Aspects of plotting of thermokinetic diagrams of transformation of supercooled austenite in low-alloy steels are analyzed critically using published data and results of own studies. Special attention is devoted to the methods of processing and visual representation of experimental data. Recommendations on representation of results for developing unified approaches to plotting and interpreting the diagrams obtained are developed.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
A. V. Lopatin and A. V. Prokhorov, “Isothermal and kinetic transformation of supercooled austenite,” Stal’, No. 11 – 12, 48 – 49 (1941).
M. A. Smirnov, V. M. Schastlivtsev, and L. G. Zhuravlev, Fundamentals of Heat Treatment of Steel [in Russian], Nauka i Teknologii, Moscow (2002), 519 p.
ASM Handbook, Volume 4, Heat Treating, ASM International (1991), 1012 p.
M. L. Bernshtein and A. G. Rakhshtadt (eds.), Metal Science and Heat Treatment of Steel, A Handbook, Vol. 2 [in Russian], Metallurgiya, Moscow (1983), 368 p.
A. A. Popov and L. E. Popova, Isothermal and Thermokinetic Diagrams of Decomposition of Supercooled Austenite, A Handbook of Heat Treatment Specialist [in Russian], Mashgiz, Sverdlovsk (1961), 430 p.
ASTM A 1033–04, Standard Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations, ASTM (2004), 14 p.
P. V. Romanov and V. P. Radchenko, Transformation of Austenite in Continuous Cooling of Steel, Atlas of Thermokinetic Diagrams, Part 1 [in Russian], Izd. Sib. Otd. Akad. Nauk SSSR, Novosibirsk (1960), 51 p.
X Guang, W. Lun, Y Shengfu, et al., “A new method for accurate plotting of continuous cooling transformation curves,” Mater. Lett., 62, 3978 – 3980 (2008).
V. T. Cherepin, Experimental Equipment in Physical Metallurgy [in Russian], Tekhnika, Kiev (1968), 280 p.
X. Li, A. P. Miodownik, N. Saunders, and J.-Ph. Schille, “Transformed-software simplifies alloy heat treatment, production and design,” Mater. World, May, 21 – 23 (2002).
L. A. Bobrzanski and J. Trzaska, “Application of neutral networks to forecasting CCT diagrams,” J. Mater. Process. Technol., 157 – 158, 107 – 113 (2004).
E. Gudremon, Special Steels, Vol. 1 [Russian translation], Metallurgizdat, Moscow (1959), 952 p.
N. A. Nikishin, A. M. Sokolov, and V. G. Ul’yanov, “Effect of heating rate on the critical temperatures of alpha-gamma transformation in steel 40Kh,” Metalloved. Term. Obrab. Met., No. 8, 2 – 4 (1991).
L. I. Gladshtein, T. N. Rivanenok, and A. V. Khristov, “Dilatometric analysis of the kinetics of polymorphic transformation in heating of steel,” Zavod. Lab., Diagn. Mater., No. 6, 36 – 39 (2008).
V. D. Sadovskii, Structure Inheritance in Steel [in Russian], Metallurgiya, Moscow (1973).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 12, pp. 37 – 41, December, 2010.
Rights and permissions
About this article
Cite this article
Ryzhkov, M.A., Popov, A.A. Methodological aspects of plotting of thermokinetic diagrams of transformation of supercooled austenite in low-alloy steels. Met Sci Heat Treat 52, 612–616 (2011). https://doi.org/10.1007/s11041-011-9329-7
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11041-011-9329-7