Abstract
This paper addresses practical sizing optimization of deployable and scissor-like structures from a new point of view. These structures have been recently highly regarded for beauty, lightweight, determine behavior, proper performance against lateral loads and the ability of been compactly packaged. At this time, there is a few studies done considering practical optimization of these structures. Loading considered here includes wind and gravity loads. In foldable scissor-like structures, connections have a complex behavior. For this reason, in this study, the authors used the ABAQUS commercial package as an analyzer in the optimization procedure. This made the obtained optimal solutions highly reliable from the point of view of applicability and construction requirements. Also, to do optimization task, a fast genetic algorithm method, which has been recently introduced by authors, was utilized. Optimization results show that despite less weight for aluminum models than steel models, aluminum deployable structures are not affordable because they need more material than steel structures and cause more environmental damage.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Gantes C J. Deployable Structures: Analysis and Design. Southampton: Wit Press, 2001
Rhode-Barbarigos L G. An active deployable tensegrity structure. Dissertation for the Doctoral Degree. Lausanne: Federal Institute of Technology in Lausanne, 2012
Pinero E P. Project for a mobile theatre. Architectural Design, 1961, 12(1): 154–155
Chilton J. Space Grid Structures. Abingdon: Taylor & Francis, 2007
Friedman N, Farkas G. Roof structures in motion-on retractable and deployable roof structures enabling quick construction or adaption to external excitations. Concrete Structures, 2011, 12: 41–50
Gantes C J, Connor J J, Logcher R D, Rosenfeld Y. Structural analysis and design of deployable structures. Computers & Structures, 1989, 32(3–4): 661–669
Valcarcef J P, Escrig F. Recent advances in the analysis of expandable structures. In: Escrig F, Brebbia C A, eds. Mobile and Rapidly Assembled Structures II (Vol. 21). Southampton: Computational Mechanics Publications, 1996, 45–54
Calatrava S. Study on the foldability of trusses. Dissertation for the Doctoral Degree. Zurich: Swiss Federal Institute of Technology Zurich, 1981
Zeigler T R. US Patent 4026313. 1977-05-31
Hernández C H, Zalewski W. Expandable structure for the Venezuelan Pavilion at Expo’92. In: Proceedings of International Conference on Space Structures. 1993, 1710–1719
Escrig F. Expandable space frame structures. In: Proceedings of the 3rd International Conference on Space Structures. Guildford: Elsevier, 1984, 845–850
Rosenfeld Y, Logcher R D. New concepts for deployablecollapsible structures. International Journal of Space Structures, 1988, 3(1): 20–32
Shan W. Foldable space structures. Dissertation for the Doctoral Degree. Surrey: University of Surrey, 1990
Langbecker T, Albermani F. Kinematic and non-linear analysis of foldable barrel vaults. Engineering Structures, 2001, 23(2): 158–171
Gantes C, Connor J J, Logcher R D. Combining numerical analysis and engineering judgment to design deployable structures. Computers & Structures, 1991, 40(2): 431–440
Raphael B, Smith I F. A direct stochastic algorithm for global search. Applied Mathematics and Computation, 2003, 146(2–3): 729–758
Dizangian B, Ghasemi M R. A fast marginal feasibility search method in size optimization of truss structures. Asian Journal of Civil Engineering, 2015, 16(5): 567–585
Dizangian B, Ghasemi M R. Ranked-based sensitivity analysis for size optimization of structures. Journal of Mechanical Design, 2015, 137(12): 121402
Imai K, Schmit L A. Configuration optimization of trusses. Journal of the Structural Division, 1981, 107(5): 745–756
Ghasemi H, Park H S, Rabczuk T. A multi-material level set-based topology optimization of flexoelectric composites. Computer Methods in Applied Mechanics and Engineering, 2018, 332: 47–62
Nanthakumar S S, Lahmer T, Zhuang X, Park H S, Rabczuk T. Topology optimization of piezoelectric nanostructures. Journal of the Mechanics and Physics of Solids, 2016, 94: 316–335
Ghasemi H, Park H S, Rabczuk T. A level-set based IGA formulation for topology optimization of flexoelectric materials. Computer Methods in Applied Mechanics and Engineering, 2017, 313: 239–258
Nanthakumar S S, Zhuang X, Park H S, Rabczuk T. Topology optimization of flexoelectric structures. Journal of the Mechanics and Physics of Solids, 2017, 105: 217–234
Holland J H. Adaptation in Natural and Artificial Systems: An Introductory Analysis with Applications to Biology, Control, and Artificial Intelligence. Cambridge: MIT Press, 1992
Ghasemi M R, Hinton E, Wood R D. Optimization of trusses using genetic algorithms for discrete and continuous variables. Engineering Computations, 1999, 16(3): 272–303
Salar M, Ghasemi M R, Dizangian B. A fast GA-based method for solving truss optimization problems. International Journal of Optimization in Civil Engineering, 2015, 6(1): 101–114
Lee K S, Geem Z W. A new structural optimization method based on the harmony search algorithm. Computers & Structures, 2004, 82(9–10): 781–798
merican Institute of Steel Construction (AISC). Manual of Steel Constructional Low Able Stress Design. 9th ed. Chicago: American Institute of Steel Construction, 1989
ational Building Code of Canada. Canadian Commission on Building and Fire Codes. Volume 1. 2005
Nooshin H, Disney P. Formex configuration processing II. International Journal of Space Structures, 2001, 16(1): 1–56
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Salar, M., Ghasemi, M.R. & Dizangian, B. Practical optimization of deployable and scissor-like structures using a fast GA method. Front. Struct. Civ. Eng. 13, 557–568 (2019). https://doi.org/10.1007/s11709-018-0497-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11709-018-0497-z