Abstract
For a vertical insulating wall, a product function of heat flow and strength with power weight is introduced as the complex optimization objective to compromise between insulating performance and mechanical performance. Under the global constraints of fixed external dimensions and safety requirements, the constructal optimization of the wall is carried out by taking the complex function maximization as the objective. It is shown that the maximum of the complex-objective function and its corresponding optimal internal structure design under a certain environmental condition can be obtained by allowing the internal structure of the wall to vary (evolve) freely. The validity, effectivity and applicability of the complex function are proved by the results and the power weight parameter in the range from 0.4 to 4 can compromise between the requirements of insulating and strength simultaneously and preferably. The constructal optimization with coequal attention to heat flow and strength and the corresponding results are discussed in detail. The optimal structure design and the corresponding performance analyses under various environmental conditions of application are presented. When the change of environment is greater and the total Rayleigh number is bigger, the insulating wall with large number of cavities should be employed. When the total Rayleigh number is small, the better performance can be obtained by reasonably employing the insulating wall with small number of cavities. The complex function has better self-adaptability, and the results in the recent literature are special cases of this paper.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Bejan A. Street network theory of organization in nature. J Advanced Transportation, 1996, 30(2): 85–107
Bejan A. Shape and Structure, from Engineering to Nature. Cambridge, UK: Cambridge University Press, 2000
Bejan A, Lorente S. Thermodynamic optimization of flow geometry in mechanical and civil engineering. J Non-Equilib Thermodyn, 2001, 26(4): 305–354
Bejan A, Lorente S. The Constructal Law (La Loi Constructale). Paris: L’Harmatan, 2005
Bejan A, Lorente S. Constructal theory of generation of configuration in nature and engineering. J Appl Phys, 2006, 100(4): 041301
Reis A H. Constructal theory: From engineering to physics, and how flow systems develop shape and structure. Appl Mech Rev, 2006, 59(5): 269–282
Bejan A, Lorente S, Miguel A, et al. Along with Constructal Theory. In: Hernandez J, Cosinschi M, eds. UNIL FGSE Workshop Series No. 1. University of Lausanne, Faculty of Geosciences and the Environment, Switzerland, 2006
Bejan A, Lorente S. Design with Constructal Theory. New Jersey: Wiley, 2008
Bejan A, Merkx G W. Constructal Theory of Social Dynamics. New York: Springer, 2007
Bejan A, Lorente S, Miguel A F, et al. Constructal Human Dynamics, Security & Sustainability. Amsterdam: IOS Press, 2009
Bejan A, Badescu V, De Vos A. Constructal theory of economics. Appl Energy, 2000, 67(1): 37–60
Zhou S, Chen L, Sun F. Optimization of constructal economics for volume to point transport. Appl Energy, 2007, 84(5): 505–511
Bejan A, Dincer I, Lorente S, et al. Porous and Complex Flow Structures in Modern Technologies. New York: Springer, 2004
Bejan A, Reis A H. Thermodynamic optimization of global circulation and climate. Int J Energy Res, 2005, 29(4): 303–316
Bejan A, Marden J H. Unifying Constructal theory for scale effects in running, swimming and flying. J Experimental Biology, 2006, 209(2): 238–248
Dai W, Bejan A, Tang X, et al. Optimal temperature distribution in a three dimensional triple-layered skin structure with embedded vasculature. J Appl Phys, 2006, 99(10): 104702
Lorente S. Constructal view of electrokinetic transfer through porous media. J Phys D: Appl Phys, 2007, 40(9): 2941–2947
Guo Z, Cheng X, Xia Z. Least dissipation principle of heat transport potential capacity and its application in heat conduction optimization. Chin Sci Bull, 2003, 48(4): 406–410
Meng J, Liang X, Li Z. Field synergy optimization and enhanced heat transfer by multi-longitudinal vortices flow in tube. Int J Heat Mass Transfer, 2005, 48(16): 3331–3337
Cheng X, Meng J, Guo Z. Potential capacity dissipation minimization and entropy generation minimization in heat conduction optimization (in Chinese). J Eng Thermophys 2005, 26(6): 1034–1036
Han G, Zhu H, Cheng X, et al. Transfer similarity among heat conduction, elastic motion and electric conduction (in Chinese). J Eng Thermophys, 2005, 26(6): 1022–1024
Guo Z, Zhu H, Liang X. Entransy—A physical quantity describing heat transfer ability. Int J Heat Mass Transfer, 2007, 50(13–14): 2545–2556
Zhu H, Chen J, Guo Z. Electricity and thermal analogous experimental study for entransy dissipation extreme principle (in Chinese). Prog Natural Sci, 2007, 17(12): 1692–1698
Han G, Guo Z. Two different thermal optimization objective functions: dissipation of heat transport potential capacity and entropy production (in Chinese). J Eng Thermophys, 2007, 27(5): 811–813
Han G, Guo Z. Physical mechanism of heat conduction ability dissipation and its analytical expression (in Chinese). Proc CSEE, 2007, 27(17): 98–102
Liu X, Meng J, Guo Z. Entropy generation extremum and entransy dissipation extremum for heat exchanger optimization. Chin Sci Bull, 2009, 54(6): 943–947
Chen Q, Ren J. Generalized thermal resistance for convective heat transfer and its relation to entransy dissipation. Chin Sci Bull, 2008, 53(23): 3753–3761
Chen Q, Ren J, Guo Z. Field synergy analysis and optimization of decontamination ventilation designs. Int J Heat Mass Transfer, 2008, 51(3–4): 873–881
Zhang Y, Liu S. The optimization model of the heat conduction structure. Prog Natl Sci, 2008, 18(6): 665–670
Liu X, Guo Z, Meng J. Analyses for entransy dissipation and heat resistance in heat exchangers (in Chinese). Prog Natl Sci, 2008, 18(10): 1186–1190
Cheng X, Xu X, Liang X. Homogenization of temperature field and temperature gradient field. Sci China Ser E-Tech Sci, 2009, 52(10): 2937–2942
Wu J, Liang X. Application of entransy dissipation extremum principle in radiative heat transfer optimization. Sci China Ser E-Tech Sci, 2008, 51(8): 1306–1314
Wei S, Chen L, Sun F. “Volume-point” heat conduction constructal optimization with entransy dissipation minimization objective based on rectangular element. Sci China Ser E-Tech Sci, 2008, 51(8): 1283–1295
Wei S, Chen L, Sun F. Constructal multidisciplinary optimization of electromagnet based on entransy dissipation minimization. Sci China Ser E-Tech Sci, 2009, 52(10): 2981–2989
Wang S, Chen Q, Zhang B, et al. A general theoretical principle for single-phase convective heat transfer enhancement. Sci China Ser E-Tech Sci, 2009, 52(12): 3521–3526
Xie Z, Chen L, Sun F. Constructal optimization for geometry of cavity by taking entransy dissipation minimization as objective. Sci China Ser E-Tech Sci, 2009, 52(12): 3504–3513
Chen Q, Ren J, Guo Z. The extremum principle of mass entransy dissipation and its application to decontamination ventilation designs in space station cabins. Chin Sci Bull, 2009, 54(16): 2862–2870
Xie Z, Chen L, Sun F. Constructal optimization on T-shaped cavity based on entransy dissipation minimization. Chin Sci Bull, 2009, 54(23): 4418–4427
Xia S, Chen L, Sun F. Optimization for entransy dissipation minimization in heat exchanger. Chin Sci Bull, 2009, 54(19): 3587–3595
Wang S, Chen Q, Zhang B. An equation of entransy and its application. Chin Sci Bull, 2009, 54(19): 3572–3578
Guo J, Cheng L, Xu M. Entransy dissipation number and its application to heat exchanger performance evaluation. Chin Sci Bull, 2009, 54(15): 2708–2713
Liu X, Guo Z. A novel method for heat exchanger analysis (in Chinese). Acta Phys Sin, 2009, 58(7): 4766–4771
Chen Q, Wang M, Pan N, et al. Irreversibility of heat conduction in complex multiphase systems and its application to the effective thermal conductivity of porous media. Int J Nonlinear Sci Numer Simul, 2009, 10(1): 57–66
Chen Q, Wang M, Pan N, et al. Optimization principles for convective heat transfer. Energy, 2009, 34(9): 1199–1206
Chen L, Chen Q, Li Z, et al. Optimization for a heat exchanger couple based on the minimum thermal resistance principle. Int J Heat Mass Transfer, 2009, 52(21–22): 4778–4784
Wei S. Constructal entransy dissipation rate minimization for heat conduction. Ph D Thesis. Wuhan: Naval University of Engineering, 2009
Li Z, Guo Z. Field Synergy Principle of Heat Convection Optimization (in Chinese). Beijing: Science Press, 2010
Guo Z, Liu X B, Tao W Q, et al. Effectiveness-thermal resistance method for heat exchanger design and analysis. Int J Heat and Mass Transfer, 2010, 53(13–14): 2877–2884
Wei S, Chen L, Sun F. Constructal entransy dissipation minimization for ‘volume-point’ heat conduction without the premise of optimized last-order construct. Int J Exergy, 2010, 7(5): 627–639
Xia S, Chen L, Sun F. Optimal paths for minimizing entransy dissipation during heat transfer processes with generalized radiative heat transfer law. Appl Math Model, 2010, 34(8): 2242–2255
Xia S, Chen L, Sun F. Entransy dissipation minimization for liquid-solid phase processes. Sci China: Tech Sci, 2010, 53(4): 960–968
Wei S, Chen L, Sun F. Constructal optimization of discrete and continuous variable cross-section conducting path based on entransy dissipation rate minimization. Sci China: Tech Sci 2010, 53, doi: 10.1007/s11431-010-0121-5
Wei S, Chen L, Sun F. Constructal entransy dissipation minimization for ‘volume-point’ heat conduction based on triangular element. Thermal Sci, 2010, (in press)
Xiao Q, Chen L, Sun F. Constructal entransy dissipation rate minimization for “disc-point” heat conduction. Chin Sci Bull, 2010, (in press)
Chen L. Finite Time Thermodynamic Analysis of Irreversible Processes and Cycles (in Chinese). Beijing: Higher Education Press, 2005
Wang J, He J, Mao Z. Performance of a quantum heat engine cycle working with harmonic oscillator systems. Sci China Ser G-Phys Mech & Astron, 2007, 50(2): 163–176
Song H, Chen L, Sun F. Optimal configuration of a class of endoreversible heat engines for maximum efficiency with radiative heat transfer law. Sci China Ser G-Phys Mech & Astron, 2008, 51(9): 1272–1286
Li J, Chen L, Sun F. Optimal configuration for a finite high-temperature source heat engine cycle with complex heat transfer law. Sci China Ser G-Phys Mech & Astron, 2009, 52(4): 587–592
Xia S, Chen L, Sun F. The optimal path of piston motion for Otto cycle with linear phenomenological heat transfer law. Sci China Ser G-Phys Mech & Astron, 2009, 52(5): 708–719
He J, He X, Tang W. The performance characteristics of an irreversible quantum Otto harmonic cycles. Sci China Ser G-Phys Mech & Astron, 2009, 52(9): 1317–1323
Xia S, Chen L, Sun F. Maximum power output of a class of irreversible non-regeneration heat engines with a non-uniform working fluid and linear phenomenological heat transfer law. Sci China Ser G-Phys Mech & Astron, 2009, 52(12): 1961–1970
Liu X, Chen L, Wu F, et al. Ecological optimization of an irreversible harmonic oscillators Carnot heat engine. Sci China Ser G-Phys Mech & Astron, 2009, 52(12): 1976–1988
Xia D, Chen L, Sun F. Optimal performance of a generalized irreversible four-reservoir isothermal chemical potential transformer. Sci China Ser B-Chem, 2008, 51(10): 958–970
Shu L, Chen L, Sun F. The minimal average heat consumption for heat-driven binary separation process with linear phenomenological heat transfer law. Sci China Ser B-Chem, 2009, 52(8): 1154–1163
Ding Z, Chen L, Sun F. Thermodynamic characteristic of a Brownian heat pump in a spatially periodic temperature field. Sci China: Phys Mech & Astron, 2010, 53(5): 876–885, doi: 10.1007/s11433-010-0181-3
Ma K, Chen L, Sun F. Optimal paths for a light-driven engine with linear phenomenological heat transfer law. Sci China: Chem, 2010, 53(4): 917–926
Xia S, Chen L, Sun F. Maximum work configurations of finite potential reservoir chemical engines. Sci China: Chem, 2010, 53(5): 1168–1176, doi: 10.1007/s11426-010-0132-x
Dan N, Bejan A. Constructal tree networks for the time-dependent discharge of finite-size volume to one point. J Appl Phys, 1998, 84(6): 3042–3050
Bejan A. Constructal-theory network of conducting paths for cooling a heat generating volume. Trans ASME J Heat Transfer, 1997, 40(4): 799–816
Zhou S, Chen L, Sun F. Optimization of constructal volume-point conduction with variable cross-section conducting path. Energy Convers Mgmt, 2007, 48(1): 106–111
Wu W, Chen L, Sun F. On the “area to point” flow problem based on constructal theory. Energy Convers Mgmt, 2007, 48(1): 101–105
Wu W, Chen L, Sun F. Improvement of tree-like network constructal method for heat conduction optimization. Sci China Ser E-Tech Sci, 2006, 49(3): 332–341
Wei S, Chen L, Sun F. The volume-point constructal optimization for discrete variable cross-section conducting path. Appl Energy, 2009, 86(7–8): 1111–1118
Chen L, Wu W, Sun F. Constructal re-optimization of heat conduction with the triangular elemental area. Rev Mexi Fis, in press
Bejan A, Almogbel M. Constructal T-shaped fins. Int J Heat Mass Transfer, 2000, 43(12–15): 2101–2115
Bejan A, Rocha L A O, Lorente S. Thermodynamic optimization of geometry: T- and Y-shaped constructs of fluid streams. Int J Thermal Sci, 2000, 39(9–11): 949–960
Bejan A, Fautrelle Y. Constructal multi-scale structure for maximal heat transfer density. Acta Mechanica, 2003, 163(1–2): 39–49
da Silva A K, Bejan A. Constructal multi-scale structure for maximal heat transfer density in natural convection. Int J Heat Fluid Flow, 2005, 26(1): 34–44
Lorente S, Wechsatol W, Bejan A. Tree-shaped flow structures designed by minimizing path lengths. Int J Heat Mass Transfer, 2002, 45(16): 3299–3312
Vargas J V C, Bejan A. Thermodynamic optimization of finned crossflow heat exchangers for aircraft environmental control systems. Int J Heat Fluid Flow, 2001, 22(6): 657–665
Morega A M, Bejan A. A constructal approach to the optimal design of photovoltaic cells. Int J Green Energy, 2005, 2(3): 233–242
Vargas J V C, Ordonez J C, Bejan A. Constructal PEM fuel cell stack design. Int J Heat Mass Transfer, 2005, 48(21–22): 4410–4427
Bejan A, Errera M R. Convective trees of fluid channels for volumetric cooling. Int J Heat Mass Transfer, 2000, 43(17): 3105–3118
Wechsatol W, Lorente S, Bejan A. Dendritic convection on a disc. Int J Heat Mass Transfer, 2003, 46(23): 4381–4391
da Silva A K, Bejan A. Constructal multi-scale structure for maximal heat transfer density in natural convection. Int J Heat Fluid Flow, 2005, 26(1): 34–44
Zimparov V D, da Silva A K, Bejan A. Thermodynamic optimization of tree-shaped flow geometries. Int J Heat Mass Transfer, 2006, 49(9–10): 1619–1630
Luo L, Fan Y, Zhang W, et al. Integration of constructal distributors to a mini crossflow heat exchanger and their assembly configuration optimization. Chem Eng Sci, 2007, 62(13): 3605–3619
Wechsatol W, Lorente S, Bejan A. Tree-shaped insulated designs for the uniform distribution of hot water over an area. Int J Heat Mass Transfer, 2001, 44(16): 3111–3123
Azoumah Y, Neveu P, Mazet N. Constructal design combined with entropy generation minimization for solid-gas reactors. Int J Thermal Sci, 2006, 45(7): 716–728
Zhou S, Chen L, Sun F. Constructal optimization for solid-gas reactors based on triangular element. Sci China Ser E-Tech Sci, 2008, 51(9): 1554–1562
Lorente S, Bejan A. Combined ‘flow and strength’ geometric optimization: internal structure in a vertical insulating wall with air cavities and prescribed strength. Int J Heat Mass Transfer, 2002, 45(16): 3313–3320
Gosselin L, Bejan A, Lorente S. Combined ‘heat flow and strength’ optimization of geometry: mechanical structures most resistant to thermal attack. Int J Heat Mass Transfer, 2004, 47(14–16): 3477–3489
Gosselin L, da Silva A K. Combined ‘heat transfer and power dissipation’ optimization of nanofluid flows. Appl Phys Letter, 2004, 85(18): 4160–4162
Gosselin L, Bejan A. Constructal thermal optimization of an electromagnet. Int J Thermal Sci, 2004, 43(4): 331–338
Wei S, Chen L, Sun F. Constructal complex-objective optimization of electromagnet based on magnetic induction and maximum temperature difference. Rev Mexi Fis, 2010, in press
Bejan A. Convection Heat Transfer, 2nd ed. New York: Wiley, 1995
Bejan A. Note on Gill’s solution for free convection in a vertical enclosure. J Fluid Mech, 1979, 90: 561–568
Churchill S W, Usagi R. A standardized procedure for the production of correlations in the form of a common empirical equation. Indust Eng Chem Fund, 1974, 13(1): 39–44
Chen L, Zhang J. MCDM and the introduction of optimal model selection and design application of steam turbine in warship (in Chinese). Turbine Tech, 1986, 28(5): 58–70
Yan Z. η and P of a Carnot engine at maximum (η λ P) (in Chinese). J Xiamen Univ, 1986, 25(3): 279–286
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Xie, Z., Chen, L. & Sun, F. Constructal optimization of a vertical insulating wall based on a complex objective combining heat flow and strength. Sci. China Technol. Sci. 53, 2278–2290 (2010). https://doi.org/10.1007/s11431-010-4003-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11431-010-4003-7