Abstract
In order to evaluate the effects of mesh generation techniques and grid convergence on pump performance in centrifugal pump model, three widely used mesh styles including structured hexahedral, unstructured tetrahedral and hybrid prismatic/tetrahedral meshes were generated for a centrifugal pump model. And quantitative grid convergence was assessed based on a grid convergence index (GCI), which accounts for the degree of grid refinement. The structured, unstructured or hybrid meshes are found to have certain difference for velocity distributions in impeller with the change of grid cell number. And the simulation results have errors to different degrees compared with experimental data. The GCI-value for structured meshes calculated is lower than that for the unstructured and hybrid meshes. Meanwhile, the structured meshes are observed to get more vortexes in impeller passage. Nevertheless, the hybrid meshes are found to have larger low-velocity area at outlet and more secondary vortexes at a specified location than structured meshes and unstructured meshes.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
DAI Cui, KONG Fan-yu, DONG Liang. Pressure fluctuation and its influencing factors in circulating water pump [J]. Journal of Central South University, 2013, 20: 149–155.
DERAKHSHAN S, NOURBAKHSH A. Theoretical, numerical and experimental investigation of centrifugal pumps in reverse operation [J]. Experimental Thermal and Fluid Science, 2008, 32(8): 1620–1627.
ZHU Xiao-hua, LI Jia-nan, TONG Hua. Mechanism analysis and process optimization of sand and plug removal with rotating jet in horizontal well [J]. Journal of Central South University, 2013, 20: 1631–1637.
LIU Hou-lin, REN Yun, WANG Kai, WU Deng-hao, RU Wei-min, TAN Ming-gao. Research of inner flow in a double blades pump based on openfoam [J]. Journal of Hydrodynamics, 2012, 24: 226–334.
Yl Qian. CFD Application in implantable Rotary blood pump design and validation [J]. Journal of Shanghai University (Natural Science), 2004, 10: 194–197. (in Chinese)
CELIK I B, GHIA U, ROACHE P J. Procedure for estimation and reporting of uncertainty due to discretization in CFD applications [J]. Journal of Fluids Engineering, 2008, 130(7): 1–4.
FREITAS C J. The issue of numerical uncertainty [J]. Applied Mathematical Modelling, 2002, 26(2): 237–248.
ROACHE P J. Perspective: A method for uniform reporting of grid refinement studies [J]. Journal of Fluids Engineering, 1994, 116: 405–405.
OBERKAMPF W L, TRUCANO T G. Verification and validation in computational fluid dynamics [J]. Progress in Aerospace Sciences, 2002, 38(3): 209–272.
RICHARDSON L F. The approximate arithmetical solution by finite differences of physical problems involving differential equations, with an application to the stresses in a masonry dam [J]. Philosophical Transactions of the Royal Society of London. Series A, Containing Papers of a Mathematical or Physical Character, 1911, 210: 307–357.
KARIMI M, AKDOGAN G, DELLIMORE K H, BRADSHAWA S M. Quantification of numerical uncertainty in computational fluid dynamics modelling of hydrocyclones [J]. Computers & Chemical Engineering, 2012, 43: 45–54.
ELSAYED K, LACOR C. The effect of cyclone inlet dimensions on the flow pattern and performance [J]. Applied Mathematical Modeling, 2011, 35(4): 1952–1968.
LIJO V, KIM H D, SETOGUCHI T. Analysis of choked viscous flows through a constant area duct [J]. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 2010, 224(11): 1151–1162.
TANNEHILL J C, ANDERSON D D A, PLETCHER R H. Computational fluid mechanics and heat transfer [M]. Boca Raton: CRC Press, Taylor & Francis, 1997: 1–10.
FERZIGER J H, PERIĆ M. Computational methods for fluid dynamics [M]. Berlin: Springer, 1996: 160.
ZHOU Shui-qing, KONG Fan-yu, WANG Zhi-qiang, YI Chun-long, ZHANG Yong. Numerical simulation for low specific-speed centrifugal pump with structured grid [J]. Transactions of the Chinese Society of Agricultural Machinery, 2011, 42(7): 66–69. (in Chinese)
LONGEST P, VINCHURKAR S. Effects of mesh style and grid convergence on particle deposition in bifurcating airway models with comparisons to experimental data [J]. Medical Engineering & Physics, 2007, 29(3): 350–366.
LIU Y, PEKKAN K, JONES S C, YOGANATHAN A P. The effects of different mesh generation methods on computational fluid dynamic analysis and power loss assessment in total cavopulmonary connection [J]. Journal of Biomechanical Engineering, 2004, 126(5): 594–603.
LIU Hou-lin, LIU Ming-ming, DONG Liang, DU Hui. Effects of grid types on numerical calculation accuracy of centrifugal pump [J]. Journal of Huazhong University of Science and Technology (Natural Science Edition), 2013, 41(10): 64–67. (in Chinese)
ROY C J. Grid convergence error analysis for mixed-order numerical schemes [J]. AIAA Journal, 2003, 41(4): 595–604.
ROACHE P J. Computational fluid dynamics [M]. Albuquerque: Hermosa, 1976: 286–287.
Author information
Authors and Affiliations
Corresponding author
Additional information
Foundation item: Projects(51109095, 51179075, 51309119) supported by the National Natural Science Foundation of China, Project(BE2012131) supported by Science and Technology Support Program of Jiangsu Province, China
Rights and permissions
About this article
Cite this article
Liu, Hl., Liu, Mm., Bai, Y. et al. Effects of mesh style and grid convergence on numerical simulation accuracy of centrifugal pump. J. Cent. South Univ. 22, 368–376 (2015). https://doi.org/10.1007/s11771-015-2531-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11771-015-2531-9