste Management, 25(1), 67–74
Vidyadhar A, Das A (2012). Kinetics and Efficacy of Froth Flotation for the Recovery of Metal Values from Pulverized Printed Circuit Boards In: Proceedings of XXVI International Mineral Processing Congress (IMPC) 2012, September 24-28, 2012, Hotel Ashok, Diplomatic Enclave, New Delhi, India, 236–243
Wang J, Bai J, Xu J, Liang B (2009). Bioleaching of metals from printed wire boards by Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans and their mixture. J Hazard Mater, 172(2-3): 1100–1105
Wu Z, Yuan W, Li J, Wang X, Liu L, Wang J (2017). A critical review on the recycling of copper and precious metals from waste printed circuit boards using hydrometallurgy. Front Environ Sci Eng, 11(5): 8
Xiong Z H, Li H B, Wu C Z, Chen Y (2006). A study on pyrolysis and kinetics of printed circuit boards wastes. Techniques and Equipment for Environmental Pollution Control, 10, 010
Yang C, Li J, Tan Q, Liu L, Dong Q (2017a). Green process of metal recycling: Co-processing waste printed circuit boards and spent tin stripping solution. ACS Sustain Chem&Eng, 5(4): 3524–3534
Yang C, Tan Q, Liu L, Dong Q, Li J (2017b). Recycling Tin from electronic waste: A problem that needs more attention. ACS Sustain Chem&Eng, 5(11): 9586–9598
Yang T, Xu Z, Wen J, Yang L (2009). Factors influencing bioleaching copper from waste printed circuit boards by Acidithiobacillus ferrooxidans. Hydrometallurgy, 97(1): 29–32
Zhang S, Forssberg E (1998). Optimization of electrodynamic separation for metals recovery from electronic scrap. ResourConserv Recycling, 22(3): 143–162
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Debnath, B., Chowdhury, R. & Ghosh, S.K. Sustainability of metal recovery from E-waste. Front. Environ. Sci. Eng. 12, 2 (2018). https://doi.org/10.1007/s11783-018-1044-9
Received:
Revised:
Accepted:
Published:
DOI: https://doi.org/10.1007/s11783-018-1044-9