Abstract
Latest scientific and engineering advances have started to recognize the need for defining multiple types of uncertainty. Probabilistic modeling cannot handle situations with incomplete or little information on which to evaluate a probability, or when that information is nonspecific, ambiguous, or conflicting [12], [47], [50]. Many interval-based uncertainty models have been developed to treat such situations.
This paper presents an interval approach for the treatment of parameter uncertainty for linear static structural mechanics problems. Uncertain parameters are introduced in the form of unknown but bounded quantities (intervals). Interval analysis is applied to the Finite Element Method (FEM) to analyze the system response due to uncertain stiffness and loading.
To avoid overestimation, the formulation is based on an element-by-element (EBE) technique. Element matrices are formulated, based on the physics of materials, and the Lagrange multiplier method is applied to impose the necessary constraints for compatibility and equilibrium. Earlier EBE formulation provided sharp bounds only on displacements [32]. Based on the developed formulation, the bounds on the system’s displacements and element forces are obtained simultaneously and have the same level of accuracy. Very sharp enclosures for the exact system responses are obtained. A number of numerical examples are introduced, and scalability is illustrated.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Akpan, U. O., Koko, T. S., Orisamolu, I. R., and Gallant, B. K.: Practical Fuzzy Finite Element Analysis of Structures, Finite Elem. Anal. Des. 38 (2001), pp. 93–111.
Alefeld, G. and Herzberger, J.: Introduction to Interval Computations, Academic Press, New York, 1983.
Apostolatos, N. and Kulisch, U.: Grundzuge einer Intervallrechtung fur Matrizen und einige Anwwendungen, Elektron. Rechenanlagen 10 (1968), pp. 73–83 (in German).
Bathe, K.: Finite Element Procedures, Prentice Hall, Upper Saddle River, 1996.
Ben-Haim, Y. and Elishakoff, I.: Convex Models of Uncertainty in Applied Mechanics, Elsevier Science, Amsterdam, 1990.
Berleant, D.: Automatically Verified Reasoning with Both Intervals and Probability Density Functions, Interval Computations (2) (1993), pp. 48–70.
Buonopane, S. G., Schafer, B. W., and Igusa, T.: Reliability Implications of Advanced Analysis in Design of Steel Frames, in: Proc. ASSCCA'03, Sydney, 2003.
Chen, S. H., Lian, H. D., and Yang, X. W.: Interval Static Displacement Analysis for Structures with Interval Parameters, Int. J. Numer. Methods Engrg. 53 (2002), pp. 393–407.
Cook, R. D., Malkus, D. S., and Plesha, M. E.: Concepts and Applications of Finite Element Analysis, John Wiley & Sons, 1989.
Dempster, A. P.: Upper and Lower Probabilities Induced by a Multi-Valued Mapping, Ann. Mat. Stat. 38 (1967), pp. 325–339.
Dessombz, O., Thouverez, F., Laîné, J.-P., and Jézéquel, L.: Analysis of Mechanical Systems Using Interval Computations Applied to Finite Elements Methods, J. Sound. Vib. 238 (5) (2001), pp. 949–968.
Ferson, S. and Ginzburg, L. R.: Different Methods Are Needed to Propagate Ignorance and Variability, Reliab. Engng. Syst. Saf. 54 (1996), pp. 133–144.
Ferson, S., Kreinovich, V., Ginzburg, L., Myers, D. S., and Sentz, K.: Constructing Probability Boxes and Dempster-Shafer Structures, Technical Report SAND2002-4015, Sandia National Laboratories, 2003.
Gallagher, R. H.: Finite Element Analysis Fundamentals, Prentice Hall, Englewood Cliffs, 1975.
Ganzerli, S. and Pantelides, C. P.: Load and Resistance Convex Models for Optimum Design, Struct. Optim. 17 (1999), pp. 259–268.
Gay, D. M.: Solving Interval Linear Equations, SIAM J. Numer. Anal. 19 (4) (1982), pp. 858–870.
Hansen, E.: Global Optimization Using Interval Analysis, Marcel Dekker, New York, 1992.
Hansen, E.: Interval Arithmetic in Matrix Computation, SIAM J. Numer. Anal. I (2) (1965), pp. 308–320.
Jansson, C.: Interval Linear System with Symmetric Matrices, Skew-Symmetric Matrices, and Dependencies in the Right Hand Side, Computing 46 (1991), pp. 265–274.
Kearfott, R. B., Nakao, M., Neumaier, A., Rump, S., Shary, S., and van Hentenryck, P.: Standardized Notation in Interval Analysis, Reliable Computing, submitted.
Kendall, D. G.: Foundations of a Theory of Random Sets, in: Harding, E. and Kendall, D. (eds), Stochastic Geometry, New York, 1974, pp. 322–376.
Koyluoglu, U., Cakmak, S., Ahmet, N., and Soren, R. K.: Interval Algebra to Deal with Pattern Loading and Structural Uncertainty, J. Engrg. Mech. 121 (11) (1995), pp. 1149–1157.
Lodwick, W. A. and Jamison, K. D.: Special Issue: Interface between Fuzzy Set Theory and Interval Analysis, Fuzzy Sets and Systems 135 (2002), pp. 1–3.
Mayer, O.: Algebraische und Metrische Strukturen in der Intervallrechung und eingine Anwendungen, Computing 5 (1970), pp. 144–162 (in German).
McWilliam, S.: Anti-Optimisation of Uncertain Structures Using Interval Analysis, Comput. Struct. 79 (2000), pp. 421–430.
Melchers, R. E.: Structural Reliability Analysis and Prediction, 2 edition, John Wiley & Sons, West Sussex, 1999.
Moller, B., Graf, W., and Beer, M.: Fuzzy Structural Analysis Using Level-Optimization, Comput. Mech. 26 (6) (2000), pp. 547–565.
Moore, R. E.: Interval Analysis, Prentice Hall, Englewood Cliffs, 1966.
Moore, R. E.: Methods and Applications of Interval Analysis, SIAM, Philadelphia, 1979.
Muhanna, R. L. and Mullen, R. L.: Development of Interval Based Methods for Fuzziness in Continuum Mechanics, in: Proc. ISUMA-NAFIPS'95, 1995, pp. 23–45.
Muhanna, R. L. and Mullen, R. L.: Formulation of Fuzzy Finite Element Methods for Mechanics Problems, Compu.-Aided Civ. Infrastruct. Engrg. 14 (1999), pp. 107–117.
Muhanna, R. L. and Mullen, R. L.: Uncertainty in Mechanics Problems–Interval-Based Approach, J. Engrg. Mech. 127 (6) (2001), pp. 557–566.
Mullen, R. L. and Muhanna, R. L.: Bounds of Structural Response for All Possible Loadings, J. Struct. Engrg., ASCE 125 (1) (1999), pp. 98–106.
Mullen, R. L. and Muhanna, R. L.: Structural Analysis with Fuzzy-Based Load Uncertainty, in: Proc. 7th ASCE EMD/STD Joint Spec. Conf. on Probabilistic Mech. and Struct. Reliability, 1996, pp. 310–313.
Neumaier, A.: Interval Methods for Systems of Equations, Cambridge University Press, 1990.
Neumaier, A.: Overestimation in Linear Interval Equations, SIAM J. Numer. Anal. 24 (1) (1987), pp. 207–214.
Neumaier, A.: Rigorous Sensitivity Analysis for Parameter-Dependent Systems of Equations, J. Math. Anal. Appl. 144 (1989), pp. 14–25.
Pantelides, C. P. and Ganzerli, S.: Comparison of Fuzzy Set and Convex Model Theories in Structural Design, Mech. Systems Signal Process. 15 (3) (2001), pp. 499–511.
Pownuk, A.: Calculation of the Extreme Values of Displacements in Truss Structures with Interval Parameters, 2004, http://s212.bud.polsl.gliwice.pl/ andrzej/ php/apdl2interval/apdl2interval init.php.
Pownuk, A.: Efficient Method of Solution of Large Scale Engineering Problems with Interval Parameters, in: Muhanna, R. L. and Mullen, R. L. (eds), Proc. NSF Workshop on Reliable Engineering Computing, Savannah, 2004, http://www.gtsav.gatech.edu/rec/recworkshop/index.html.
Rao, S. S. and Berke, L.: Analysis of Uncertain Structural Systems Using Interval Analysis, AIAA J. 35 (4) (1997), pp. 727–735.
Rao, S. S. and Chen, L.: Numerical Solution of Fuzzy Linear Equations in Engineering Analysis, Int. J. Numer. Meth. Engng. 43 (1998), pp. 391–408.
Rohn, J.: Linear Interval Equations: Computing Sufficiently Accurate Enclosures Is NP-Hard, Technical Report 621, Institute of Computer Science, Academy of Sciences of the Czech Republic, 1995.
Rump, S. M.: On the Solution of Interval Linear Systems, Computing 47 (1992), pp. 337–353.
Rump, S. M.: Self-Validating Methods, Linear Algebra Appl. 324 (2001), pp. 3–13.
Rump, S. M.: Solving Algebraic Problems with High Accuracy, in: Kulisch, U. and Miranker, W. (eds), A New Approach to Scientific Computation, Academic Press, New York, 1983.
Sentz, K. and Ferson, S.: Combination of Evidence in Dempster-Shafer Theory, Technical Report SAND2002–0835, Sandia National Laboratories, 2002.
Shafer, G.: A Mathematical Theory of Evidence, Princeton University Press, Princeton, 1976.
Sun Microsystems: Interval Arithmetic in High Performance Technical Computing, Sun Microsystems, 2002 (a White Paper).
Walley, P.: Statistical Reasoning with Imprecise Probabilities, Chapman and Hall, London, 1991.
Zadeh, L. A.: Fuzzy Sets as a Basis for a Theory of Possibility, Fuzzy Sets and Systems 1 (1978), pp. 3–28.
Zhang, H.: Nodeterministic Linear Static Finite Element Analysis: An Interval Approach, Ph.D. thesis, Georgia Institute of Technology, 2005.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Muhanna, R.L., Zhang, H. & Mullen, R.L. Interval Finite Elements as a Basis for Generalized Models of Uncertainty in Engineering Mechanics. Reliable Comput 13, 173–194 (2007). https://doi.org/10.1007/s11155-006-9024-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11155-006-9024-3