Abstract
To support quantitative design of ultra-high-strength (UHS) secondary-hardening steels, the precipitation of cementite prior to the precipitation of the M2C phase is investigated using a model alloy. The microstructure of cementite is investigated by transmission electron microscopy (TEM) techniques. Consistent with earlier studies on tempering of Fe-C martensite, lattice imaging of cementite suggests microsyntactic intergrowth of M5C2 (Hägg carbide). The concentration of substitutional alloying elements in cementite are quantified by high-resolution analytical electron microscopy (AEM) using extraction replica specimens. Quantification of the substitutional elements in cementite confirms its paraequilibrium (PE) state with ferrite at the very early stage of tempering. The implications of these results are discussed in terms of the thermodynamic driving force for nucleation of the primary-strengthening, coherent M2C carbide phase. The ferrite-cementite PE condition reduces the carbon concentration in the ferrite matrix with a significant reduction of M2C driving force. The kinetics of dissolution of PE cementite and its transition to other intermediate states will also influence the kinetics of secondary hardening behavior in UHS steels.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
G.B. Olson: Science, 1997, vol. 277, pp. 1237–42.
G. Ghosh and G.B. Olson: Acta Metall. Mater., 1994, vol. 42, pp. 3361–70.
G. Ghosh and G.B. Olson: Acta Metall. Mater., 1994, vol. 42, pp. 3371–79.
C.J. Kuehmann: Ph.D. Thesis, Northwestern University, Evanston, IL, 1994.
P.M. Machmeier, C.D. Little, M.H. Horowitz, and R.P. Oates: Met. Technol., 1979, vol. 6, pp. 291–96.
J. Montgomery: Ph.D. Thesis, Northwestern University, Evanston, IL, 1990.
G.R. Speich, D.S. Dabkowski, and L.F. Porter: Metall. Trans., 1973, vol. 4, pp. 303–15.
A.J. Allen, D. Gavillet, and J.R. Weertman: Acta Metall. Mater., 1992, vol. 41, pp. 1869–84.
J.S. Montgomery and G.B. Olson: Proc. 34th Army Sagamore Conf. on Innovations in Ultrahigh-Strength Steel in Technology, Lake George, NY, 1987, M. Azrin. G.B. Olson, and E.S. Wright, eds., U.S. Government Printing Office, Washington, DC, 1990, pp. 147–78.
P. Jemain and J.R. Weertman: Northwestern University, Evanston, IL, unpublished research, 1992.
G. Haidemenopoulos, G.B. Olson, and M. Cohen: in Proc. 34th Army Sagamore Conf. on Innovations in Ultrahigh-Strength Steel in Technology, Lake George, NY, 1987, M. Azrin, G.B. Olson, and E.S. Wright, eds., U.S. Government Printing Office, Washington, DC, 1990, pp. 549–93.
H.E. Lippard: Ph.D. Thesis, Northwestern University, Evanston, IL, 1997.
A. Hultgren: Jernkontorets Ann., 1951, vol. 135, p. 403.
M. Hillert: Internal Report, Swedish Institute for Metals Research, Stockholm, 1953.
J.S. Kirkaldy: Can J. Phys., 1958, vol. 36, pp. 899–925.
G.R. Purdy, D.H. Weichert, and J.S. Kirkaldy: Trans. AIME, 1964, vol. 230, pp. 1025–34.
D.E. Coates: Metall. Trans., 1972, vol. 3, pp. 1203–12.
D.E. Coates: Metall. Trans., 1973, vol. 4, pp. 1077–86.
D.E. Coates: Metall. Trans., 1973, vol. 4, pp. 2313–25.
H.K.D.H. Bhadeshia: Progr. Mater. Sci., 1985, vol. 29, pp. 321–86.
M. Hillert and L.-I. Staffansson: Acta Chem. Scand., 1970, vol. 24, pp. 3618–26.
S.S. Babu, K. Hono, and T. Sakurai: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 499–508.
C. Wert: Phys. Rev., 1950, vol. 79, pp. 601–05.
A.W. Bowen and G.M. Leak: Metall. Trans., 1970, vol. 1, pp. 1695–1700.
A.T. Davenport and R.W.K. Honeycombe: Met. Sci., 1975, vol. 9, pp. 201–08.
Smithells Metals Reference Book, 7th ed., E.A. Brandes and G.B. Brook, eds., Butterworth-Heinemann Ltd., Oxford, United Kingdom, 1992, p. 13.20.
J.I. Goldstein, D.B. Williams, and G. Cliff: in Principles of Analytical Electron Microscopy, D.C. Joy, A.D. Romig, Jr., and J.I. Goldstein, eds., Plenum Press, New York, NY, 1986, pp. 155–217.
DTSA: Desk Top Spectrum Analyzer and X-ray Database, Standard Reference Data Program, National Institute of Standards and Technology, Gaithersburg, MD, 1995.
G. Cliff and G.W. Lorimer: J. Microsc., 1975, vol. 103, pp. 203–07.
J.I. Goldstein, D.E. Newbury, P. Echlin, D.C. Joy, C. Fiori, and Eric Lifshin: in Scanning Electron Microscopy and X-ray Microanalysis, Plenum Press, New York, NY, 1984.
C. Nockolds, M.J. Nasir, G. Cliff, and G.W. Lorimer: Proc. Inst. of Physics, Electron Microscopy and Analysis Group, T. Mulvey, ed., Conf. Ser. No. 52, The Institute of Physics, London, 1979, pp. 417–20.
S.J.B. Reed: Electron Microprobe Analysis, Cambridge University Press, Cambridge, United Kingdom, 1975.
S.M. Allen: Phil. Mag. A, 1981, vol. 43, pp. 325–35.
D.B. Williams: Practical Analytical Electron Microscopy in Materials Science, Philips Electronic Instruments, Inc., Electron Optics Publishing Group, Mahwah, NJ, 1987.
B. Sundman, B. Jansson, and J.O. Andersson: CALPHAD, 1985, vol. 9, pp. 153–90.
“Thermo-Calc, version K,” Division of Computational Thermodynamics, Royal Institute of Technology, Stockholm, 1995.
B. Jansson: “Evaluation of Parameters in Thermochemical Models Using Different Types of Experimental Data Simultaneously,” TRITA-MAC-0234, Royal Institute of Technology, Stockholm, 1984.
Scientific Group Thermodata Europe, solution database, 1994.
G. Hägg: Z. Kristallogr., 1934, vol. 89, pp. 92–94.
J. Sênateur and R. Fruchart: C.R. Acad. Sci., Paris, 1963, vol. 256, pp. 3114–17.
M.J. Duggin, D. Cox, and L. Zwell: Trans. AIME, 1966, vol. 236, pp. 1342–46.
J. Crangle and W. Sucksmith: J. Iron Steel Inst., 1951, vol. 168, pp. 141–51.
H. Ino, K. Moriya, and E.F. Fujita: Tetsu-to-Hagané, 1968, vol. 54, pp. 34–47.
K.H. Jack: J. Iron Steel Inst., 1951, vol. 169, pp. 26–36.
Y. Ohmori and S. Sugisawa: Trans. JIM, 1971, vol. 12, pp. 170–78.
Y. Ohmori: Trans. JIM, 1972, vol. 13, pp. 119–27.
Y. Imai, T. Kokura, and A. Inoue: Tetsu-to-Hagané, 1972, vol. 58, pp. 726–40.
A. Koreeda and K. Shimizu: Proc. 5th Int. Conf. High Voltage Electron Microscopy, Kyoto, Japan, 1977, Japan Electron Microscopic Society, Bunkyo-ku, Japan, 1977, pp. 611–14.
S. Nagakura, T. Suzuki, and M. Kusunoki: Trans. JIM, 1981, vol. 22, pp. 699–709.
S. Nagakura, Y. Horotsu, M. Kusunoki, T. Suzuki, and Y. Nakamura: Metall. Trans. A, 1983, vol. 14A, pp. 1025–31.
D. Meinhardt and O. Krisement: Arch. Eisenhüttenwes., 1962, vol. 33, pp. 493–99.
A.I. Gardin: Sov. Phys.-Crystallogr., 1962, vol. 7, pp. 694–700.
F.H. Herbstein and J. Smuts: Acta Crystallogr., 1964, vol. 17, pp. 1331–32.
K.A. Taylor, G.B. Olson, M. Cohen, and J.B. Vander Sande: Metall. Trans. A, 1989, vol. 20A, pp. 2749–65.
J. Mandel: The Statistical Analysis of Experimental Data, Dover Publications, Inc., New York, NY, 1964.
B. Sundman and J. Ågren: J. Phys. Chem. Solids, 1981, vol. 42, pp. 297–301.
M. Hillert and M. Jarl: CALPHAD, 1978, vol. 2, pp. 227–38.
J.B. Gilmour, G.R. Purdy, and J.S. Kirkaldy: Metall. Trans., 1972, vol. 3, pp. 1455–64.
M. Hillert: in The Mechanism of Phase Transformations in Crystalline Solids, The Institute of Metals, London, 1969, pp. 231–47.
M.J. Aziz: J. Appl. Phys., 1982, vol. 53, pp. 1158–68.
Z.-K. Liu, L. Höglund, B. Jönsson, and J. Ågren: Metall. Trans. A, 1991, vol. 22A, pp. 1745–52.
Z.-K. Liu and J. Ågren: Metall. Trans. A, 1991, vol. 22A, pp. 1753–59.
R.-H. Liarng: Ph.D. Thesis, Northwestern University, Evanston, IL, 1996.
C. Knepfler: Ph.D. Thesis, Northwestern University, Evanston, IL, 1994.
C.E. Campbell: Ph.D. Thesis, Northwestern University, Evanston, IL, 1997.
J.S. Langer and A.J. Schwartz: Phys. Rev. A, 1980, vol. 21, pp. 948–58.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Ghosh, G., Olson, G.B. & Campbell, C.E. An analytical electron microscopy study of paraequilibrium cementite precipitation in ultra-high-strength steel. Metall Mater Trans A 30, 501–512 (1999). https://doi.org/10.1007/s11661-999-0042-8
Received:
Issue Date:
DOI: https://doi.org/10.1007/s11661-999-0042-8