Abstract
A new analytical method for springback of small curvature plane bending is addressed with unloading rule of classical elastic-plastic theory and principle of strain superposition. We start from strain analysis of plane bending which has initial curvature, and the theoretic derivation is on the widely applicable basic hypotheses. The results are unified to geometry constraint equations and springback equation of plane bending, which can be evolved to straight beam plane bending and pure bending. The expanding and setting round process is one of the situations of plane bending, which is a bend-stretching process of plane curved beam. In the present study, springback equation of plane bending is used to analyze the expanding and setting round process, and the results agree with the experimental data. With a reasonable prediction accuracy, this new analytical method for springback of plane bending can meet the needs of applications in engineering.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Bai X Z. Mechanics of Materials. Beijing: China Building Materials Industry Press, 2003
Song L, Yang J, Huang T Z. Springback analysis of sheet metal bending and review of engineering control. Forging Stamping Technol, 1996, (1): 18–22
Zhu D P, Sun K, Li D C, et al. The new researche progress of sheet metal stamping springback. J Plast Eng, 2000, 7(1): 11–17
Gu R J, Yang H, Zhan M, et al. A review of the research on springback in bending. Mech Sci Technol Aerosp Eng, 2005, 24(6): 653–658
El-Megharbel A, El-Domiaty A A, Shaker M. Springback and residual stresses after stretch bending of workhardening sheet metal. J Mater Process Technol, 1990, 24(1): 191–200
El-Domiaty A A, Shabara M A N, Al-Ansary M D. Determination of stretch-bendability of sheet-metals. Int J Mach Tools Manuf, 1996, 36(5): 635–650
El-Domiaty A A, Elsharkawy A A. Stretch-bending analysis of U-section beam. Int J Mach Tools Manuf, 1998, 38(1): 75–95
Elsharkawy A A, El-Domiaty A A. Determination of stretch-bend-ability limits and springback for T-section beams. J Mater Process Technol, 2001, 110(3): 265–276
Zhang B Z. Bending deformation under transverse compression and longitudinal stretch. Metal Forming Technol, 1993, 11(6): 276–278, 283
Guan Y P. Calculation method of plastic bending springback. Die Mould Industry, 1999, (5): 11–13
Guan Y P. Springback analysis of sheet metal bending under stretch. Die Mould Technol, 1999, (2): 64–68
Du S, Anatoly C. Numerical calculation of stretch bending of narrow strip and analysis on springback. J Beijing Univ Aeronaut Astronaut, 2004, 30(9): 863–867
Du S. Numerical calculation and analysis on springback of sheet metal stretch bending. Forging Stamping Technol, 2004, (5): 19–22
Qian Z P, Lv M. Calculation of springback on stretch bending metal sections of car’s middle sliding rail. Metal Forming Technol, 2001, 19(3): 19–21
Jin C H, Zhou X B, Diao K S, et al. Springback analysis for stretch bending of aluminum profile. Mater Sci Technol, 2004, 12(5): 394–397
Diao K S, Zhou X B, Li X X, et al. Stretch bending of aluminum extrusion. J Beijing Univ Aeronaut Astronaut, 2005, 31(2): 134–137
Xie L S, Hu H. Finite element analysis for stretch bending of extrusions. Aviation Precis Manuf Technol, 2004, 40(5): 34–36
Li S B. Stamping Process Theory and New Technology. Beijing: Machinery Industry Press, 2002
Ma S L, Fu R B. Mechanics of Materials, Volume 2. Beijing: Machinery Industry Press, 1996
Xiao J R, Jiang K H. Stamping Technology. Beijing: Machinery Industry Press, 2006
Guo B F, Jin M, Li Q, et al. The method of prediction for the spring back of cylinders in mechanical expanding. J Plast Eng, 2006, 13(1): 8–12
Xiao S H, Zheng S X. Study on the mechanical expanding mechanism of large diameter longitudinal welded steel pipe. China Metal Forming Equip Manuf Technol, 2004, (5): 81–84
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Zhao, J., Yin, J., Ma, R. et al. Springback equation of small curvature plane bending. Sci. China Technol. Sci. 54, 2386–2396 (2011). https://doi.org/10.1007/s11431-011-4447-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11431-011-4447-4