Abstract
A procedure for nonproportional low-cycle fatigue life assessment is proposed for various metal alloys that differ in structure. It is based on the Pisarenko-Lebedev equivalent strain and a correcting function allowing for nonproportional loading effects such as additional hardening and life reduction in the case of nonproportional strain paths. The calculated results are compared to the experimental ones reported elsewhere for steels, titanium-, nickel-, and aluminum-based alloys. A good agreement between the results is observed for all the materials and strain paths studied. The accuracy of the calculations for nonproportional loading is found to be same as in the case of proportional loading.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
K. Kanazawa, K. J. Miller, and M. W. Brown, “Low-cycle fatigue under out-of-phase loading conditions,” Trans. ASME J. Eng. Mater. Techn., 99, 222–228 (1977).
N. S. Mozharovskii and S. N. Shukaev, “Endurance of structural materials with nonproportional paths of low cycle loading,” Strength Mater., 20, No. 10, 1328–1336 (1988).
D. F. Socie, P. Kurath, and J. Koch, “A multiaxial fatigue damage parameter. Biaxial and multiaxial fatigue,” in: M. W. Brown and K. J. Miller (Eds.), Mechanical Engineering Publications, London (1989), pp. 535–550.
S. H. Doong, D. F. Socie, and I. M. Robertson, “Dislocation substructures and nonproportional hardening,” Trans. ASME J. Eng. Mater. Techn., 112, No. 4, 456–464 (1990).
M. V. Apaichev, I. A. Ivanov, A. P. Pon’kin, “Modeling of the effects of isotropic strengthening in nonproportional cyclic loading,” Strength Mater., 23, No. 7, 770–774 (1991).
T. Itoh, M. Sakane, M. Ohnami, and D. F. Socie, “Nonproportional low-cycle fatigue criterion for type 304 stainless steel,” Trans. ASME J. Eng. Mater. Techn., 117, No. 3, 285–292 (1995).
T. Itoh, T. Nakata, M. Sakane, and M. Ohnami, “Nonproportional low-cycle fatigue of 6061 aluminium alloy under 14_strain paths,” in: 5th Int. Conf. on Biaxial/Multiaxial Fatigue and Fracture, Cracow, Poland (1997).
S. N. Shukaev, “Deformation and life of titanium alloy VT9 under conditions of nonproportional low-cycle loading,” Strength Mater., 33, No. 4, 333–338 (2001).
X. Chen, K. An, and K. S. Kim, “Low-cycle fatigue of 1Cr-18Ni-9Ti stainless steel and related weld metal under axial, torsional and out-of-phase loading,” Fatigue Fract. Eng. Mater. Struct., 27, 439–448 (2004).
A. Nitta, T. Ogata, and K. Kuwabara, “The effect of axial-torsional straining phase on elevated-temperature biaxial low-cycle fatigue life in SUS 304 stainless steel,” J. Soc. Mater. Sci., 36, No. 403, 376–382 (1987).
S. N. Shukaev and M. N. Gladskii, “Low-cycle fatigue of VT1-0 titanium alloy under proportional and nonproportional loading,” Nauk. Visti NTUU “KPI,” Issue 6, 86–92 (2005).
S. N. Shukaev, “Nonproportional low-cycle fatigue criteria,” Mashinoznavstvo, No. 3, 6–9 (1997).
S. N. Shukaev, A. A. Zakhovaiko, M. N. Gladskii, and K. V. Panasovskii, “Review of low-cycle fatigue criteria for multiaxial loading conditions,” Nadezhn. Dolgovechn. Mashin Sooruzh., No. 2, 127–135 (2004).
M. V. Borodii, “Obtaining a low-cycle fatigue strain criterion,” Strength Mater., 33, No. 3, 217–223 (2001).
Author information
Authors and Affiliations
Additional information
__________
Translated from Problemy Prochnosti, No. 4, pp. 31–39, July–August, 2007.
Rights and permissions
About this article
Cite this article
Shukaev, S.N., Panasovskii, K.V. & Gladskii, M.N. Fatigue life assessment for metal alloys under nonproportional low-cycle loading. Strength Mater 39, 358–364 (2007). https://doi.org/10.1007/s11223-007-0040-2
Received:
Issue Date:
DOI: https://doi.org/10.1007/s11223-007-0040-2