Abstract
Based on constructal theory, the constructs of the leaf-like fins are optimized by taking minimum entransy dissipation rate (for the fixed total thermal current, i.e., the equivalent thermal resistance) as optimization objective. The optimal constructs of the leaf-like fins with minimum dimensionless equivalent thermal resistance are obtained. The results show that there exists an optimal elemental leaf-like fin number, which leads to an optimal global heat conduction performance of the first order leaf-like fin. The Biot number has little effects on the optimal elemental fin number, optimal ratios of length and width of the elemental and first order leaf-like fins; with the increase of the thermal conductivity ratio of the vein and blade, the optimal elemental fin number and optimal ratio of the length and width of the elemental leaf-like fin increase, and the optimal shape of the first order leaf-like fin becomes tubbier. The optimal construct based on entransy dissipation rate minimization is obviously different from that based on maximum temperature difference minimization. The dimensionless equivalent thermal resistance based on entransy dissipation rate minimization is reduced by 11.54% compared to that based on maximum temperature difference minimization, and the global heat conduction performance of the leaf-like fin is effectively improved. For the same volumes of the elemental and first order leaf-like fins, the minimum dimensionless equivalent thermal resistance of the first order of the leaf-like fin is reduced by 30.10% compared to that of the elemental leaf-like fin, and the global heat conduction performance of the first order leaf-like fin is obviously better than that of the elemental leaf-like fin. Essentially, this is because the temperature gradient field of the first order leaf-like fin based on entransy dissipation rate minimization is more homogenous than that of the elemental leaf-like fin. The dimensionless equivalent thermal resistance defined based on entransy dissipation rate reflects the average heat transfer performance of the leaf-like fin, and can provide some guidelines for the thermal design of the fins from the viewpoint of heat transfer optimization.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Bejan A. Shape and Structure, from Engineering to Nature. Cambridge: Cambridge University Press, 2000
Bejan A, Lorente S. Thermodynamic optimization of flow geometry in mechanical and civil engineering. J Non-Equilib Thermodyn, 2001, 26(4): 305–354
Bejan A, Lorente S. The Constructal Law (La Loi Constructale). Paris: L’Harmatan, 2005
Bejan A, Marden J H. Unifying constructal theory for scale effects in running, swimming and flying. J Exp Biol, 2006, 209(2): 238–248
Bejan A, Merkx G W. Constructal Theory of Social Dynamics. New York: Springer, 2007
Bejan A, Lorente S. Design with Constructal Theory. New Jersey: Wiley, 2008
Bejan A, Lorente S, Miguel A F, et al. Constructal Human Dynamics, Security & Sustainability. Amsterdam: IOS Press, 2009
Bejan A. Constructal-theory network of conducting paths for cooling a heat generating volume. Trans ASME, J Heat Transfer, 1997, 40(4): 799–816
Siddique M, Khaled A R A, Abdulhafiz N I, et al. Recent advances in heat transfer enhancements: a review report. Int J Chem Eng, doi: 1155/2010/106461
Bejan A, Dan N. Constructal trees of convective fins. Trans ASME J Heat Transfer, 1999, 121(3): 675–682
Almogbel M, Bejan A. Cylindrical of pin fins. Int J Heat Mass Transfer, 2000, 43(23): 4285–4297
Bejan A, Almogbel M. Constructal T-shaped fins. Int J Heat Mass Transfer, 2000, 43(12–15): 2101–2115
Almogbel M. Constructal tree-shaped fins. Int J Therm Sci, 2005, 44(4): 342–348
Lorenzini G, Rocha L A O. Constructal design of Y-shaped assembly of fins. Int J Heat Mass Transfer, 2006, 49(23–24): 4552–4557
Lorenzini G, Moretti S. A CFD application to optimize T-shaped fins: comparisons to the constructal theory’s results. Trans ASME J Electron Packag, 2007, 129(3): 324–327
Lorenzini G, Moretti S. Numerical performance analysis of constructal I and Y finned heat exchanging modules. Trans ASME J Electron Packag, 2009, 131(3): 031012
Lorenzini G, Rocha L A O. Constructal design of T-Y assembly of fins for an optimized heat removal. Int J Heat Mass Transfer, 2009, 52(5–6): 1458–1463
Xie Z, Chen L, Sun F. Constructal optimization of twice level Y-shaped assemblies of fins by taking maximum thermal resistance minimization as objective. Sci China Tech Sci, 2010, 53(10): 2756–2764
Kundu B, Bhanja D. Performance and optimization analysis of a constructal T-shaped fin subject to variable thermal conductivity and convective heat transfer coefficient. Int J Heat Mass Transfer, 2010, 53(1–3): 254–267
Combelles L, Lorente S, Bejan A. Leaflike architecture for cooling a flat body. J Appl Phys, 2009, 106(4): 044906
Khaled A R A. Analysis of heat transfer through Bi-convection fins. Int J Thermal Sci, 2009, 48(1): 122–132
Khaled A R A. Investigation of heat transfer enhancement through permeable fins. J Heat Transfer, 2010, 132(3), 034503
Karvinen R, Karvinen T. Optimum geometry of fixed volume plate fin for maximizing heat transfer. Int J Heat Mass Transfer, 2010, 53(23–24): 5380–5385
Zhang X, Liu D. Optimum geometric arrangement of vertical rectangular fin arrays in natural convection. Energy Convers Mgmt, 2010, 51(12): 2449–2456
Bello-Ochende T, Meyer J P, Bejan A. Constructal multi-scale pin-fins. Int J Heat Mass Transfer, 2010, 53(13–14): 2773–2779
Kundu B, Bhanja D. An analytical prediction for performance and optimum design analysis of porous fins. Int J Refrigeration, 2011, 34(1): 337–352
Sharqawy M H, Zubair S M. Efficiency and optimization of an annular fin with combined heat and mass transfer — An analytical solution. Int J Refrigeration, 2007, 30(5): 751–757
Guo Z, Zhu H, Liang X. Entransy — A physical quantity describing heat transfer ability. Int J Heat Mass Transfer, 2007, 50(13/14): 2545–2556
Li Z, Guo Z. Field Synergy Principle of Heat Convection Optimization. Beijing: Science Press, 2010
Guo Z, Cheng X, Xia Z. Least dissipation principle of heat transport potential capacity and its application in heat conduction optimization. Chin Sci Bull, 2003, 48(4): 406–410
Han G, Zhu H, Cheng X, et al. Transfer similarity among heat conduction, elastic motion and electric conduction (in Chinese). J Eng Thermophys, 2005, 26(6): 1022–1024
Han G, Guo Z. Physical mechanism of heat conduction ability dissipation and its analytical expression (in Chinese). Proc CSEE, 2007, 27(17): 98–102
Zhu H, Chen J, Guo Z. Electricity and thermal analogous experimental study for entransy dissipation extreme principle (in Chinese). Prog Natural Sci, 2007, 17(12): 1692–1698
Chen Q, Ren J. Generalized thermal resistance for convective heat transfer and its relation to entransy dissipation. Chin Sci Bull, 2008, 53(23): 3753–3761
Chen Q, Ren J, Guo Z. The extremum principle of mass entransy dissipation and its application to decontamination ventilation designs in space station cabins. Chin Sci Bull, 2009, 54(16): 2862–2870
Xia S, Chen L, Sun F. Optimization for entransy dissipation minimization in heat exchanger. Chin Sci Bull, 2009, 54(19): 3587–3595
Wang S, Chen Q, Zhang B. An equation of entransy and its application. Chin Sci Bull, 2009, 54(19): 3572–3578
Guo J, Cheng L, Xu M. Entransy dissipation number and its application to heat exchanger performance evaluation. Chin Sci Bull, 2009, 54(15): 2708–2713
Chen Q, Wang M, Pan N, et al. Optimization principles for convective heat transfer. Energy, 2009, 34(9): 1199–1206
Guo Z, Liu X B, Tao W Q, et al. Effectiveness-thermal resistance method for heat exchanger design and analysis, Int J Heat Mass Transfer, 2010, 53(13/14): 2877–2884
Chen Q, Yang K, Wang M, et al. A new approach to analysis and optimization of evaporative cooling system I: Theory. Energy, 2010, 35(6): 2448–2454
Xia S, Chen L, Sun F. Entransy dissipation minimization for liquid-solid phase processes. Sci China Tech Sci, 2010, 53(4): 960–968
Guo J, Xu M, Cheng L. Principle of equipartition of entransy dissipation for heat exchanger design. Sci China Tech Sci, 2010, 53(5): 1309–1314
Guo J, Xu M, Cheng L. The entransy dissipation minimization principle under given heat duty and heat transfer area conditions. Chin Sci Bull, 2011, 56(19): 2071–2076
Guo J, Xu M, Chen L. The influence of viscous heating on the entransy in two-fluid heat exchangers. Sci China Tech Sci, 2011, 54(5): 1267–1274
Cheng X, Xu X, Liang X. Application of entransy to optimization design of parallel thermal network of thermal control system in spacecraft. Sci China Tech Sci, 2011, 54(4): 964–971
Cheng X, Liang X, Guo Z. Entransy decrease principle of heat transfer in an isolated system. Chin Sci Bull, 2011, 56(9): 847–854
Li X, Guo J, Xu M, et al. Entransy dissipation minimization for optimization of heat exchanger design. Chin Sci Bull, 2011, 56(20), 2174–2178
Hu G, Cao B, Guo Z. Entransy and entropy revisited. Chin Sci Bull, 2011, 56(27): 2974–2977
Xia S, Chen L, Sun F. Entransy dissipation minimization for a class of one-way isothermal mass transfer processes. Sci China Tech Sci, 2011, 54(2): 352–361
Qian X, Li Z. Analysis of entransy dissipation in heat exchangers. Int J Thermal Sci, 2011, 50(4): 608–614
Liu W, Liu Z, Jia H, et al. Entransy expression of the second law of thermodynamics and its application to optimization in heat transfer process. Int J Heat Transfer, 2011, 54(13–14): 3049–3059
Chen Q, Pan N, Guo Z. A new approach to analysis and optimization of evaporative cooling system II: Applications. Energy, 2011, 36(5): 2890–2898
Xu M. The thermodynamic basis of entransy and entransy dissipation. Energy, 2011, 36(7): 4272–4277
Wei S, Chen L, Sun F. “Volume-point” heat conduction constructal optimization with entransy dissipation minimization objective based on rectangular element. Sci China Ser E-Tech Sci, 2008, 51(8): 1283–1295
Wei S, Chen L, Sun F. Constructal multidisciplinary optimization of electromagnet based on entransy dissipation minimization. Sci China Ser E-Tech Sci, 2009, 52(10): 2981–2989
Xie Z, Chen L, Sun F. Constructal optimization for geometry of cavity by taking entransy dissipation minimization as objective. Sci China Ser E-Tech Sci, 2009, 52(12): 3504–3513
Xie Z, Chen L, Sun F. Constructal optimization on T-shaped cavity based on entransy dissipation minimization. Chin Sci Bull, 2009, 54(23): 4418–4427
Wei S, Chen L, Sun F. Constructal optimization of discrete and continuous-variable cross-section conducting path based on entransy dissipation rate minimization. Sci China Tech Sci, 2010, 53(6): 1666–1677
Xiao Q, Chen L, Sun F. Constructal entransy dissipation rate minimization for “disc-to-point” heat conduction. Chin Sci Bull, 2011, 56(1): 102–112
Xiao Q, Chen L, Sun F. Constructal entransy dissipation rate minimization for umbrella-shaped assembly of cylindrical fins. Sci China Tech Sci, 2011, 54(1): 211–219
Xiao Q, Chen L, Sun F. Constructal entransy dissipation rate and flow-resistance minimizations for cooling channels. Sci China Tech Sci, 2010, 53(9): 2458–2468
Wei S, Chen L, Sun F. Constructal entransy dissipation rate minimization of round tube heat exchanger cross-section. Int J Therm Sci, 2011, 50(7): 1285–1292
Chen L, Wei S, Sun F. Constructal entransy dissipation rate minimization of a disc. Int J Heat Mass Transfer, 2011, 54(1–3): 210–216
Xie Z, Chen L, Sun F. Comparative study on constructal optimizations of T-shaped fin based on entransy dissipation rate minimization and maximum thermal resistance minimization. Sci China Tech Sci, 2011, 41(7): 962–970
Xiao Q, Chen L, Sun F. Constructal design for a steam generator based on entransy dissipation extremum principle. Sci China Tech Sci, 2011, 54(6): 1462–1468
Xiao Q, Chen L, Sun F. Constructal entransy dissipation rate minimization for a heat generating volume cooled by forced convection. Chin Sci Bull, 2011, 56(27): 2966–2973
Bejan A. Heat Transfer. New York: Wiley, 1993
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Feng, H., Chen, L. & Sun, F. Constructal entransy dissipation rate minimization for leaf-like fins. Sci. China Technol. Sci. 55, 515–526 (2012). https://doi.org/10.1007/s11431-011-4649-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11431-011-4649-9