Abstract
In an effort to improve the silicon carbide (SiC) substrate surface, a new electro-chemical mechanical polishing (ECMP) technique was developed. This work focused on the Si-terminated 4H-SiC (0001) substrates cut 8° off-axis toward 〈1120〉. Hydrogen peroxide (H2O2) and potassium nitrate (KNO3) were used as the electrolytes while using colloidal silica slurry as the polishing medium for removal of the oxide. The current density during the polishing was varied from 10 µA/cm2 to over 20 mA/cm2. Even though a high polishing rate can be achieved using high current density, the oxidation rate and the oxide removal rate need to be properly balanced to get a smooth surface after polishing. A two-step ECMP process was developed, which allows us to separately control the anodic oxidation and removal of formed oxide. The optimum surface can be achieved by properly controlling the anodic oxidation current as well as the polishing rate. At higher current flow (>20 mA/cm2), the final surface was rough, whereas a smoother surface was obtained when the current density was in the vicinity of 1 mA/cm2. The surface morphology of the as-received wafer, fine diamond slurry (0.1 µm) polished wafer, and EMCP polished wafer were studied by high-resolution atomic force microscopy (AFM).
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
K.H. Lee, M.-H. Hong, K. Teker, C. Jacob, and P. Pirouz, Mater. Res. Soc. Symp. Proc. 622, T6.16 (2001).
N. Onojima, J. Suda, and H. Matsunami, J. Cryst. Growth 237, 1012 (2002).
J. Powell, D.J. Larkin, and P.B. Abel, J. Electron. Mater. 24, 295 (1995).
W.C. Mitchel, J. Brown, D. Buchanan, R. Bertke, K. Mahalingham, F.D. Orazio, Jr., P. Pirouz, H.-J.R. Tseng, U.B. Ramabadran, and B. Roughani, Mater. Sci. Forum 338–342, 841 (2000).
S. Johansson, J.-A. Schweitz, and K.P.D. Lagerlog, J. Am. Ceram. Soc. 72, 1136 (1989).
W. Qian, M. Skowronski, G. Augustine, R.C. Glass, H. McD. Hobgood, and R.H. Hopkins, J. Electrochem. Soc. 142, 4290 (1995).
L. Zhou, V. Audurier, P. Pirouz, and J.A. Powell, J. Electrochem. Soc. 144, L161 (1997).
M. Kikuchi, Y. Takahashi, T. Suga, S. Suzuki, and Y. Bando, J. Am. Ceram. Soc. 75, 189 (1992).
F. Owman, C. Hallin, P. Martensson, and E. Janzen, J. Cryst. Growth 167, 391 (1996).
S.E. Saddow, T.E. Schattner, J. Brown, L. Grazulis, K. Mahalingram, G. Landis, R. Bertke, and W.C. Mitchel, J. Electron. Mater. 30, 228 (2001).
S. Ha, N.T. Nuhfer, M. DeGraef, G.S. Rohrer, and M. Skowronski, Mater. Sci. Forum 338–442, 477 (2000).
D.R. Turner, The Electrochemistry of Semiconductors, ed. P.J. Holmes (London: Academic Press, 1962), p. 179.
A.O. Konstantinov, C.I. Harris, and E. Janzen, Appl. Phys. Lett. 65, 2699 (1994).
A.A. Burk, Jr. and L.B. Rowland, J. Cryst. Growth 167, 586 (1996).
R. Wang (Ph.D. thesis, Rensselaer Polytechnic Institute, 2002).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Li, C., Bhat, I.B., Wang, R. et al. Electro-chemical mechanical polishing of silicon carbide. J. Electron. Mater. 33, 481–486 (2004). https://doi.org/10.1007/s11664-004-0207-6
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/s11664-004-0207-6