Abstract
In recent few years, significant improvement has been made in developing largescale 3D printer to accommodate the need of industrial-scale 3D printing. Cementitious materials that are compatible with 3D printing promote rapid application of this innovative technique in the construction field with advantages of cost effective, high efficiency, design flexibility and environmental friendly. This paper firstly reviews existing 3D printing techniques that are currently being used in commercial 3D printers. It then summarizes three latest development of largescale 3D printing systems and identifies their relationships and limiting factors. Thereafter, critical factors that are used to evaluate the workability and printable performance of cementitious materials are specified. Easy-extrusive, easy-flowing, well-buildable, and proper setting time are significant for cementitious material to meet the critical requirements of a freeform construction process. Finally, main advantages, potential applications and the prospects of future research of 3D printing in construction technology are suggested. The objective of this work is to review current design methodologies and operational constraints of largescale 3D printing system and provide references for optimizing the performance of cementitious material and promote its responsible use with largescale 3D printing technology.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
American Society for Material and Testing (ASTM). Standard Terminology for Additive Manufacturing Technologies. vol. F2792-12a. ASTM International, West Consholhocken, United States. 2009, http://www.astm.org/DATABASE.CART/HISTORICAL/F2792-10.htm
Singh M, Haverinen H M, Dhagat P, et al. Inkjet printing-process and its applications Adv Mater, 2010, 22: 673–685
Labonnote N, Rønnquist A, Manum B, et al. Additive construction: State-of-the-art, challenges and opportunities Automat Constr, 2016, 72: 347–366
Berman B. 3-D printing: The new industrial revolution. Bus Horiz, 2012, 55: 155–162
Gao W, Zhang Y, Ramanujan D, et al. The status, challenges, and future of additive manufacturing in engineering Comput Aided Des, 2015, 69: 65–89
Zhang D, Chi B, Li B, et al. Fabrication of highly conductive graphene flexible circuits by 3D printing Synth Met, 2016, 217: 79–86
Jiang Q, Feng X, Gong Y, et al. Reverse modelling of natural rock joints using 3D scanning and 3D printing Comput Geotech, 2016, 73: 210–220
Sun J, Peng Z, Yan L, et al. 3D food printing—An innovative way of mass customization in food fabrication. Int J Bioprint, 2015, 1: 27–38
Hull C W. Apparatus for production of three-dimensional objects by stereolithography. US Patent 5556590, 1986
Utela B, Storti D, Anderson R, et al. A review of process development steps for new material systems in three dimensional printing (3DP). J Manuf Process, 2008, 10: 96–104
Henke K, Treml S. Wood based bulk material in 3D printing processes for applications in construction Eur J Wood Prod, 2013, 71: 139–141
Goyanes A, Buanz A B M, Basit A W, et al. Fused-filament 3D printing (3DP) for fabrication of tablets. Int J Pharm, 2014, 476: 88–92
Ju Y, Wang L, Xie H, et al. Visualization and transparentization of the structure and stress field of aggregated geomaterials through 3D printing and photoelastic techniques Rock Mech Rock Eng, 2017, 50: 1383–1407
Hsu C Y, Chen D Y, Lai M Y, et al. EDM electrode manufacturing using RP combining electroless plating with electroforming. Int J Adv Manuf Technol, 2008, 38: 915–924
Griffini G, Invernizzi M, Levi M, et al. 3D-printable CFR polymer composites with dual-cure sequential IPNs. Polymer, 2016, 91: 174–179
Invernizzi M, Natale G, Levi M, et al. UV-assisted 3D printing of glass and carbon fiber-reinforced dual-cure polymer composites. Materials, 2016, 9: 583–595
Melchels F P W, Feijen J, Grijpma D W. A review on stereolithography and its applications in biomedical engineering. Biomaterials, 2010, 31: 6121–6130
Chia H N, Wu B M. Recent advances in 3D printing of biomaterials J Biological Eng, 2015, 9: 1–14
Pegna J. Exploratory investigation of solid freeform construction Automat Constr, 1997, 5: 427–437
Khoshnevis B, Dutton R. Innovative rapid prototyping process makes large sized, smooth surfaced complex shapes in a wide variety of materials Mater Technol, 1998, 13: 53–56
Dini E. D-shape printers. 2007, http://d-shape.com/d-shape-printers
Designboom. Stone spray robot produces architecture from soil. 2012, http://www.designboom.com/design/stone-spray-robot-produces-architecture-from-soil
Platte B. Branch technology is 3D printing the future of construction one wall at a time. 2015, https://www.3dprintingindustry.com/news/branch-technology-is-3d-printing-the-future-of-construction-one-wall-at-a-time-54149
Feng L, Liang Y. Study on the status quo and problems of 3D printed buildings in China Glob J Hum Soc Sci Res, 2014, 14: 7–10
WASP. The first adobe building. 2016, http://www.xinkebot.com/en/nd.jsp?_np=103_420&id=220
Gibbons G J, Williams R, Purnell P, et al. 3D Printing of cement composites. Adv Appl Ceram, 2010, 109: 287–290
Maier A K, Dezmirean L, Will J, et al. Three-dimensional printing of flash-setting calcium aluminate cement. J Mater Sci, 2011, 46: 2947–2954
Xia M, Sanjayan J. Method of formulating geopolymer for 3D printing for construction applications Mater Des, 2016, 110: 382–390
Khoshnevis B, Bukkapatnam S, Kwon H, et al. Experimental investigation of contour crafting using ceramics materials Rapid Prototyp J, 2001, 7: 32–42
Ju Y, Jia Y D, Liu H B, et al. Mesomechanism of steel fiber reinforcement and toughening of reactive powder concrete Sci China Ser E-Technol Sci, 2007, 50: 815–832
Ju Y, Wang L, Liu H, et al. An experimental investigation of the thermal spalling of polypropylene-fibered reactive powder concrete exposed to elevated temperatures Sci Bull, 2015, 60: 2022–2040
Al-Hadithi A I, Hilal N N. The possibility of enhancing some properties of self-compacting concrete by adding waste plastic fibers J Build Eng, 2016, 8: 20–28
Salvador R P, Cavalaro S H P, Cincotto M A, et al. Parameters controlling early age hydration of cement pastes containing accelerators for sprayed concrete Cement Concrete Res, 2016, 89: 230–248
Rouhana C M, Aoun M S, Faek F S, et al. The reduction of construction duration by implementing contourontour crafting (3D printing). In: Proceedings for the 22nd Annual Conference of the International Group for Lean Construction. Volume 22. Oslo, Norway, 2014
Khoshnevis B, Hwang D, Yao K T, et al. Mega-scale fabrication by Contour Crafting. Int J Indus Sys Eng, 2006, 1: 301–320
Hopkinson N, Dickens P M. Analysis of rapid manufacturing—Using layer manufacturing processes for production P I Mech Eng C-J Mec, 2003, 217: 31–39
Malaeb Z, Hachem H, Tourbah A, et al. 3D concrete printing: Machine and mix design. Int J Civil Eng, 2015, 6: 14–22
Wu P, Wang J, Wang X. A critical review of the use of 3-D printing in the construction industry. Automat Constr, 2016, 68: 21–31
Perkins I, Skitmore M. Three-dimensional printing in the construction industry: A review. Int J Constr Manage, 2015, 15: 1–9
Rengier F, Mehndiratta A, von Tengg-Kobligk H, et al. 3D printing based on imaging data: Review of medical applications. Int J Comput Assist Radiol Surg, 2010, 5: 335–341
Kaye R, Goldstein T, Zeltsman D, et al. Three dimensional printing: A review on the utility within medicine and otolaryngology Int J Pediatr Otorhi, 2016, 89: 145–148
3D printing. https://en.wikipedia.org/wiki/3D_printing
Kumar S, Kruth J P. Composites by rapid prototyping technology Mater Des, 2010, 31: 850–856
Ma X L. Research on application of SLA technology in the 3D printing technology Appl Mech Mater Des, 2013, 401-403: 938–941
Kotlinski J. Mechanical properties of commercial rapid prototyping materials Rapid Prototyp J, 2014, 20: 499–510
Günther D, Heymel B, Franz Günther J, et al. Continuous 3D-printing for additive manufacturing Rapid Prototyp J, 2014, 20: 320–327
Choudhari C M, Patil V D. Product development and its comparative analysis by SLA, SLS and FDM rapid prototyping processes. In: IOP Conference Series: Materials Science and Engineering, Volume 149. Bangalore, India, 2016. 012009
Mierzejewska A, Markowicz W. Selective laser sintering-binding mechanism and assistance in medical applications Adv Mater Sci, 2015, 15: 20–31
Saprykin A A, Babakova E V, Ibragimov E A, et al. Prospects of creating products using selective laser sintering Appl Mech Mater, 2015, 770: 608–611
Akande S O, Dalgarno K W, Munguia J, et al. Assessment of tests for use in process and quality control systems for selective laser sintering of polyamide powders J Mater Process Technol, 2016, 229: 549–561
Erdal M, Dag S, Jande Y, et al. Manufacturing of functionally graded porous products by selective laser sintering Mater Sci Forum, 2009, 631-632: 253–258
3D system. Introduction of the metal 3D printer. https://uk.3dsystems.com/3d-printers/prox-dmp-200
Salmoria G V, Lafratta F H, Biava M M, et al. Rapid manufacturing and rapid tooling of polymer miniaturized parts using Stereolithography J Braz Soc Mech Sci Eng, 2008, 30: 7–10
Lifton V A, Lifton G, Simon S. Options for additive rapid prototyping methods (3D printing) in MEMS technology Rapid Prototyp J, 2014, 20: 403–412
Ju Y, Xie H, Zheng Z, et al. Visualization of the complex structure and stress field inside rock by means of 3D printing technology Chin Sci Bull, 2014, 59: 5354–5365
Casavola C, Cazzato A, Moramarco V, et al. Orthotropic mechanical properties of fused deposition modelling parts described by classical laminate theory Mater Des, 2016, 90: 453–458
Yan X, Gu P. A review of rapid prototyping technologies and systems. Comp-Aided Des, 1996, 28: 307–318
Hashemi Sanatgar R, Campagne C, Nierstrasz V. Investigation of the adhesion properties of direct 3D printing of polymers and nanocomposites on textiles: Effect of FDM printing process parameters Appl Surf Sci, 2017, 403: 551–563
Ju Y, Wang L, Xie H, et al. Visualization of the three-dimensional structure and stress field of aggregated concrete materials through 3D printing and frozen-stress techniques Constr Build Mater, 2017, 143: 121–137
Lim S, Buswell R A, Le T T, et al. Developments in constructionscale additive manufacturing processes Autom Constr, 2012, 21: 262–268
Cesaretti G, Dini E, De Kestelier X, et al. Building components for an outpost on the Lunar soil by means of a novel 3D printing technology Acta Astronautica, 2014, 93: 430–450
Krassenstein E. D-Shape looks to 3D print bridges, a military bunker, and concrete/metal mixture. 2014, https://www.3dprint.com/27229/d-shape-3d-printed-military
Krassenstein E. D-Shape intern unveils plans to 3D print unique buildings in Australia & beyond. 2015, https://www.3dprint.com/64469/3d-printed-buildings-australia/
Colla V, Dini E. Large scale 3D printing: From deep sea to the moon. In: Canessa E, Fonda C, Zennaro M, Eds. Low-Cost 3D Printing for Science, Education and Sustainable Development. Trieste, Italy: ICTP—The Abdus Salam Centre for Theoretical Physics, 2013. 127–132
Taylor D. “Endless” house to be built using giant 3D printer. 2013, http://newatlas.com/giant-3d-printer-endless-house/25913
Khoshnevis B. Automated construction by contour crafting—Related robotics and information technologies Automat Constr, 2004, 13: 5–19
Hwang D. Contour crafting: The emerging construction technology. In: IIE Annual Conference and Exposition. Atlanta, GA, 2005
Zhang J, Khoshnevis B. Optimal machine operation planning for construction by Contour Crafting Automat Constr, 2013, 29: 50–67
Bosscher P, Williams Ii R L, Bryson L S, et al. Cable-suspended robotic contour crafting system. Automat Constr, 2007, 17: 45–55
Rudenko A. 3D concrete house printer. 2015, http://www.designboom.com/technology/3d-printed-concrete-castle-minnesota-andrey- rudenko-08-28-2014
Winsun. WinSun China builds world’s first 3D printed villa and tallest 3D printed apartment building. 2015, http://www.3ders.org/articles/20150118-winsun-builds-world-first-3d-printed-villa-andtallest-3d-printed-building-in-china.html
Lim S, Buswell R, Le T, et al. Development of a viable concrete printing process. In: Proceedings of the 28th International Symposium on Automation and Robotics in Construction, (ISARC2011). Seoul, South Korea, 2011. 665–670
Lim S, Le T, Webster J, et al. Fabricating construction components using layered manufacturing technology. In: Global Innovation in Construction Conference. Leicestershire, UK: Loughborough University, 2009. 512–520
Clare Scott. 3D printed, livable tiny house built in only 24 hours by the Vesta V2 concrete printer. 2016, https://3dprint.com/139022/vesta-3d-printed-tiny-house
Bridget B M. Eindhoven University of Technology (TU/e) unveils massive robotic concrete 3D printer, displays new pavilion. 2016, https://3dprint.com/139988/tue-concrete-3d-printer-pavilion
Lim S, Buswell R A, Valentine P J, et al. Modelling curved-layered printing paths for fabricating large-scale construction components Addit Manuf, 2016, 12: 216–230
Gosselin C, Duballet R, Roux P, et al. Large-scale 3D printing of ultra-high performance concrete—A new processing route for architects and builders. Mater Des, 2016, 100: 102–109
Buswell R A, Thorpe A, Soar R C, et al. Design, data and process issues for mega-scale rapid manufacturing machines used for construction. Automat Constr, 2008, 17: 923–929
Silva Y F, Robayo R A, Mattey P E, et al. Properties of self-compacting concrete on fresh and hardened with residue of masonry and recycled concrete Constr Build Mater, 2016, 124: 639–644
Mastali M, Dalvand A. Use of silica fume and recycled steel fibers in self-compacting concrete (SCC) Constr Build Mater, 2016, 125: 196–209
Le T T, Austin S A, Lim S, et al. Mix design and fresh properties for high-performance printing concrete Mater Struct, 2012, 45: 1221–1232
Perrot A, Rangeard D, Pierre A. Structural built-up of cement-based materials used for 3D-printing extrusion techniques Mater Struct, 2016, 49: 1213–1220
Singh S B, Munjal P, Thammishetti N. Role of water/cement ratio on strength development of cement mortar J Build Eng, 2015, 4: 94–100
Kong H J, Bike S G, Li V C. Development of a self-consolidating engineered cementitious composite employing electrosteric dispersion/stabilization Cem Conc Comp, 2003, 25: 301–309
Mardani-Aghabaglou A, Tuyan M, Yilmaz G, et al. Effect of different types of superplasticizer on fresh, rheological and strength properties of self-consolidating concrete Constr Build Mater, 2013, 47: 1020–1025
Lorimer P, Omari M A, Claisse P A. Workability of cement pastes ACI Mater J, 2001, 98: 476–482
Lee S H, Kim H J, Sakai E, et al. Effect of particle size distribution of fly ash-cement system on the fluidity of cement pastes Cement Concrete Res, 2003, 33: 763–768
Burgos-Montes O, Palacios M, Rivilla P, et al. Compatibility between superplasticizer admixtures and cements with mineral additions Constr Build Mater, 2012, 31: 300–309
Kwan A K H, Wong H H C. Effects of packing density, excess water and solid surface area on flowability of cement paste Adv Cement Res, 2008, 20: 1–11
Park C K, Noh M H, Park T H. Rheological properties of cementitious materials containing mineral admixtures Cement Concrete Res, 2005, 35: 842–849
Ferraris C F, Obla K H, Hill R. The influence of mineral admixtures on the rheology of cement paste and concrete Cement Concrete Res, 2001, 31: 245–255
Lachemi M, Hossain K M A, Lambros V, et al. Performance of new viscosity modifying admixtures in enhancing the rheological properties of cement paste Cement Concrete Res, 2004, 34: 185–193
Sonebi M, Lachemi M, Hossain K M A. Optimisation of rheological parameters and mechanical properties of superplasticised cement grouts containing metakaolin and viscosity modifying admixture Constr Build Mater, 2013, 38: 126–138
Lin X Q, Zhang T, He L. Preparation, properties and application of cement-based building 3D printing materials. Concr Australia, 2016, 42: 59–67
Paglia C, Wombacher F, Böhni H. The influence of alkali-free and alkaline shotcrete accelerators within cement systems Cement Concrete Res, 2001, 31: 913–918
Maltese C, Pistolesi C, Bravo A, et al. A case history: Effect of moisture on the setting behaviour of a Portland cement reacting with an alkali-free accelerator. Cement Concrete Res, 2007, 37: 856–865
Feng P, Meng X, Chen J F, et al. Mechanical properties of structures 3D printed with cementitious powders Constr Build Mater, 2015, 93: 486–497
Nerella V N N M. CONPrint3D-3D printing technology for onsite construction. Concr Australia, 2016, 42: 36–39
Shao Y, Qiu J, Shah S P. Microstructure of extruded cement-bonded fiberboard Cement Concrete Res, 2001, 31: 1153–1161
Christ S, Schnabel M, Vorndran E, et al. Fiber reinforcement during 3D printing Mater Lett, 2015, 139: 165–168
Nerella V N, Krause M, Näther M, et al. Studying printability of fresh concrete for formwork free Concrete on-site 3D Printing technology (CONPrint3D). In: Conference on Rheology of Building Materials. Regensburg, Germany, 2016
Lee S J, Won J P. Shrinkage characteristics of structural nano-synthetic fibre-reinforced cementitious composites Composite Struct, 2016, 157: 236–243
Bissonnette B, Attiogbe E K, Miltenberger M A, et al. Drying shrinkage, curling, and joint opening of slabs-on-ground ACI Mater J, 2007, 104: 259–267
Zhang J, Gong C, Guo Z, et al. Engineered cementitious composite with characteristic of low drying shrinkage Cement Concrete Res, 2009, 39: 303–312
Rongbing B, Jian S. Synthesis and evaluation of shrinkage-reducing admixture for cementitious materials Cement Concrete Res, 2005, 35: 445–448
Xu J, Ding L, Love P E D. Digital reproduction of historical building ornamental components: From 3D scanning to 3D printing Automat Constr, 2017, 76: 85–96
Jeon K H, Park M B, Kang M K, et al. Development of an automated freeform construction system and its construction materials. In: Proceedings of the 30th International Symposium on Automation and Robotics in Construction and Mining (ISARC 2013). Montreal, Canada: Canadian Institute of Mining, Metallurgy and Petroleum, 2013. 1359–1365
Flexible production of building elements Accessed. 2008, http://blog.fabric.ch/index.php?/archives/212-ROB-Flexible-Production-of-Building-Elements.html
Buswell R A, Soar R C, Gibb A G F, et al. Freeform construction: Mega-scale rapid manufacturing for construction Automat Constr, 2007, 16: 224–231
Lu W, Yuan H. Exploring critical success factors for waste management in construction projects of China Resour Conserv Recycl, 2010, 55: 201–208
Australia S W. Model work health and safety regualtions. 2016, https://www.safeworkaustralia.gov.au/doc/model-work-health-andsafety-regulations
Kreiger M, Pearce J M. Environmental life cycle analysis of distributed three-dimensional printing and conventional manufacturing of polymer products ACS Sustain Chem Eng, 2013, 1: 1511–1519
Deep research and investment strategy analysis consulting report of 3D printing industry in China from 2015 to 2020 (in Chinese). 2015, http://www.chyxx.com/research/201701/483678.html
Belezina J. D-shape 3D printer can print full-sized houses. 2012, http://www.newatlas.com/d-shape-3d-printer/21594
Bak D. Rapid prototyping or rapid production? 3D printing processes move industry towards the latter Assem Autom, 2003, 23: 340–345
Yossef M, Chen A. Applicability and limitations of 3D printing for civil structures. In: Proceedings of the 2015 Conference on Autonomous and Robotic Construction of Infrastructure. Ames, USA, 2015. 237–246
Camile H L, Kalven L E, Lloyd R. Redmond Lloyd Construction 3D printing. Concr Australia, 2016, 42: 30–35
Robert H. Think formwork-reduced cost. Struct Mag, 2007: 12–14
Wolfs R J M. 3D printing of concrete structures. Dissertation of Masteral Degree. Eindhoven, Netherlands: Eindhoven University of Technology, 2015
Shou W, Wang J, Wang X, et al. A comparative review of building information modelling implementation in building and infrastructure industries. Arch Comput Meth Eng, 2015, 22: 291–308
Chang Y F, Shih S G. BIM-based computer-aided architectural design. Comp-Aided Des Appl, 2013, 10: 97–109
Arayici Y, Coates P, Koskela L, et al. BIM adoption and implementation for architectural practices. Struct Survey, 2011, 29: 7–25
Arayici Y, Egbu C O, Coates P. Building information modelling (BIM) implementation and remote construction projects: issues, challenges, and critiques J Inf Technol Constr, 2012, 17: 75–92
Contour Crafting. Technologies for building immediate infrastructure on the moon and mars for future colonization. http://contourcrafting.com/space-applications
Schrunk D, Sharpe B, Cooper B, et al. The moon: Resources, future development and colonization. Wiley-Praxis Series on Space Science and Technology, 1999
Kading B, Straub J. Utilizing in-situ resources and 3D printing structures for a manned Mars mission Acta Astronaut, 2015, 107: 317–326
Gibson I, Kvan T, Wai Ming L. Rapid prototyping for architectural models Rapid Prototyp J, 2002, 8: 91–95
Campbell T, Williams C, Ivanova O. Could 3D printing change the world? Technologies, Potential, and Implications of Additive Manufacturing. Strategic Foresight Report. Washington, DC: Atlantic Council, 2011
Mcgee W, Leon M P D. Experiments in additive clay depositions. Rob Fabric Archit, Art Des, 2014: 261–272
Leach N, Carlson A, Khoshnevis B, et al. Robotic construction by contour crafting: The case of Lunar construction Int J Archi Comput, 2012, 10: 423–438
Jacobsen S, Haugan L, Hammer T A, et al. Flow conditions of fresh mortar and concrete in different pipes Cement Concrete Res, 2009, 39: 997–1006
Austin S A, Goodier C I, Robins P J. Low-volume wet-process sprayed concrete: Pumping and spraying. Mat Struct, 2005, 38: 229–237
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Ma, G., Wang, L. & Ju, Y. State-of-the-art of 3D printing technology of cementitious material—An emerging technique for construction. Sci. China Technol. Sci. 61, 475–495 (2018). https://doi.org/10.1007/s11431-016-9077-7
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11431-016-9077-7