Abstract
Previous researches on the mechanical model of toppling failure mainly concentrated on two-dimensional mechanical model (TwDM) analysis. The TwDM analysis assumes the width of the slab beam is unit width without considering the lateral constraint force. The assumed conditions are obviously different from the site conditions, thus there is a certain difference between the calculated results and the field work. A three-dimensional mechanical model (ThDM) of toppling failure was established, considering that the slab beam was mainly subject to self-weight, the frictional resistance of interlayer and lateral constraint force. Due to the progressive characteristics of toppling failure, the concept and the formula of the first fracture depth (FFD) of toppling was raised and constructed. The case study indicates that the ThDM is more effective and can be accurately used to calculate the toppling fracture depth of the slab beam. The FFD decreases proportionally with the increase of slab beam width. FFD grows fast when the slab beam width is less than 2.0 m and it tends to be stable when the slab beam width is above 2.0 m. The FFD decreases with the increase of the lateral constraint coefficient, indicating that the boundary condition of the free space is positively correlated with the stability and depth of toppling. This is a good explanation of the free space effect. This study provides a reference for the stability evaluation and prevention-control design of toppling slope in the future.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Adhikary DP, Dyskin AV, Jewell RJ (1997) A study of the mechanism of flexural toppling failure of rock slopes. Rock Mech Rock Eng 30: 75–93. https://doi.org/10.1007/BF01020126
Adhikary DP, Dyskin AV (2007) Modelling of progressive and instantaneous failures of foliated rock slopes. Rock Mech Rock Eng 40(4): 349–362. https://doi.org/10.1007/s00603-006-0085-8
Alejano LR, Alonso CS, Rey IP, et al. (2018) Block toppling stability in the case of rock blocks with rounded edges. Eng Geol 234: 192–203. https://doi.org/10.1016/j.enggeo.2018.01.010
Amini M, Akbar A, Mohammad HK (2017) Stability analysis of slide-toe-toppling failure. Eng Geol 228: 82–96. https://doi.org/10.1016/j.enggeo.2017.07.008
Amini M, Hassan S, Kamran E (2018) Stability analysis of slopes with a potential of slide-head-toppling failure. Int J Rock Mech Min 112: 108–121. https://doi.org/10.1016/j.ijrmms.2018.09.008
Amini M, Majdi A, Aydan, Ö (2009) Stability analysis and the stabilisation of flexural toppling failure. Rock Mech Rock Eng 42: 751–782. https://doi.org/10.1007/s00603-008-0020-2
Amini M, Majdi A, Veshadi MA (2012) Stability analysis of rock slopes against block flexure toppling failure. Rock Mech Rock Eng 45: 519–532. https://doi.org/10.1007/s00603-012-0220-7
Aydan O, Kawamoto T (1992) The stability of slopes and underground openings against flexural toppling and their stabilization. Rock Mech Rock Eng 25: 143–165. https://doi.org/10.1007/BF01019709
Brideau MA, Stead D (2010) Controls on block toppling using a three dimensional distinct element approach. Rock Mech Rock Eng 43: 241–260. https://doi.org/10.1007/s00603-009-0052-2
Cai JC, Ju NP, Huang RQ, et al. (2019) Mechanism of toppling and deformation in hard rock slope: a case of bank slope of Hydropower Station, Qinghai Province, China. J Mt Sci 16: 924–934. https://doi.org/10.1007/s11629-018-5096-x
Cai JC, Zheng D, Ju NP, et al. (2022) Time-varying effect of ductile flexural toppling failure on antidip layered rock Slope. Front Earth Sci 10:943700. https://doi.org/10.3389/feart.2022.943700
Cai JS, Yan EC, Wang ZQ, et al. (2014) Study of cantilever beam limit equilibrium model of anti-dip layered rock slopes. Rock Soil Mech 35(S1): 15–28. https://doi.org/10.16285/j.rsm.2014.s1.003
Chen HQ, Huang RQ (2004) Stress and flexibility criteria of bending and breaking in a countertendency layered slope. Chin J Eng Geol 12: 243–246, 273. (In Chinese) https://doi.org/10.3969/j.issn.1004-9665.2004.03.004
Cruden DM, Hu XQ (1994) Topples on underdip slopes in the Highwood Pass, Alberta, Canada. Q J Eng Geol Hydroge 27: 57–68. https://doi.org/10.1016/0148-9062(94)91232-7
DeFreitas MH, Watters RJ (1973) Some field examples of toppling failure. Geotechnique 23: 495–514. https://doi.org/10.1680/geot.1973.23.4.495
Goodman RE (2013) Toppling-A fundamental failure mode in discontinuous materials Description and analysis. In: 2013 Congress on Stability and Performance of Slopes and Embankments III, Geo-Congress 2013, San Diego, United States. Geotechnical Special Publication. ASCE pp 2348–2378. https://doi.org/10.1061/9780784412787.227
Goodman RE, Bray JW (1976) Toppling of rock slopes, in Rock Engineering for Foundations & Slopes. ASCE pp 201–234.
Huang RQ (2007) Large-scale Landslides and their sliding mechanisms in China Since the 20th Century. Chin J Rock Mech Eng 26: 433–454. (In Chinese) https://doi.org/10.3321/j.issn:1000-6915.2007.03.001
Huang RQ, Li YS, Yan M (2017) The implication and evaluation of toppling failure in Engineering geology practice. Chin J Eng Geol 25: 1165–1181. (In Chinese) https://doi.org/10.13544/j.cnki.jeg.2017.05.001
Jiang LW, Huang RQ (2006) Bending yielding and tensile cracking critera for failure of rock slope whose dip direction opposite to the dip direction of strata. Chin J Eng Geol 14: 289–294, 429. (In Chinese) https://doi.org/10.3969/j.issn.1004-9665.2006.03.001.
Liu HJ, Zhao JJ, Ju NP (2016) Mechanical analysis of toppling failure of rock slope. Rock Soil Mech 37: 289–294. https://doi.org/10.16285/j.rsm.2016.S1.038
Liu M, Liu FZ, Huang RQ, et al. (2016) Deep-seated large-scale toppling failure in metamorphic rocks: a case study of the Erguxi slope in southwest China. J Mt Sci 13: 2094–2110. https://doi.org/10.1007/s11629-015-3803-4
Ning YB, Zhang GC, Tang HM, et al. (2019) Process analysis of toppling failure on anti dip rock slopes under seismic load in Southwest China. Rock Mech Rock Eng 52: 4439–4455. https://doi.org/10.1007/s00603-019-01855-z
Sun GZ (1988) Structural mechanics of rock mass. Beijing: Science Press. pp 363–365. (In Chinese)
Sun GZ, Zhang WB (1985) A common rock structure-board crack structure and its mechanical model. Chin J Geol 28: 275–282. (In Chinese)
Tamrakar NK, Yokota S, Osaka O (2002) A toppled structure with sliding in the Siwalik Hills, midwestern Nepal. Eng Geol 64: 339–350. https://doi.org/10.1016/S0013-7952(01)00095-3
Tao ZG, Zhu C, He MC, et al. (2021) A physical modeling-based study on the control mechanisms of Negative Poisson’s ratio anchor cable on the stratified toppling deformation of anti-inclined slopes. Int J Rock Mech Min 138: 104632. https://doi.org/10.1016/j.ijrmms.2021.104632
Wyllie DC (1980) Toppling rock slope failures, examples of analysis and stabilization. Rock Mechanics 13: 89–98. https://doi.org/10.1007/BF01238952
Zhang GC, Wang F, Zhang H, et al. (2018) New stability calculation method for rock slopes subject to flexural toppling Failure. Int J Rock Mech Min 106: 319–328. https://doi.org/10.1016/j.ijrmms.2018.04.016
Zhang P, Zhang DF, Yang Y, et al. (2022) A case study on intergrated modeling of spatial information of a complex geological body. Lithosphere 2022(s10): 2918401. https://doi.org/10.2113/2022/2918401
Zheng Y, Chen CX, Liu TT, et al. (2018) Study on the mechanisms of flexural toppling failure in anti-inclined rock slopes using numerical and limit equilibrium models. Eng Geol 237: 116–128. https://doi.org/10.1016/j.enggeo.2018.02.006
Zhu C, He MC, Karakus M, et al. (2020) Investigating toppling failure mechanism of anti-dip layered slope due to excavation by physical modelling. Rock Mech Rock Eng 53(11): 5029–5050. https://doi.org/10.1007/s00603-020-02207-y
Zhu C, Karakus M, He MC, et al. (2022) Volumetric deformation and damage evolution of Tibet interbedded skarn under multistage constant-amplitude-cyclic loading. Int J Rock Mech Min 152: 105066. https://doi.org/10.1016/j.ijrmms.2022.105066
Acknowledgments
We appreciate the linguistic assistance provided by AJE during the preparation of this manuscript. Special thanks go to the expertise comments from the reviewers and editors for improving the manuscript. The study is financially supported by the National Key R&D Program of China (2018YFC1504905), the Funds for Creative Research Groups of China (41521002), the Opening fund of State Key Laboratory of Geohazard Prevention and Geoenvironment Protection (Chengdu University of Technology, SKLGP2022K004) and the National Natural Science Foundation of China (41907250, 41772317, 52104082).
Author information
Authors and Affiliations
Corresponding authors
Rights and permissions
About this article
Cite this article
Cai, Jc., Zheng, D., Ju, Np. et al. Boundary effect of toppling failure based on three-dimensional mechanical model. J. Mt. Sci. 19, 3314–3322 (2022). https://doi.org/10.1007/s11629-022-7337-2
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11629-022-7337-2