Abstract
The results obtained in an experimental investigation of deformability of expanded polystyrene (EPS) under short-term compression are presented. The density of EPS varied from 13 to 28 kg/m3. The method of design of experiments was used to determine the elastic modulus and the ultimate strain (corresponding to the end of quasi-linear deformability) under compression stresses operating perpendicularly and parallel to the faces of EPS products. A graphical interpretation of the models is also presented. Based on the experimental data obtained, it was concluded that the expanded polystyrene was homogeneous in mutually perpendicular planes with respect to its deformability in compression.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
J. S. Horbath, “Concepts for cellular geosynthetics standards with an example for EPS-block geofoam and light weight for roads,” Manhattan Coll. Res. Rep. No. CGT-2001, 4, (October, 2001).
M. Duskov, “Materials research on EPS20 and EPS15 under representative conditions in pavement structures,” Geotextiles Geomembranes, 15, 147–181 (1997).
S. Saarelainen, Mechanical Design of EPS in Frost Insulation and Light weight for Pavements. VVT Building and Transport. Espoo, Finland; seppo.saarelainen@vtt.fi
A. M. Chistyakov, Light weight Multilayer Enclosing Structures [in Russian], Stroyizdat, Moscow (1987).
N. C. Hilyard (ed.), Mechanics of Cellular Plastics, Applied Science Publishers, London (1982).
ASTM. Designation: C.165-95. Standard Test Method for Measuring Compressive Properties of Thermal Insulations.
EN 826:1996 E. Thermal Insulation Products for Buildings. Determination of Compression Behaviour (1996).
EN 13163:2001 E. Thermal Insulation Products for Buildings. Factory-Made Products of Expanded Polystyrene (EPS). Specification. European Committee for Standardization (2001).
Yu. P. Adler, E. V. Markova, and Yu. V. Granovskii, Design of Experiments in Search for Optimum Conditions [in Russian], Nauka, Moscow (1976).
N. Draper and G. Smith, Applied Regression Analysis [Russian translation], Statistika, Moscow (1986).
L. Sachs, Statistical Estimation [Russian translation], Statistika, Moscow (1976).
S. L. Akhnazarova and V. V. Kafarov, Optimization of Experiments in Chemistry and Chemical Technology [in Russian], Vysshaya Shkola, Moscow (1978).
N. Johnson and F. Lyon, Statistics and Design of Experiments in Engineering and Science. Methods of Design of Experiment [Russian translation], Mir, Moscow (1981).
G. F. Lakin, Biometry [in Russian], Vysshaya Shkola, Moscow (1990).
G. N. Bobrovnikov and A. I. Klevanov, Prediction in Controlling the Technological Level and Quality of Production [in Russian], Izdat. Standartov, Moscow (1994).
K. D. Lewis, Methods for Predicting Economics Indicators [Russian translation], Finansy i Statistika, Moscow (1986).
Author information
Authors and Affiliations
Additional information
__________
Translated from Mekhanika Kompozitnykh Materialov, Vol. 43, No. 5, pp. 639–656, September–October, 2007.
Rights and permissions
About this article
Cite this article
Gnip, I.J., Vaitkus, S.I., Kersulis, V.I. et al. Deformability of expanded polystyrene under short-term compression. Mech Compos Mater 43, 433–444 (2007). https://doi.org/10.1007/s11029-007-0041-z
Received:
Issue Date:
DOI: https://doi.org/10.1007/s11029-007-0041-z