The compactability of iron powders and electrolytic titanium using driven rolls of different diameters at the same angular velocity is examined. The roll diameter ratio is 1.12 to 1.42. It is established that the rolling force can be decreased from 20 to 50% in asymmetric rolling depending on variation in the mismatch of circumferential velocities or diameters of the rolls as compared with conventional (symmetric) rolling at the same density of rolled product.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
V. P. Katashinskii and G. A. Vinogradov, “Investigation into the compactability of metal powders during rolling,” Powder Metall. Met. Ceram., 4, No. 5, 356–361 (1965).
G. A. Vinogradov and V. I. Katashinskii, “Study of specific pressure during the rolling of metal powders,” Powder Metall. Met. Ceram., 2, No. 3, 198–203 (1963).
S. Masaki, T. Hirohata, and Q. B. Zhu, “Compacting metal powder differential speed rolling,” Adv. Technol. Plasticity, No. 1, 182–187 (1993).
S. Masaki, T. Hirohata, and T. Haga, “Characteristics of electrolytic copper powder compaction by differential speed rolling,” ISME Int. J. C., 40, No. 3, 518–524 (1997).
T. Hirohata, S. Masaki, and S. Shima, “Experiment on metal powder compaction by differential speed rolling,” J. Manip. Physiolog. Therapeutics, 111, No. 1–3, 113–117 (2001).
G. Ya. Kalutskii, K. A. Gogaev, and V. S. Voropaev, “Prospective development of rolling of metal powders and granules,” in: Improving the Pressing Processes and Equipment in Metallurgy and Mechanical Engineering (Collected Scientific Papers) [in Russian], Donetsk Gos. Mashinostr. Akadem., Kramatorsk (2007), pp. 508–512.
G. Ya. Kalutskii, K. A. Gogaev, V. S. Voropaev, and V. S. Nepomnyashchii, “Asymmetric rolling of metal powder and granules,” Powder Metall. Met. Ceram., 46, No. 3–4, 197–201 (2007).
G. Ya. Kalutskii, K. O. Gogaev, and V. S. Voropaev, A Method for Obtaining Sheets, Bands, and Strips [in Ukrainian], Patent No. 77719, Ukraine, Published October 25 (2007).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Poroshkovaya Metallurgiya, Vol. 48, No. 3–4 (466), pp. 36–42, 2009.
Rights and permissions
About this article
Cite this article
Gogaev, K.A., Kalutskii, G.Y. & Voropaev, V.S. Asymmetric rolling of metal powders. I. Compactability of metal powders in asymmetric rolling. Powder Metall Met Ceram 48, 152–156 (2009). https://doi.org/10.1007/s11106-009-9116-9
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11106-009-9116-9