Abstract
We add new modules for receiver function (RF) analysis in SplitLab toolbox, which includes the manual RF analysis module, automatic RF analysis and related quality control modules, and H-k stacking module. The updated toolbox (named SplitRFLab toolbox), especially its automatic RF analysis module, could calculate the RFs quickly and efficiently, which is very useful in RF analysis with huge amount of seismic data. China is now conducting the ChinArray project that plans to deploy thousands of portable stations across Chinese mainland. Our SplitRFLab toolbox may obtain reliable RF results quickly at the first time, which provide essentially new constraint to the crustal and mantle structures.
Similar content being viewed by others
Avoid common mistakes on your manuscript.
1 Introduction
Seismology is becoming the most popular tool in studying the interior structure of the Earth thanks to the development of digital seismology and the rapidly accumulated seismic data in recent years. Receiver function (RF) analysis, proposed by Langston (1979), is one of routine tools to determine the one-dimensional structure of the crust and mantle. P-wave RF deconvolves the radial component with the vertical component and obtains the Ps phase converted at velocity discontinuities (e.g., Moho) in the Earth. The time delay between the Ps converted phase and direct P-wave is sensitive to the depth of the velocity discontinuities and the average S-wave velocity above it (Zhu and Kanamori 2000). The RF method is stable and efficient in determining the crustal and upper mantle structures (e.g., Dueker and Sheehan 1997; Kind et al. 2002), which makes it one of the most popular methods in seismology.
The routines of RF analysis include the following procedures: (a) selecting the proper events (e.g., epicentral distance, magnitude) from the earthquake catalog and matching them with seismic data in the local directory; (b) preprocessing the waveforms, such as removing average shift of amplitude, removing the linear trend, and filtering the waveforms with certain bandpass filters; (c) picking P-wave arrivals; and (d) calculating P-wave RFs by deconvolving the radial component with the vertical component. Zhu and Kanamori (2000) further proposed the H-k stacking method with a grid-search algorithm that determines the v P/v S ratio and Moho depth (H) with the obtained P-wave RFs at a station, which is very important in determining one-dimensional structure in the Earth.
Many open-source codes have been released for RF analysis in recent years, such as the CPS 330 system, the RF module under Python, and the process RFmatlab module under MATLAB. These codes generally import the preprocessed seismic data to calculate RFs from teleseismic radial and vertical components. However, users have to write many small codes to obtain the preprocessed data first, e.g., selecting teleseismic events, removing average and linear trend from the waveforms, filtering, and selecting phases in proper time windows. Thanks to the rapid development of computer science, more GUI-based seismological softwares bring much convenience and power efficiency in seismic data analysis, such as the AIMBAT for picking arrival times (Lou et al. 2013), the FuncLab toolbox for RF analysis (Eagar and Fouch 2012), and SplitLab toolbox for shear-wave splitting analysis (Wüstefeld et al. 2008).
SplitLab toolbox (Wüstefeld et al. 2008) developed under MATLAB environment by French scientist is an open-source GUI toolbox for shear-wave splitting analysis. It first links SAC data in the local directory to the earthquake catalog automatically, and then cuts the waveform in proper time windows by calculating the theoretical arrival times with Taup Toolkit (Crotwell et al. 1999). Users may preprocess the waveforms (e.g., removing average and linear trends, filtering with certain filters) quickly with defined keyboard shortcuts, which are then used for shear-wave splitting analysis and other related purposes. The GUI module of the toolbox provides very convenient and fast way to estimate the results interactively and efficiently, which makes it one of the most popular tools in shear-wave splitting analysis. FuncLab (Eagar and Fouch 2012) is a similar GUI-based toolbox for RF analysis. However, it lacks some nice functions such as automatically matching the local data with the earthquake catalog and interactively checking the results. Therefore, in this study, we integrate the RF analysis modules in the SplitLab toolbox, which inherits many nice functions for quick data preprocessing and convenient estimation of the final results. We also add the H-k stacking module (Zhu and Kanamori 2000) that obtains the crustal thickness and the average v P/v S in the crust under a station.
2 SplitRFLab toolbox
SplitRFLab, as an improved version of SplitLab toolbox, is a GUI-based software for RF and some other seismic data analysis under MATLAB environment. The toolbox can automatically import local SAC data, calculate their RFs, and selects high-quality results with convenient keyboard shortcuts. Besides, it includes modules to plot the results and conduct H-k stacking directly.
2.1 Data import module
SplitLab (Wüstefeld et al. 2008) provides very nice GUI modules for uses to link local SAC data to the proper event lists (constrained with dates, magnitudes, epicentral distances, azimuths, focal depths, etc.). It then calculates the theoretical arrivals of different phases with Taup Toolkit, and cut the waveforms in the corresponding time windows for further shear-wave splitting or RF analysis.
SplitLab also provides windows to view the seismograms conveniently. Users can select the waveforms in certain time windows by direct clicking and dragging with mouse in the window, which are prepared for subsequent processing such as time-frequency analysis and plotting particle motions. Because these excellent modules are also necessary in RF analysis, we keep them in our new SplitRFLab toolbox and add new functions and modules accordingly.
2.2 Parameter setting module
SplitRFLab adds many new modules to original SplitLab toolbox for RF analysis (Fig. 1). These modules include RF parameter setting module, manual RF calculation module, automatic RF calculation and related quality control modules, and H-k stacking module. In the parameter setting module (Fig. 2), users should set the output directory of the results as well as many necessary parameters used in RF analysis [e.g., length of waveforms, Gauss parameter, cut-off value of signal-to-noise ratio (SNR)]. Once these parameters are set, users many calculate the RFs and plot the results by simple clicks.
2.3 Manual RF analysis module
SplitRFLab toolbox adds functions of RF analysis in the original seismogram-viewer window (Fig. 3a). Similar to the shear-wave splitting analysis, users select the waveforms in the time windows containing P-wave which are converted to the radial, transverse, and vertical components automatically. Then users apply either iterative (Ligorría and Ammon 1999) or water-level (Ammon 1991) deconvolution algorithms by simple clicks or keyboard shortcuts to obtain the corresponding RFs. The codes for RF analysis are modified from process RFmatlab toolbox (https://github.com/iwbailey/processRFmatlab). Figure 3b shows examples of radial and transverse RFs obtained by the manual RF analysis module; users may choose to save the results to the defined directory.
There are many functions in the seismogram-viewer window of SplitRFLab (Fig. 3), including zooming the waveforms, filtering, time-frequency analysis, coordinate transformation, etc. Users may call these functions by both mouse click and defined keyboard shortcuts (Wüstefeld et al. 2008). Here, we add new shortcuts for the RF calculation in the seismogram-viewer window; when the waveforms are selected, pressing keyboard “R” button will call functions to calculate the RFs.
2.4 Automatic RF analysis and quality control module
Compared with the manual RF analysis that obtains an RF with some clicks in the seismogram-viewer window, it is more efficient to calculate the RF automatically. Because the RF analysis is not sensitive to the accurate P-wave arrivals, we may first calculate the theoretical arrivals with Taup Toolkit (Crotwell et al. 1999) and then select the waveforms in an expanded time window that include the P-wave phase. The RFs are therefore calculated automatically with the selected preprocessed waveforms. Since the noise contained in different waveforms has different frequency bands, we calculate the RFs of waveforms with 3rd order Butterworth filter in three different frequency bands and then select one optimal result among them. These bands are sufficient for most studies in P-wave receiver function analysis. However, users may change the desired frequency bands in “calRFbat.m” according to the quality of their data. We also calculate the SNR value of P-wave by comparing the energy of waveforms (10 s long) after and before the theoretical arrivals. We first set cut-off values of SNR for the radial and vertical components in the parameter setting module. Only the waveforms with SNR values larger than the cut-off values are processed further to calculate the RFs, which enhances the efficiency significantly.
SplitRFLab adds a new window to plot the obtained RFs (Fig. 4), which are used to check and select the optimal result from the results of three different frequency bands. We defined keyboard shortcuts (Table 1) for users to select the optimal results quickly. For example, pressing keyboard “q” button in the window will save the result of the waveforms filtered in the frequency bands of 0.03–2.0 Hz. Users may also press keyboard “s” button to import and view the original waveforms quickly, which provides important constraints on the reliability of the obtained RFs. More keyboard shortcuts can be defined in the file “rfKeyPress.m” when necessary.
2.5 H-k stacking module
After calculating and saving the RFs of all events at a station, users may plot the RF section and save it in local directory by simple clicking at defined buttons. The SplitRFLab also provides window for H-k stacking; users set proper parameters and then press the button to calculate the v P/v S value and Moho depth (H) with a grid-search algorithm (Zhu and Kanamori 2000). We estimate the uncertainties of (v P/v S, H) pair following Eaton et al. (2006) and plot an ellipse in the figure to show them visually. All the results, including the figures and (v P/v S, H) values, are finally saved in the predefined directory.
3 Quick guide to SplitRFLab
The complete modules and functions of SplitRFLab toolbox are shown in Fig. 1, in which the red squares and red words in blue squares are newly added for RF analysis. Here, we provide an example of calculating the RFs and obtaining the crustal structure under a permanent station NJ2 (Fig. 5) with SplitRFLab toolbox.
We first link the local SAC data to the earthquake catalog under the instruction of SplitLab (Wüstefeld et al. 2008). Then in the panel “Process” we set the path to the directories where the cut waveforms, calculated RFs, and RF section are saved (Fig. 2). Clicking the button “RF parameters” will call a pop-up window where we set the values of Gauss parameter, method, and cut-off values of SNR that are necessary in RF calculation. Now click the button “Do PRFs”, and the SplitRFLab toolbox will calculate the RFs of all events at the station NJ2. A pop-up bar appears and shows the process of the calculation. Those waveforms with SNR values smaller than the predefined cut-off values are generally ignored in the step, which accelerates the calculation. After the automatic RF analysis, we click the button “View RF” in panel “View Database”, check every RF, and save good results with keyboard shortcuts (Table 1). At last, we click the button “Plot RT” and a figure showing the RF section plotted with a function of back azimuth will appear (Fig. 6).
The H-k stacking module makes it possible to obtain the (v P/v S, H) values quickly. We first set ranges of the parameters (e.g., v P/v S, H) in the grid-search algorithm as well as average P-wave velocity in the crust, weights of different phases in the stacking, and the path to the directory for the saved plots and results. Then click button “Go stacking”, the SplitRFLab will call the H-k stacking module to obtain the energy map of different phases (i.e., Ps, PpPs, PsPs, & PpSs) (Fig. 7a–c) and their weight summary (Fig. 7d). The optimal (v P/v S, H) pair is also calculated automatically. We may choose to save the plot and result or not. Moreover, clicking the button “Plot R” will plot the radial RFs as a function of ray parameter (Fig. 7e). The theoretical arrivals of different phases with the optimal (v P/v S, H) model will be marked in the RF section (Fig. 7e).
4 Summary
We developed the SplitRFLab code, which is a MATLAB toolbox with friendly GUI, and added new RF analysis modules in the original SplitLab for shear-wave splitting analysis. The SplitRFLab toolbox includes necessary routines in individual RF calculation and H-k stacking procedure. Especially, the automatic RF analysis modules enable users to calculate RFs of all events at stations after setting necessary parameters. The modules largely enhance the efficiency of RF analysis in seismological studies based on dense array, such as the ChinArray project currently undertaken in Chinese mainland. With benefit of the SplitRFLab toolbox, we can obtain reliable RFs and crustal structures immediately flowing the huge-array observation.
As developed under the GNU general public license, users many download the SplitRFLab toolbox and find the related documents at https://github.com/xumi1993/SplitRFLab. Moreover, users are also allowed to improve the toolbox by adding new functions and modules and release new versions under the GNU general public license.
References
Ammon CJ (1991) The isolation of receiver effects from teleseismic P waveforms. Bull Seismol Soc Am 81(6):2504–2510
Crotwell HP, Owens TJ, Ritsema J (1999) The TauP Toolkit: flexible seismic travel-time and ray-path utilities. Seismol Res Lett 70(2):154–160
Dueker KG, Sheehan AF (1997) Mantle discontinuity structure from midpoint stacks of converted P to S waves across the Yellowstone hotspot track. J Geophys Res 102:8313–8327
Eagar KC, Fouch MJ (2012) FuncLab: a MATLAB interactive toolbox for handling RF datasets. Seismol Res Lett 83(3):596–603
Eaton DW, Dineva S, Mereu R (2006) Crustal thickness and v P/v S variations in the Grenville orogen (Ontario, Canada) from analysis of teleseismic RFs. Tectonophysics 420(1):223–238
Kind R, Yuan X, Saul J, Nelson N, Sobolev SV, Mechie J, Zhao W, Kosarev G, Ni J, Achauer U, Jiang M (2002) Seismic images of crust and upper mantle beneath Tibet: evidence for Eurasian plate subduction. Science 298(5596):1219–1221
Langston CA (1979) Structure under Mount Rainier, Washington, inferred from teleseismic body waves. J Geophys Res 84:4749–4762
Ligorría JP, Ammon CJ (1999) Iterative deconvolution and receiver-function estimation. Bull Seismol Soc Am 89(5):1395–1400
Lou X, van der Lee S, Lloyd S (2013) AIMBAT: a python/matplotlib tool for measuring teleseismic arrival times. Seismol Res Lett 84(1):85–93
Wüstefeld A, Bokelmann G, Zaroli C, Barruol G (2008) SplitLab: a shear-wave splitting environment in Matlab. Comput Geosci 34(5):515–528
Zhu L, Kanamori H (2000) Moho depth variation in southern California from teleseismic RFs. J Geophys Res 105(B2):2969–2980
Acknowledgments
The data used in this study were obtained from Incorporated Research Institutions for Seismology Data Management Center (http://iris.edu). We are grateful to the editor for inviting and encouraging us to complete the manuscript. Comments from two anonymous reviewers improved the manuscript. This work is supported by China National Special Fund for Earthquake Scientific Research in Public Interest (201008001, 201308011).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
This article is published under an open access license. Please check the 'Copyright Information' section either on this page or in the PDF for details of this license and what re-use is permitted. If your intended use exceeds what is permitted by the license or if you are unable to locate the licence and re-use information, please contact the Rights and Permissions team.
About this article
Cite this article
Xu, M., Huang, H., Huang, Z. et al. SplitRFLab: A MATLAB GUI toolbox for receiver function analysis based on SplitLab. Earthq Sci 29, 17–26 (2016). https://doi.org/10.1007/s11589-016-0141-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11589-016-0141-8