Abstract
Thermal properties of control phenol formaldehyde (cpf) adhesive and lignin substituted phenol formaldehyde (lpf) adhesives have been investigated in detail. The effect of varying lignin mass percent of phenol and source of lignin like bagasse, eucalyptus bark, coconut coirpith and coffee bean shell on the thermal stability have been studied using thermogravimetric analysis (TG) and differential scanning calorimetry (DSC). 50 mass% of lignin loading in cpf adhesive shows better bond strength, whereas lignin incorporation up to 25 mass% yields a resin of thermal stability comparable to cpf. Loading of lignin in cpf delays the first thermal transition event. The mass loss in this event was found to increase with increasing lignin content. Lignin source has significant effect on the thermal stability of lpf resins. Rate of curing is enhanced by incorporation of lignin into cpf.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
T. K. Kirk and R. L. Farrell, Ann. Rev. Microbiol., 41 (1987) 465.
T. Holopanen, L. Alvila, J. Rainio and T. T. Pakkkanen, J. Appl. Polym. Sci., 66 (1997) 1183.
K. Rocziak, T. Biernacka and M. Skarzynski, J. Appl. Polym. Sci., 28 (1983) 531.
T. Holopainen, L. Alvila, J. Rainio and T. T. Pakkanen, J. Appl. Polym. Sci., 69 (1998) 2175.
P. C. Muller, S. S. Kelley and W. G. Glassar, J. Adhes., 17 (1984) 185.
J. H. Lora and W. G. Glassar, J. Polym. Environ., 10, 112 (2002) 39.
N. S. Cetin and N. Ozman, Turk. J. Agric. For., 27 (2003) 183.
I. A. T. Razera and E. Frollini, J. Appl. Polym. Sci., 91 (2004) 1077.
F. Marie, Grenier-loustalot, S. Larroque and P. Grenier, Polymer, 37 (1996) 639.
X. M. Wang, B. Riedl, R. L. Geimer and A. W. Christianson, Wood Sci. Technol., 30 (1996) 423.
M. A Khan, S. M. Ashraf and V. P. Malhotra, Int. J. Adhes. Adhes., 24,6 (2004) 485.
M. A Khan and S. M. Ashraf, Ind. J. Chem. Technol., 13 (2006) 347.
G. A. Doering, US Patent, (1993) 5,202,403.
A. D. Barry, W. Peng and L. B. Ried, Holzforschung, 47 (1993) 247.
A. Wenley, A. Alla and T. Brain, Polym. Int., 47 (1999) 89.
P. Benar, R.G. Adilson, M. Dalmo and U. Schuchardt, Bioresour. Technol., 11 (1999) 68.
G. Vazquez, C. Rodriquez, S. Freire, Gonzalez-Alvarez and G. Antorrene, Bioresour. Technol., 70 (1999) 209.
T. Sellers Jr., A. L. Wooten and P. M. Cook, Forest Prod. Res. Soc., Proc., No. 4359, Madison, Wisconsin 1998.
S. Chow, Holzforschung, 26,6 (1972) 229.
V. A. Era and A. J. Matula, J. Thermal Anal., 10 (1976) 461.
A. Siegmann and M. J. Narkis, Appl. Polym. Sci., 21 (1977) 2311.
R. T. Conley, Thermal Stability of Polymers, Marcel Dekker Inc. New York 1970, Chap. 11.
R. T. Conley, J. Appl. Polym. Sci., 9 (1965) 1117.
H. W. Lochte, Strauss and R. T. Conley, J. Appl. Polym. Sci., 9 (1965) 2799.
R. T. Conley and J. F. Bieron, J. Appl. Polym. Sci., 7 (1963) 103.
M. H. Alma and S. S. Kelley, Polym. Degrad. Stab., 68 (2000) 413.
A. W. Christainsen and L. Gollob, J. Appl. Polym. Sci., 30 (1985) 2279.
S. Sarkar and B. Adhikari, J. Adhes. Sci. Technol., 14 (2000) 1179.
D. A. I. Goring, Pulp Paper Mag., Canada, 61 (1960) 544.
D. J. Gardner and T. Sellers Jr., Forest Prod. J., 36,5 (1986) 61.
M. A. Khan, S. M. Ashraf and V. P. Malhotra, J. Appl. Polym. Sci., 92 (2004) 3514.
D. O’Connor and F. D. Blum, J. Appl. Polym. Sci., 33 (1987) 1933.
N. S. Cetin and N. Ozman, Int. J. Adhes. Adhes., 22 (2002) 477.
W. Hoareau, W. G. Trindade, B. Siegmund, A. Castellan and E. Frollini, Polym. Degrad. Stab., 86. (2004) 567.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Khan, M.A., Ashraf, S.M. Studies on thermal characterization of lignin. J Therm Anal Calorim 89, 993–1000 (2007). https://doi.org/10.1007/s10973-004-6844-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10973-004-6844-4