Abstract
Highly stretchable supersensitive sensors represent a new epoch in the field of intelligent medical devices. Applications include the detection of various stimuli of the human body and environmental monitoring around biological surfaces. To provide more accurate measurement results, stretchable sensors must be tightly attached on the skin surface or to clothing. Consequently, stretchable sensors must fulfill many requirements, such as high stretchability, high comfortability, high sensitivity, and long-term wear. To address these challenges, investigators have devoted considerable research effort to the development of technology, and much progress has been achieved. Here, recent developments with stretchable sensors are described, including human motion monitoring sensors, vital sign monitoring sensors, and sensors for environmental monitoring around biological surfaces. The latest successful examples of supersensitive sensors for achieving stretchability by novel materials or structures are reviewed. In the next section, recent advances regarding processing technology innovations are introduced. Future research directions and challenges in developing a highly stretchable supersensitive sensor for wearable biomedical applications are also discussed. With the development of new materials and novel technologies, and given the interdisciplinary nature of the research, the functionalities of stretchable sensors will become more powerful, and stretchable sensor technology will become more mature.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
Introduction
Since their introduction in the early twenty-first century [1], stretchable sensors have attracted substantial attention due to their unique characteristics, such as low modulus, light weight, high flexibility, and stretchability [2]. In addition to these characteristics, stretchable sensors easily flag certain diseases without requiring medical workers to connect to smart devices, thereby not only simplifying diagnostic procedures but also providing health information by monitoring body conditions. Meanwhile, advances in wireless technologies, low-power electronics, and the digital health domain are driving innovations in stretchable sensors for wearable biomedical applications at a tremendous pace. During recent years, stretchable electronic devices for wearable biomedical applications have seen many remarkable achievements, such as the creation of the e-skin [3, 4]. In terms of statistics, the wearable device market reached US$5 billion in 2015 and is predicted to reach US$20.6 billion in 2018.
The main objective of a highly stretchable supersensitive sensor is to measure and quantify physiological signals that are generated by biological activities to provide feedback about physical condition. To carry out its function, a stretchable sensor is generally fixed on the skin surface. Hence, given their nature as interfaces between the skin and the environment, some stretchable sensors also undertake environmental monitoring around a biological surface, such as monitoring the humidity around a wound. The quality of the bio-adhesion between the sensor and skin is the determining factor in achieving signal acquisition results and thus has become a critical issue given that the human epidermal structure is complicated, not flat, and constantly moving.
Generally, electrodes are used to overcome this issue by facilitating attachment to skin via a mechanical clamp, adhesive tape, gel, straps, or penetrating needles. These methods have limitations in terms of comfort, ease of use, long-term wear, and accuracy of health monitoring. Only by possessing the characteristics of high stretchability, flexibility, sensitivity, durability, and fast response/recovery speeds are sensors be suitable for wearable human motion detection, especially for detecting a large range of motion such as that involved in joint movement, which usually results in more than 50% stretchability deformation [5]. However, traditional metallic and semiconducting sensors only withstand very limited stretchability before fracture. Thus, they are not suitable for stretchable applications [6,7,8]. Continued rapid progress with diverse flexible and stretchable substrates [9, 10], novel mechanically durable materials [11,12,13], deformable electrodes and novel processing technology [14,15,16] is promising for the development of stretchable sensors in the near future.
In recent years, the rapid development of new materials and structures [17,18,19,20] has resulted in significant progress in the achievement of highly stretchable supersensitive sensors for wearable biomedical applications. Stretchable sensors have proven to be an important step in achieving a major breakthrough in intelligent healthcare [21, 22]. Highly stretchable supersensitive sensors have been widely used for many wearable biomedical applications, such as human body motion detection [23, 24], human body sign monitoring [25,26,27,28], and environmental monitoring around biological surfaces [29]. Taken a step further, stretchable sensors protect human health in a real-time, safe, and comfortable manner. With the development of materials and processing technology, stretchable sensor technology will become more mature. Undoubtedly, monitoring human health and the environments around biological surfaces will facilitate a healthier lifestyle.
Given the efforts of an increasing number of researchers, there have been many research achievements with stretchable sensors for wearable biomedical applications. The large number of research achievements brings a certain degree of inconvenience for researchers in the process of acquiring relevant information. Several excellent overviews of recent achievements with flexible and stretchable sensors are available [3]. However, a detailed overview of recent progress with highly stretchable supersensitive sensors for wearable biomedical applications has not been reported. Thus, this review focuses on recent developments regarding highly stretchable supersensitive sensors for functional applications and considerations in achieving stretchability. The first section introduces the functions of stretchable sensors, especially recent achievements. In the second section, we review the latest successful examples that have solved the problem of large-range stretchability with technological innovations and material renewal. The third section gives a detailed overview of recent progress regarding processing technology for human activity monitoring and personal health care. Problems and future development trends in the field of stretchable sensors for wearable biomedical applications are discussed in the final section.
Functions of stretchable sensors
To satisfy the requirements of various individuals, the functions of stretchable sensors have gradually trended toward diversification, including body temperature detection [30], heart rate monitoring [31], and muscle movement monitoring [32]. These functions help people fully understand their own physical condition in real time and identify the initial symptoms of diseases in a timely manner to avoid missing optimal treatment windows. In this paper, the functions of stretchable sensors are divided into three categories: human body motion detection, vital sign monitoring, and environmental monitoring around biological surfaces (Fig. 1). Table 1 provides a list of several stretchable sensors attached or laminated to various positions of the human body, along with their corresponding monitored electrophysiological activity and acute physiological responses to improve our understanding of physical condition.
Stretchable sensors for human body motion detection
Movement is an essential part of people’s daily lives. However, some bad habits have a substantial influence on health. For example, smartphones provide a new approach to studying and entertainment. However, their use has resulted in a high incidence of phubbing, which is a type of spinal cord injury. There is no doubt that human health will improve if such problems are solved properly, and stretchable sensors provide a ray of hope. Moreover, as their application evolves, stretchable sensors will provide people with more quality products and better services.
The measurement mechanism used by stretchable sensors for movement monitoring is based on changes in voltage/current/resistance upon stretching, as shown in Fig. 2. In the context of people’s daily lives, movements are classified into two categories: large-scale motions, which include bending movements of the joints, waist and spine [40], and small-scale motions, which include subtle movements of the face, chest, and neck during emotional expression, swallowing, and speaking. Aiming to monitor motions with different scales, the requirements of stretchable sensors change as different scales of strain are detected. In contrast to large-scale-motion monitoring sensors, small-scale-motion monitoring sensors not only must have sufficiently high sensitivity to detect variations in strain of a few percentage points or less but also must be stretchable to make conformal contact with the skin with high signal quality. Lan Liu fabricated a graphene/silver nanoparticle (NP) synergic sensor with extremely high sensitivity and a detection limit of 0.5%. To solve the problem arising from the addition of rigid fillers into the matrix, which leads to an increase in the stiffness of the composite [41], this sensor employed a sandwich structure that contains two conductive layers on the top and bottom and graphene/sliver nanoparticle/thermoplastic polyurethane as an insulating layer in the middle, ensuring both initial conductivity and stretchability. This sensor accurately captures extremely small strain from muscle motion during speech, and the relative resistance change is presented in Fig. 2b. Lee [35] made progress on a small-strain sensor that detects small strains on the skin of a human face that are induced by the minute movements of muscles related to facial expressions in response to emotions and eyeball movements (Fig. 2c). Experiment showed that the stability of sensor responses was primarily affected by single-wall carbon nanotubes (SWNCTs), and the sensitivity of the stacked nanohybrid strain sensor was primarily determined by the formation of electrical junctions between SWNCTs and PEDOT phases in the polyurethane-poly(3,4-ethylenedioxythiophene) polystyrenesulfonate (PU-PEDOT:PSS) composite. Hence, the PU-PEDOT:PSS (bottom)/SWNCT/PU-PEDOT:PSS (top) structure was selected to guarantee the high sensitivity and stability of the sensor.
For large-scale movement monitoring sensors, large-scale stretchability, and fast response/recovery speeds are expected. Some remarkable sensors with large-scale stretchability were developed by exploring new materials and novel technologies [42]. Gao [8] fabricated a large-scale strain sensor that easily records and discriminates various knee-related motions, including knee flexing/extending, walking, jogging, jumping, and squatting-jumping, by virtue of the distinctly differentiated patterns of response curves (Fig. 2d, e). However, attaining the combination of high sensitivity to tiny deformations and broad sensing range is a large obstacle. Stretchable sensors have overcome this obstacle through technical progress. Yamada [42] introduced a new type of stretchable electric nanomaterial that consists of aligned single-walled carbon nanotube thin film that deforms when stretched in a manner that is similar to the structural deformation of string cheese when peeled. This stretchable sensor is used not only to precisely monitor large-scale and rapid human motion (Fig. 2f) but also to detect typing and phonation (Fig. 2g). Such progress facilitates the fabrication of a stretchable sensor that realizes the detection of a full range of human activities, from single functions to complex human body movements that involve tensile strain, bending, and twisting. Meanwhile, stretchable sensors for human body motion detection are undergoing constant improvement. The functions of stretchable sensors for human body motion detection play an important role in diagnosing damaged vocal cords, monitoring Parkinson’s disease, determining the degree of change in spinal posture, analyzing facial expression changes, and detecting posture and movement.
Meanwhile, some wearable biomedical sensors about tracking patients with Parkinson’s, epilepsy as well as detecting sudden falls have acquired some outstanding achievements. Son [56] developed a wearable sensor for the Parkinson’s (Fig. 3a–c); this device can measure tremors using silicon nanomembrane strain sensors when Parkinson’s disease patient wears the current multifunctional devices. And then the tremors data will be analyzed and categorized into specific disease mode, and the corresponding feedback therapy, namely drug delivery from mesoporous-silica nanoparticles will proceed transdermally at optimized rates through thermal stimuli (heater). The skin temperature will be simultaneously monitored (temperature sensor) to prevent skin burns during thermal control of the drug delivery rate. Burns [177] used triaxial accelerometer-based fall sensor can accurately sense the movement of the patient’s hands and feet. The specially developed quantitative evaluation algorithm analyzes the severity of the symptoms such as tremor and bradykinesia in real time. It is said that the biggest feature of Parkinson’s disease is the appearance of gait and movement disorders. People will experience dizziness, inability to walk normally, and changes in speech sounds, and these characterizations can be received by sensors such as gyroscopes. So it is very suitable for detection with wearable devices.
Guan [178] used the principle of short-chain IL species, and small fiber gaps/liquid volume could yield stretchable liquid bridges with stable TCL, making a wearable stretchable sensors by the way of stretchable conductors attached to curved, textured surfaces of human body and in clothes for strains of muscles and skins to monitor the muscle movement driven (Fig. 3d–f). Sungmook [179] showed wearable fall detector using integrated sensors and energy devices (Fig. 3g–i); this device improves stretchable energy harvesting and storage units based on requirement of integrated systems. The integrated system successfully detects a fall from normal daily motions and sends an immediate alarm wirelessly. Xie [180] reported a wireless ECoG recording system with a flexible and biocompatible electrode device with an array of 32-microelectrodes (Fig. 3j). Based on some epilepsy treatment experiments, ECoG system can record brain activity and perform electric stimulation wirelessly, demonstrating its potential for broad applications.
Stretchable sensors for vital sign monitoring
Vital signs are crucial parameters for evaluating human health [43]. Consider the example of temperature: abnormal body temperature indicates that some system of human body is work improperly because of increased heart burden, physical overdraft, loss of consciousness, and other reasons. Therefore, it is essential to establish an effective system for vital sign monitoring to provide timely information to a doctor and avoid sudden incidents. It is well known that the optimal cure times for various diseases are different, representing a great challenge in the practice of traditional medicine. For example, the optimal rescue time for heart disease patients is 4–6 min. If a patient does not receive treatment within 1 h, they will face serious hazards. However, despite the urgent need, there remains a significant challenge in providing treatment to patients within the confines of traditional medical practice in such a short period of time. Fortunately, stretchable sensors for vital sign monitoring are easily worn by patients for long-term monitoring while remaining comfortable and maintaining high accuracy in real time. In addition, elderly people suffer from a high incidence of disease but dislike medical equipment with complex operations. Stretchable sensors, which are characterized by their simplicity of use, are highly suitable for elderly people. The major monitoring objects of stretchable sensors are body temperature, heart rate, respiration rate, blood pressure, pulse oxygenation, and blood glucose [44]. Vital signs do not include pulse oxygenation and blood glucose, but these parameters are widely used in medical diagnosis. Therefore, pulse oxygenation and blood glucose will also be discussed in this section.
Temperature
Temperature, the first vital sign, provides important information about human health. Flexible and stretchable temperature-monitoring sensors are attracting increased attention for biomedical applications because they provide real-time monitoring in a comfortable manner on wrinkled and stretchable skin. Usually, body temperature is measured via pyroelectric temperature detectors [45], resistive temperature detectors (RTD) [46], and thermistors temperature detectors [47], which are shown in Fig. 4. The measurement mechanism of pyroelectric temperature detectors is as follows: two different components of the conductor are inserted into the circuit at both ends of the circuit, and electromotive force is produced in the loop when their temperatures at the joint point are different. This electromotive force, which is called the thermoelectric potential, along with generated thermoelectricity is used to measure the temperature. Making use of this measurement mechanism, pyroelectric devices with a metal/insulator/metal (MIM) structure based on poly(vinylidene fluoride) (PVDF) or poly(vinylidenefluoride-co-trifluoroethylene) (P(VDF-TrFE)) have been developed in recent decades. However, these devices are fabricated on rigid substrates and thus do not meet the requirements for a high degree of comfort. Sang-Woo Kim [45] fabricated a highly stretchable hybrid nanogenerator that includes three layers: PDMS-CNT acts as the bottom electrode, P(VDF-TrFE) as the piezoelectric and pyroelectric material, and graphene as the top electrode (Fig. 4a). The hybrid device is designed with a microline patterning architecture to increase the flexibility, stretchability, stability, durability, and robustness of the pyroelectric temperature detectors. The materials and structure that are used to construct the pyroelectric temperature sensor to avoid the metal electrodes have very low stretchability/flexibility. The working mechanism was discussed in which a heating process is applied to the device, thereby leading to decreases in the electric dipoles and voltage (Fig. 4c–e). The remarkable robustness of this device, even after stretching, is demonstrated by the experimental results (Fig. 4f).
The RTD senses the change in electrical resistance of the conductive metal as the temperature changes. Several common pure metal materials are applied during the construction of the RTD, including copper, platinum, and nickel [46]. John A. Roger [46] introduced a precision RTD with an ultra-thin, compliant, skin-like array, which is pliably laminated onto the epidermis to provide continuous, accurate thermal characterizations. This device is mounted directly onto the skin and follows skin deformations. High flexibility and stretchability are essential features of this device. To achieve these features, Cr and Au, with thicknesses of 5 nm and 50 nm, respectively, were selected together as the resistive material of the noninvasive RTD sensor. The resistive material was designed as a filamentary serpentine mesh to improve flexibility and stretchability (Fig. 4g, h). The precision of this device was explored by comparing different numbers of devices. Experimental results show that when the number of devices was 222 and 50, the corresponding precision was 12 Mk and 8 Mk, respectively, demonstrating that the precision of this device was dependent on the number of devices. A 4 × 4 RTD sensor array was applied on the palm to explore the relationship between the distribution of skin temperature of the human body and mental/physical stimuli (Fig. 4i). Figure 4j, k shows the variations in skin temperature during the application of mental and physical stimuli. Based on Fig. 4j, k, the results obtained with this device are nearly identical to the averaged data from a neighboring region in the infrared image. The results proved that an RTD sensor array with high precision and mapping capability was capable of monitoring of cardiovascular health, cognitive state, malignancy, and many other important aspects of human physiology.
The thermistor temperature detector is similar to RTD: the sensing mechanism of the thermistor is also based on the change in the electrical resistance of the sensing material with temperature. However, a thermistor is a semiconductor material, which usually has a negative temperature coefficient; that is to say, the resistance decreases with increasing temperature. Lee [47] fabricated a stretchable graphene thermistor temperature sensor using a lithographic filtration method. Three-dimensional (3D) crumpled graphene was used for the thermal detection channels, and highly conductive silver nanowires were used as electrodes (Fig. 4l, m). To achieve stretchability, all electrodes and detection channels with serpentine were fully embedded inside a polydimethylsiloxane (PDMS) matrix, and this device maintained thermal sensing properties when the stretchable strain reached 50% (Fig. 4n). In addition, the stretchable sensors demonstrated mechanical robustness and strain-dependent resistance (Fig. 4o–q). Nickel oxide and nickel microparticles also have been demonstrated to qualify as thermistor materials [48].
In summary, flexible and stretchable body temperature sensors have been investigated by researchers all over the world, and many achievements have been made in this field. Undeniably, certain urgent problems remain to be solved to meet the requirements of high accuracy and timeliness for body temperature monitoring. These problems include the response and relaxation times of pyroelectric temperature detectors, the large-scale stretchability of the RTD, and the strain dependence of thermistor temperature detectors. In addition to temperature sensors used for the three applications described methods, there are other temperature sensors with high sensitivity, such as the diode temperature sensor and the polar groups of the dielectric-induced charge-trapping temperature sensor [49].
Body temperature sensors are usually positioned on the arm and chest. Hence, there is a gap between the recorded temperature and the body-core temperature because body surface temperature changes with the temperature of the environment. For example, the body-core temperature is approximately 37 °C under normal conditions, while the body surface temperature is only 32 °C in a room with a temperature of 25 °C. Therefore, in the field of temperature research, measurement and monitoring of body-core temperature are prioritized. Rogers [28] proposed a method based on a theoretical approach together with a modeling algorithm, yielding a core body temperature from multiple differential measurements from temperature sensors that are separated by different effective distances from the skin. This method greatly contributes to the determination of body-core temperature using flexible sensors and provides potential future research areas.
Heart rate
Heart rate (HR) or pulse is defined as the frequency of the cardiac cycle and is expressed in beats per minute (b.p.m.). HR is a necessary item in physical examinations, and its importance is self-evident because abnormal HR indicates that something is wrong with the human body, such as heart disease or myocardial infarction. Therefore, there is an urgent need to fabricate a wearable heart monitoring sensor that monitors HR accurately and in a timely manner. The measurement part of a stretchable sensor is normally fixed on the radial artery at the wrist or carotid artery at the neck or chest. Electrocardiography (ECG) [50,51,52,53], a conventional method for measuring HR, has been applied widely. As a key bio-signal, ECG requires constant monitoring via a connection with a bioelectrode that consists of a durable skin adhesive and a stretchable circuit [54,55,56]. In general, the bioelectrode that is connected to the ECG device to monitor HR is a gel-type silver/silver chloride (Ag/AgCl) electrode. While Ag/AgCl electrodes have been widely used, their use has been limited by skin irritations such as itching or erythema. Moreover, people only feel comfortable with human motion in daily life at a bioelectrode deformation of less than 30% [42]. Hence, the Ag/AgCl electrode does not satisfy the requirements for long-term wear. The Ag/AgCl electrode also dries over time, resulting in a sharp drop in signal quality. To overcome this problem, Jeon [57] fabricated a single stretchable and conductive dry adhesive to replace the Ag/AgCl electrode, which combines a gecko-inspired hierarchical structure and an elastomeric carbon nanocomposite. The conductive dry adhesive pad also employs gecko-inspired structures that consist of micro- and nanopillars (Fig. 5a) to repeatedly adhere to and detach from the rough surface of human skin (Fig. 5b). Then, a 1D–2D carbon hybrid filler system is introduced to enhance the electrical percolation. Figure 4c shows that the conductive dry adhesive pad is highly stretchable and bendable due to the conductive elastomer, which is composed of carbon nanofillers and PDMS. Unlike the conventional ECG electrode, this electrode is self-cleaning, which makes it semipermanently reusable by simply washing off the dust on its surface without pattern damage. Figure 5d–f shows the obtained ECG signals under different conditions and movement states using this electrode to connect to the ECG device. Lee [58] fabricated a carbon nanotube (CNT)/polydimethylsiloxane (PDMS) composite-based dry ECG electrode that is readily connected to conventional ECG devices and demonstrated its long-term wearable monitoring capability. The effects of the mixing ratio of CNT and PDMS, diameter and thickness were investigated to achieve CNT/PDMS prepolymer dispersion with excellent properties. This group demonstrated that a larger electrode measured ECG signals better than a smaller electrode. Unlike the significant effects of CNT wt% and diameter, the effects of thickness were low, which is consistent with the conductivity tests (Fig. 5f). In addition to the CNT/PDMS composite-based dry ECG electrode, other similar wearable ECG configurations have been used with flexible capacitive electrodes [59], metal ink electrodes [53], and embroidered textile electrodes to solve the problems of the gel-type Ag/AgCl electrode in terms of skin irritation and inaccuracy after drying.
In the above ECG monitoring system, the sensors are only flexible and stretchable in the electrode section, and flexibility and stretchability of the entire system is not achieved. Due to great advances in flexible and stretchable materials and technology, an ECG monitoring system with flexibility and stretchability has been successfully developed. Rogers [60] fabricated an ECG system composed of electrodes, circuits, and radios for wireless communication in a soft microfluidic assembly. This complete ECG system consists of a novel structure in which all components are connected by serpentine-shaped metal (Fig. 6d) and suspended in the surrounding fluid. Due to this structure, the complete system is flexible and stretchable (Fig. 6a–c). This device measured the ECG signal that is shown in Fig. 6e, f.
Plethysmography is another effective method for monitoring HR and has the advantages of simplicity, reliability, and low cost. Plethysmography methods include photoplethysmography (PPG) [61] and the piezoelectric effect [62]. The principle of PPG is to optically detect changes in the blood flow volume in the microvascular bed of tissue via reflection from or transmission through the tissue. Techniques for PPG require hard photoelectric modules, which are tightly attached to the skin, e.g., on the fingers, with a specified penetration depth. For reasons that are stated above, this HR monitoring system is not appropriate for long-term ordinary daily use due to the inconvenience of the user experience, especially at night. Some researchers revealed that the principle of plethysmography applies equally well to stretchable pressure sensors [62]. The principle underlying the use of pressure sensors to monitor HR is that the pressure sensor records the waveform of blood pressure when it is attached on the radial artery or carotid artery, and HR is calculated from the number of signal periods. Unlike PPG, a hard photoelectric module is not essential for pressure sensors. Pressure sensors are tightly attached to the skin in a flexible and stretchable manner for HR monitoring. Bao [62] used a pressure-sensitive polymer transistor as a stretchable pressure sensor to continuously monitor the radial artery pulse wave (Fig. 7a–c). The HR is determined from the calculated pulse waveform. Similarly, Pan [63] presented a novel droplet-based pressure sensor that uses elastic and capacitive electrode–electrolyte interfaces to record the blood pressure wave of the carotid artery under the application of a gentle contact force (Fig. 7d, e). In addition to recording the blood pressure waveform, the pressure sensor is attached to the chest to record the pressure waveform of the heartbeat. Sun [8] developed a graphene-based composite fiber with a “compression spring” architecture to capture the heart beat signal (Fig. 7f, h).
Respiration rate
Respiration is defined as the process of gas exchange between the body and the external environment. During the process of respiration, oxygen is inhaled and carbon dioxide is released. The optimum frequency of respiration of an adult is approximately 6.4 s during relaxation. The respiration rate during exercise is accelerated to a variable extent, and the respiration intensity is increased compared the respiration rate during relaxation. An abnormal respiration rate may indicate that the human body is sickened by respiratory disease, coronary heart disease, myocarditis, or pericarditis. The sensors are placed next to the nose or mouth to detect the respiratory airflow signal. Then, the respiration rate is determined based on changes in air temperature, humidity, airflow pressure, or carbon dioxide concentration during respiration [64, 65]. Li [64] used a stretchable humidity sensor that is based on a large-area polycrystalline few-layer WS2 film, which was synthesized by metal sulfurization, to monitor human respiration in real time. This device efficiently followed relatively fast (~ 1 s) or slow (∼ 5 s) breathing (Fig. 8b), which suggests its potential application for mask-free monitoring of the respiration rate. Ko [66] designed flexible electronic skins that are based on composite elastomer films that contain interlocked microdome arrays and display very large tunneling piezoresistance (Fig. 8c). This electronic device, which demonstrates high sensitivity to pressure, sensitively monitors airflow pressure during breathing. Figure 8d shows that this electronic device was attached to the front of the nostrils, and periodic breathing generated reliable and stable changes in resistance (Fig. 8e). Although these sensors accurately measure respiration rate when placed near the nose and mouth, they are limited by being conspicuous and less comfortable. In general, few people are willing to use these sensors to monitor their respiration rate for a long period of time.
To investigate a comfortable method to monitor respiration rate, researchers focused the placement of the sensor on the torso rather than the face. An important feature of respiration is the expansion and contraction of the chest and abdomen (Fig. 9a) [67, 68], which provides a means for the change in volume to be transduced into an electrical signal. Based on the periodic deformations of the chest wall during the physiological movements of respiration, Khine [69] presented a wrinkled platinum strain sensor with tunable strain sensitivity (Fig. 9b). The possibility of using such a sensor for real-time respiratory monitoring by measuring chest wall displacement and correlating it with lung volume has been demonstrated (Fig. 9c, d). Wang [70] reported a new membrane-based triboelectric sensor (M-TES) as a self-powered approach. This sensor generates a voltage that is induced by surface triboelectric charges in response to air pressure changes. This system, which includes a wireless security system, is built by integrating an M-TES, an air bag, and a processing circuit (Fig. 9e). The air bag is placed on the abdomen. The M-TES checks the air pressure change in the air that follows the expansion and contraction of the abdomen and obtains respiration rate signals in real time, as shown in Fig. 8f, g. Wang [71] fabricated a belt that embedded a stretchable conductive polypyrrole/polyurethane (PPy/PU) elastomer. The conductivity of this elastomer changes when stretched. Abdominal expansion and contraction during respiratory activity results in PPy/PU elastomer elongation. When being stretched, the conductivity of this elastomer changes. Hence, the respiration rate is determined from the resistive change waveform. The elongation and sensitivity of the waistband-like human breath detection sensor are shown in Fig. 8i. In addition to volume changes of the chest or abdomen, changes in the trachea during respiration have attracted attention. Lee [72] developed a new type of transparent, stretchable, and ultrasensitive strain sensor that is based on a AgNW/PEDOT:PSS/PU nanocomposite. This sensor is placed on the neck to detect changes in the trachea (Fig. 9j). There were significant differences between the signals that were generated during inhalation and exhalation, as shown in Fig. 9k. These sensors are attached on the body directly. Hence, the comfort of the wearable device is crucially important for users.
Based on the volume changes in the chest and abdomen during breathing, many respiration rate sensors take advantage of conductive textile technology to build the sensing elements directly into the textile. Kennon [73] used a textile-based strain sensor to create a respiration belt. This device was realized by bringing together a knitted sensor and a relatively inelastic textile strap. As the textile is stretched, the contact area between the conductive fibers is reduced, and the resistance increases. Figure 10a shows knitted loops of conductive fibers and highlights the contact areas, and Fig. 10b shows a belt that contains the resistive sensor. The changes in resistance during respiration are shown in Fig. 10c. Zhu [23] fabricated electronic skin, which was constructed from graphene woven fabrics, PDMS, and medical tape. This device, which is highly sensitive, detects weak respiratory activity (Fig. 10d). Moreover, the device is sufficiently wearable and biomedically compatible for placement inside clothing around human skin without causing any irritation. Guo [74] designed a garment-based sensing system for the long-term monitoring of breathing rhythm (Fig. 10e). To overcome posture artifacts, this garment was integrated with two piezoresistive sensors placed on two different moving parts of the body. Figure 10f shows the respiration waveform. Tao [75] fabricated notched POF fabric strain sensors and integrated them into a belt for respiration monitoring (Fig. 10g). Min [67] proposed a simplified structural textile capacitive respiration sensor for a respiration monitoring system, which was composed of conductive textile and polyester (Fig. 10h, i). Figure 10j shows the experimental setup. During the monitoring process, respiration rate is determined by the distance changes between two textile plates in the TCRS, which measures the force from abdominal diameter changes with respiratory movement. The obtained breathing signals are shown in Fig. 10k. This textile sensor achieves excellent performance for monitoring respiration rate. However, some problems persist, such as cleaning methods and manufacturing for different people. However, we believe that these problems will be properly addressed in the future.
Blood pressure
Blood pressure is one of the most important health indices of the human body. The normal range for systolic pressure is between 90 and 140 mmHg, and the normal range for diastolic pressure is between 60 and 90 mmHg. Blood pressure is inherently variable, and ambulatory measurement of blood pressure is the best way to predict clinical outcomes, especially during the night. Sphygmomanometers cannot be carried by people. Thus, they do not meet the requirements for ambulatory measurement. A pressure sensor is placed on the artery via the finger to measure the blood pressure, and the measurement result is displayed as a waveform. Peak and trough values correspond to systolic and diastolic pressures, respectively. Another function of the complete pulse pressure waveform of blood pressure is that it provides valuable information for the diagnostics and therapy of cardiovascular diseases such as arteriosclerosis, hypertension, and left ventricular systolic dysfunction [76, 77]. A sensor with high stretchability is necessary since it will be deformed and wrinkled with the skin. Many breakthroughs have been made regarding highly stretchable sensors for monitoring blood pressure with ease, and new milestones are reached as new materials are developed. Some achievements have been made with high-sensitivity capacitive [77], piezoelectric [78], and piezoresistive [79] sensors. For capacitive pressure sensors, compressible capacitive strain sensors are constructed by sandwiching a robust dielectric material between two flexible electrodes. When the dielectric is compressed from externally applied pressure, the capacitance of the device changes accordingly. Sang Ouk Kim fabricated a capacitive pressure sensor with a thin, stretchable, and skin-conformal sensor array, in which microtopography-guided, graphene-based, conductive patterns are embedded without any complicated processes [38]. This sensor is capable of creating an intimate relationship between the rough skin and the device via a structure-assisted approach (Fig. 11a). The measured pulse pressure waveform is shown in Fig. 11b. When pressure is applied to the piezoelectric material, the voltage signal changes. This sensing mechanism is in line with the development and utilization of the pressure sensor. Based on this mechanism, Rogers [80] presented a noninvasive sensor for measuring subtle changes in arterial pressure. This sensor consists of PZT and MOSFET. The piezoelectric voltage response of the PZT is converted to a current output via capacitance coupling. Figure 11e–g shows the measured position and pulse pressure waveform. Choong [81] fabricated a novel stretchable resistive pressure sensor. To enhance the pressure sensitivity, this sensor employs micro-pyramid PDMS arrays with spring-like compressible platforms that are deposited to form a base for a conductive electrode, which has a sensitivity of up to 10.3 kPa−1. This sensor is attached on the radial artery to demonstrate its bio-monitoring capabilities, and a monitored blood pressure waveform is shown in Fig. 11g, h.
Pulse oxygenation
Oxygen saturation is the percentage of oxygen-bound oxygenated hemoglobin in the blood relative to the total amount of hemoglobin. In other words, oxygen saturation is the concentration of blood oxygen in the blood, which is an important physiological parameter of the respiratory cycle. In a healthy adult, pulse oxygenation should be maintained at 98%, and vein oxygenation should be maintained at 75%. Abnormal oxygen saturation is one important factor that hinders proper organ function. Therefore, monitoring oxygen saturation is important for protecting human health. Using two different wavelengths of LED lights as the incident light source, the intensity of the light through the tissue bed is measured to calculate the oxygen saturation. In general, the sensors are mounted on the finger, earlobe, forehead, or wrist. Conventional pulse oximeters are limited by their bulk, rigidity, and area-scaling complexity. Ana C. Arias introduced a pulse oximeter sensor that is composed of organic LEDs (OLEDs) and a flexible organic polymer photodiode (OPD) [82] (Fig. 12). Unlike commercially available inorganic oximetry sensors, this device uses red (532 nm) and green (626 nm) organic light-emitting diodes. The main reason for this is that oxy-hemoglobin and deoxy-hemoglobin have different absorptivities at red and green wavelengths (Fig. 12c). Moreover, green OLEDs overcome the disadvantages of instability and lower overall efficiencies of near-infrared OLEDs. These results demonstrate the use of organic sensors to measure pulse rate and oxygenation with high accuracy.
Blood glucose
The rising incidence of diabetes all over the world is attributed to unhealthy lifestyles. Daily glucose monitoring in diabetes is vital for maintaining health and quality of life. Blood glucose is determined by the glucose levels in the blood. The traditional blood glucose measurement method causes substantial distress to diabetics because of painful blood sampling from the fingertip. Moreover, blood glucose is inherently variable, and a difference between fasting and postprandial levels is observed. Therefore, there is an urgent need to fabricate a noninvasive stretchable sensor that is capable of monitoring variations in blood glucose in real time. Available noninvasive glucose sensors main rely on optical, spectroscopic, ultrasound, heat, electrical, or electrochemical techniques [83]. Among these, electrochemical techniques have been shown to possess great potential for monitoring blood glucose. Wang [84] presented a proof-of-concept demonstration of an all-printed temporary-tattoo-based glucose sensor for noninvasive glycemic monitoring. The tattoo-based platform for noninvasive glucose sensing is composed of tattoo-based paper, Ag/AgCl electrodes, Prussian Blue electrodes, a transparent insulating layer and hydrogel (Fig. 13a). The stretchability and flexibility of this sensor are the same as those of the tattoo (Fig. 13b). To measure glucose levels, reverse iontophoresis is performed, which involves applying a mild current to the epidermis, thereby causing ions to transport interstitial glucose from the skin to the electrodes. Then, ISF glucose is detected via an enzymatic electrochemical glucose sensor (Fig. 13c). Based on this approach, post-meal and pre-meal blood glucose measurements are obtained, as shown in Fig. 12d. Seo [85] fabricated a flexible glucose sensor using a CVD-grown graphene-based field-effect transistor (FET). The function of CVD-grown graphene is to immobilize the enzymes that induce the catalytic response of glucose. Glucose sensing is achieved through that reaction, which produces gluconic acid and H2O2. Then, H2O2 reacts with the graphene channel of the FET, thereby changing its conductance (Fig. 13e), which results in the shifting of the Dirac point of the graphene. Although glucose oxidase has made substantial achievements as an enzyme-based electrochemical sensor, the long-term stability of the enzyme has always been a challenge. To solve this problem, Pak [86] presented a CVD graphene FET enzymatic glucose biosensor that utilizes silk protein as both a device substrate and for enzyme immobilization (Fig. 13f, g). The CVD graphene FET structure is built by depositing Au/Ti (500 nm/100 nm) at the two opposite ends of the graphene channel to fabricate source (S) and drain (D) electrodes. The glucose oxidase (GOx) enzyme is attached to the graphene channels on the silk substrates. The subsequent reaction is the same as that described in the above example. There are also certain methods for maintaining enzyme stability; these include covalent attachment to sensing surfaces [87] and physical entrapment in a porous material matrix [88]. However, although these methods improve enzyme stability to some extent, there is a long way to go before solving this problem completely.
In addition to sensors that are attached to the skin, Liao [89] fabricated an enzyme sensor that directly accesses tear fluid to monitor glucose levels. Wireless health monitoring is achieved using an active contact lens. This system includes a glucose sensor, an antenna, a communication interface, and readout circuitry on a polymer lens substrate. The glucose sensor is composed of working, counter and reference electrodes. The working and counter electrodes are fabricated as concentric rings (Fig. 13h), and the Ti/Pd/Pt reference electrode is obtained by evaporation. The exposed Ti/Pd/Pt sensor surface is used to immobilize GOD, and it is handled with a GOD/titania sol–gel membrane. To prevent the interference of ascorbic acid, lactate, and urea, Nafion is applied to promote random protein absorption [90]. The glucose level is measured based on the current that is generated in the glucose solution when the working and reference electrodes apply a voltage, and the measurement result is shown in Fig. 13i.
Stretchable sensor for environmental monitoring around a biological surface
As an interface between the environment and the body, stretchable sensors analyze the surface environment and offer constructive guidance to maintain people in a healthy condition. Due to the joint efforts of certain researchers, many studies have obtained results on wearable medical devices that contribute to healthier lives, such as a stretchable gas sensor [91,92,93,94] and a stretchable humidity sensor [29, 64, 95]. The stretchable gas sensor has two functions: to monitor harmful gasses in the environment and avoid injuries inflicted by noxious gasses to humans, especially colorless and tasteless harmful gasses, and to detect the gas content of the body, which will help people fully understand their health. The gas sensor absorbs gas molecules, leading to changes in its electrical conductivity, which are attributed to changes in the local carrier concentration that is induced by the surface adsorbates. Different materials have different electrical conductivities and surface functional groups, which are utilized by a gas-sensing mechanism for gas detection. Before the development of nanotechnology, gas sensors suffered from problems with long-term stability and limited measurement. With the development of nanotechnology, especially the appearance of graphene, gas sensors have made many critical breakthroughs, such as ultra-high sensitivity at extremely low concentrations, high specificity, fast response and recovery, low power consumption, room-temperature operation, and good reversibility, by employing novel nanostructures as sensing elements. Hyung-Kun Lee fabricated bendable and washable electronic textile gas sensors with high mechanical strength, flexibility, and fast response, which are composed of reduced graphene oxides using commercially available yarn and molecular glue through electrostatic self-assembly [93]. Sun [94] fabricated a transparent chemical gas sensor with highly sensitivity. This device is assembled from a transparent conducting film of hierarchically nanostructured polyaniline (PANI) networks, which are fabricated on a flexible PET substrate by coating silver nanowires (AgNWs), followed by the in situ polymerization of aniline near the sacrificial AgNW template. This sensor provides a potential method to detect disease using exhaled breath samples [96]. At present, diseases that are detected from breath samples include cancer, multiple sclerosis, Parkinson’s disease, tuberculosis, and diabetes. However, some techniques for detecting volatile organic compounds in exhaled breath, such as gas chromatography [97], mass chromatography [98], ion mobility spectrometry [99], and selected ion flow tube mass spectrometry [100], are not widely used due to the large size of the required equipment, the complexity of operation and the high cost. A stretchable gas sensor that is comfortable and easy to use has gradually emerged. Detecting exhaled breath using a gas sensor involves a complex multistep process [101]. Figure 14a shows the process for breath testing. The process includes sample collection, measurement, and data analysis. IL-Doo Kim [102] fabricated a gas sensor for detecting exhaled breath that has a superior detection capacity and an appreciable response. Due to the morphological characteristics of dense and porous SnO2 fibers, this sensor significantly increases the accessibility of all sensing layers to exhaled breath gas (Fig. 14b, c). In addition, catalytic Pt NP decoration enhances the sensor’s ability to sense acetone and toluene in exhaled breath. Figure 14d shows the detection results.
Stretchable humidity sensors are typically used to determine the amount of water vapor that is present in a gas or mixture of gases. Such sensors have been increasingly applied in the environmental control and medical fields. For example, a humidity sensor that is used to monitor the moisture level on a wound would also provide information on wound healing [103, 104]. In the past several years, stretchable humidity sensors, which were crippled by difficulties associated with performance (e.g., in terms of responsivity, response time, relaxation time, and stability) and materials, have not demonstrated outstanding achievements. To address these problems, several transduction mechanisms, such as a humidity-sensitive resistor [105, 106] and a humidity-sensitive capacitor [107], have been explored to improve the performance of stretchable humidity sensors. The humidity-sensitive resistor contains polyelectrolytes that respond to water vapor variations by changing their resistivity, while the humidity-sensitive capacitor senses variations in the dielectric constant of the polymer dielectrics and, therefore, changes in capacitance. Many different properties were explored as outputs, such as optical and electrical characteristics (resistance, capacitance, the gate effect in field-effect transistors, and small mass changes). Similarly, to improve the performance of stretchable humidity sensors, numerous materials have been employed as active components, such as carbon-based materials, polymers and composites. Stretchable humidity sensors have already demonstrated some achievements by positively exploiting the transduction mechanism and materials. Chun Li presented an e-skin-compatible resistor humidity sensor that is based on a large-area polycrystalline few-layer WS2 film, which is synthesized by metal sulfurization [64]. The water molecules that are adsorbed onto the WS2 induce changes in concavity; then, the resistor also changes. Meanwhile, patterned graphene was used for the electrodes, and a thinner PDMS membrane was used as a substrate to obtain the stretchable sensor. This sensor not only has a rapid response time of a few seconds but also a sensitivity of up to 2357 (for 90% humidity). Bi [107] fabricated a microscale capacitive humidity sensor that uses graphene oxide (GO) films as humidity-sensing materials. Water molecules are attached to the surface of the GO film via double hydrogen bonding to form a physical adsorption layer of water. The hopping transfer of protons between adjacent hydroxyl groups in the physical adsorption layer of water requires substantial energy due to the strength of double hydrogen bonding. In this scenario, GO films exhibit strong electrical resistance. The protons in GO films are minimal in quantity and restricted by discontinuous mobile layers. These characteristics are crucial for leak conduction, which essentially increases the capacitance at low RH.
Design considerations for stretchable sensors
Stretchable sensors are mainly placed on non-planar skin or clothing. Due to the unevenness, a stretchable sensor must satisfy many requirements, such as ultra-thinness, low modulus, high transparency, high durability, light weight, high flexibility, and high stretchability. Among these requirements, stretchability is a crucial factor in monitoring human body motion (especially large-scale body motion), the environment, and vital signs. Researchers have done substantial work with stretchable sensors and made some achievements in terms of materials and strategies. The following section will discuss some of the materials and strategies that are frequently used to satisfy these requirements.
Materials
To achieve a highly stretchable supersensitive sensor for wearable biomedical applications, the choice of materials is critical. Technological advancements in stretchable sensors have been made largely via the development of new materials for the fabrication of stretchable devices. Generally, the materials that are used to fabricate stretchable sensors fall into three categories according to the function of the stretchable sensor: substrate materials, nanocomposite materials, and liquid metal materials. Below, several of the most commonly used materials for the fabrication of stretchable sensors are investigated.
Materials for flexible substrates
Substrates play an important role in stretchable sensors because the stretchability of the vast majority of sensors is achieved by embedding, depositing, and printing the conductive material and the substrate. For stretchable materials, adhesion and radius of curvature are regarded as the most important factors. Various materials are used for stretchable sensors. Polydimethylsiloxane (PDMS) [64, 108,109,110] has been widely applied for the fabrication of stretchable sensors since it is generally considered to be transparent, chemically inert, nonflammable, and non-toxic. Moreover, it has variable mechanical properties, is of low cost, and has outstanding adhesion with silicon wafers, which is important for bonding electronic materials to its surface. However, PDMS has a large coefficient of thermal expansion and a low Young’s modulus, thus resulting in poor thermal and mechanical stability. When a metal film is sputtered or thermally evaporated on the PDMS surface, the metal film is subjected to thermal stress, which produces wrinkles or cracks [111]. To solve this problem, some NPs are doped into PDMS to enhance the mechanical, thermal, and thermal expansion coefficients [112]. Polyurethane (PU) [113,114,115] is another popular substrate that has been used in many applications, such as stretchable printed circuit board technologies [116]. PU possesses many advantages, including high mechanical strength, excellent wearability, and long life. In addition, there are also certain flexible and stretchable substrates, such as poly ethylene terephthalate (PET) [117, 118], polyimide (PI) [119, 120], and Ecoflex [121, 122]. These substrates have gradually received recognition due to their outstanding mechanical properties, good flexibility, and high stretchability.
Graphene-based active materials
Graphene is film with a honeycomb structure that consists of an atomically thin layer of sp2-hybridized carbon atoms, which is a quasi-2D material with a thickness of only one atomic layer. It was discovered by Andre Geim and Konstantin Novoselov and was successfully separated from graphite by micro-mechanical stripping. The main preparation methods include bulk growth with CVD [123] and chemical exfoliation [124] from bulk graphite. Graphene is regarded as an outstanding material that is used as an active material in stretchable sensors because of its high mechanical strength, high electrical conductivity, high specific surface area, low Johnson noise, and low number of defects for low 1/f noise [125]. Although graphene possesses many advantages, it might not suitable for stretchable sensors. For example, the stretchability of a graphene-based strain sensor is less than 5% because of the brittleness of graphene sheets. Some highly sensitive stretchable sensors have been fabricated by using graphene sheets on flexible substrates to achieve stretchability [121, 126, 127]. To improve the tensile properties of graphene, researchers have employed various methods, including the use of graphene sheets of giant sizes, optimization of the spinning process, and the introduction of divalent ion cross-linking [128, 129]. However, when stretchability is increased by using the above methods, new problems arise. For example, graphene fibers in spiral form achieve stretchability to some extent but are limited by low electrical conductivity (4.1 × 104 S/m) due to their structural defects and the oxygen-containing groups in the constituent CRG sheets [130, 131]. Hence, further work is required before graphene is used to obtain stretchable materials for various stretchable sensor applications.
Carbon nanotube (CNT)-based active materials
CNTs [132, 133], as a 1D nanomaterial, have unique characteristics, such as light weight, perfectly hexagonal connectivity, an exceptionally high aspect ratio (> 106), Young’s modulus (~ 1 TPa), tensile strength (~ 100 GPa), current carrying ability (109 A/cm2), and thermal conductivity (3500 W/Mk) [132]. Sumio Iijima developed CNTs from the carbon fiber that is produced by the arc discharge method using high-resolution transmission electron microscopy in January 1991 [134, 135]. In addition to arc discharge [136], there are high-volume, low-purity techniques for producing CNTs, such as laser ablation [137] and chemical vapor deposition [138]. For wearable stretchable sensors, a reliable and scalable facile fabrication technique is of the utmost importance. CNTs are directly deposited onto flexible or stretchable substrates to acquire stretchability via vacuum filtration [139], spin-coating [140], spray-coating [141], or inkjet printing [142]. Selecting the appropriate structure for CNT, such as yarn or a sheet, is another effective method for achieving stretchability. For example, Nae-eung Lee reported the construction of transparent, stretchable, ultrasensitive, and tunable strain sensors from a novel stacked nanohybrid structure of single-wall CNTs and a conductive elastomer consisting of poly and a polyurethane dispersion [35].
Nanowire (NW)-based materials
Among metal nanostructures, metallic NWs are very promising candidates for stretchable sensors [143]. A NW is defined as a 1D structural material with a width of 100 nm in the transverse direction and unlimited width in the portrait direction. There are many types of NW materials, some of which are well suited to be active materials of stretchable sensors, such as Si, zinc oxide (ZnO), gallium arsenide (GaAs), and selenide (CdSe). AgNW, as one of the most important conductive materials, has attracted substantial attention for its potential application as transparent and flexible electrodes. Stretchable sensors with AgNWs are made through the lithographic deposition of electrodes. However, negative characteristics of AgNWs seriously affect the stretchable sensor, including weak adhesion of AgNWs on flexible polymer substrates and surface buckling/wrinkling of the AgNW thin film on the substrate, which leads to a permanent loss of contact between adjacent AgNWs [144]. To solve these problems, AgNW stretchable sensors have adopted a novel structure and new technology [145]. Other NWs have acquired excellent results for stretchable sensors. To meet the requirements of highly stretchable sensors, some noble metal NWs have been designed; these NWs change the architecture of the Pt-coated polymeric nanofiber interlocking structure [79]. However, problems such as complex processes or high cost may be encountered during the fabrication of these structures. These problems will be solved in the near future.
NP-based materials
The application of stretchable sensors relies on NPs with diameters that range from 10 to 100 nm and diverse shapes, including sphere, rectangle, hexagon, cube, triangle, star, and branch-like outlines. It is feasible to synthesize nearly any type of NP. Control NP types include pure metals (e.g., Au, Ag, Ni, Co, Pt, Pd, Cu, Al), metal alloys (e.g., Au/Ag, Au/Cu, Au/Ag/Cu, Au/Pt, Au/Pd, and Au/Ag/Cu/Pd, PtRh, Ni–Co, Pt–Ni–Fe), metal oxides, and semiconducting materials (e.g., Si, Ge) [146]. This is quite helpful for stretchable sensors in terms of material selection. Another possibility is to cap the NPs with a wide variety of molecular ligands and prepare NP films with controllable porous properties, which will improve the sensitivity of the stretchable sensor. Stretchable NP sensors facilitate easier and more affordable fabrication compared to other stretchable sensors requiring complicated and multistep processes. Various combinations of NP methods and flexible substrates are possible. For example, NPs may be deposited on flexible substrates and integrated into the composite of a flexible material [147]. NPs are excellent materials that solve the problem that arises when incorporating 1D materials into the polymer matrix, which increases the stiffness and decreases the stretchability of the resultant composite [33]. These advantages have attracted substantial attention. However, NPs are still limited by their small gauge factor, which makes them unsuitable for sensing small strains. Hence, stretchable NP sensors cannot currently be used in industrial applications.
Liquid metal material
In recent years, researchers have invested significant effort into increasing composite material strength. However, material delamination and/or local fracture in rigid electronic components is frequently observed in stretchable sensors. The main reason for the poor durability is that there is an intrinsic difference in the Young’s modulus between the rigid conductors and the soft support material. To solve the problem of Young’s modulus mismatch, many materials have been explored. Liquid conductors have attracted substantial attention, due to their advantages of low Young’s modulus and high durability, which are maintained even under a large strain. Awareness has grown among researchers that using softer liquid materials to generate stretchable conductors is a promising method to fabricate high-performance stretchable sensors. Wenlong Cheng fabricated reliable and long-term stretchable sensors using ionic liquids, which overcome the mechanical mismatch problem [148]. Meanwhile, the method of injecting liquid metal into the flexible substrate has drawbacks. For example, significant hysteresis has been observed. The main reasons for this hysteresis are the viscoelastic characteristics and the retarded reaggregation between filler–filler bonds under a relaxed state [16]. Hence, large-scale hysteresis is inevitable. Hye Moon Lee found that ionic liquid-based wavy sensors have the ability to improve hysteresis performance compared to normal ionic liquid-based flat strain sensors. These devices are based on an ionic liquid consisting of ethylene glycol and sodium chloride, which is encapsulated within a symmetric wavy channel [13]. In addition, masked deposition, direct nozzle writing, and vacuum-induced patterning were applied and yielded outstanding effects [149,150,151,152].
The performances of stretchable sensors according to their sensing materials and sensing mechanisms are listed in Table 2.
Strategies for achieving stretchability
An important characteristic of a stretchable sensor is its ability to stretch with bodily movements without incurring damage, especially when monitoring large-scale movements. That is, it is essential to fabricate a strain sensor with high stretchability (∼ 50% strain) and high sensitivity (a gauge factor of above 100). The problem of sensor stretchability has been addressed by investigating shape design. We will introduce the latest research results and disadvantages in detail in the following section of this article.
Geometric structuring
Plane shape design is an important pathway for achieving stretchability of a stretchable sensor. To improve large-scale stretchability such that a sensor more closely fits on the skin, many types of patterns have been designed by researchers. These patterned electrodes adhere to a compliant substrate to promote continuous plastic deformation. As described above, stretchability is an important factor when monitoring human body signals. Another factor, conductivity, also plays an indispensable role in the process. The final effects of these methods depend on the pattern geometry and material properties to a large extent. Lee [46] fabricated a serpentine stretchable sensor, which stretches to strains of up to 50% before cracking (Fig. 15a). Wei [161] demonstrated that CNT mesh with a macroscopic grid and a microscopic network structure achieves large-scale stretchability (Fig. 15b). Although a stiff-island sensor fabricated by Rogers [80] with small-scale stretchability was used to evaluate subtle motions of the throat that are associated with speech, it stretches up to 30% (Fig. 15c). The feasibility of achieving stretchability by geometric structuring has been demonstrated. Hence, investigators have invested a great deal of effort in optimizing geometric structure to achieve better performance. Horseshoes (Fig. 15d, e), which are serpentine microstructures that were originally developed for interconnections in stretchable electronics, exhibit a wide range of desired mechanical responses [18].
3D structuring
Buckling is an outstanding 3D method that absorbs most of tensile strain that is produced by the compression-relaxation of the substrate. The generation of stress that is focused on the interface of the elastic and non-elastic materials causes the surface to fracture under large-scale stretchability conditions due to the Young’s modulus mismatch, which has always been a challenge. As previously stated, buckling provides a suitable mechanism for solving the problem of fracture. In some cases, to achieve remarkable stretchability, the stretchable substrate is prestretched to a strain of 50%, and the stretched substrate is coated with conductivity-active materials in the process of fabricating the stretchable sensor [162]. The bucking will appear on the substrate when the substrate is in the relaxed state, which is called the pre-stretching process. Another simple fabrication method is called the self-assembly texturing process, which generates a periodically wrinkled structure that is supported by microstructured elastomeric substrates and provides excellent stretchability. Multiaxial thermal prestrain leads to the formation of wavy buckles [163] (Fig. 16a), while uniaxial prestrain results in a linear bucking pattern (Fig. 16b) [164]. Chou demonstrated that simply straining and releasing a film of CNT electrochemical deposition onto elastomeric substrates results in the formation of buckles (Fig. 16c) [162]. Pop-up structures are created using lithographically patterned surface chemistry to provide adhesion sites to the substrate. The unadhered sections of the film that are far away from the substrate obey the predefined wavelength (Fig. 16d) [165].
In general, some metal springs suffer large-scale stretchability without fracture in daily life. Similarly, nanocomposite springs, which have the same function, have recently stimulated tremendous interest. CNT yarns that are made by solution extrusion or twist spinning processes have many attractive properties, including a high strength-to-weight ratio, high flexibility, unlimited yarn length, and high electrical conductivity that are superior to those of conventional fibers and rubber-like materials. However, CNT yarns undergo an intrinsically irreversible deformation process under large-scale tension, which is a major factor in failure. To address this problem, Anyuan Cao reported a stretchable sensor with yarn-derived spring-like CNT rope consisting of uniform, neat loops with perfect arrangement over a long distance (Fig. 16e). These CNT ropes elegantly solve the problem of stretchability and handle stretchability strains of up to 285% [166]. Based on the CNT spring, Cao [167] also reported the use of graphene oxide fibers to fabricate stretchable sensors with a spring shape. He successfully encoded uniformly arranged GO loops along the entire length of the fiber by using a humidity-assisted freestanding strip-scrolling process.
Production process for stretchable sensors
Recent advances in the production process for stretchable sensors will be introduced in this section. Parts of the production process that involve composite materials have already been introduced in the first section of this paper; we will not repeat them here. With the development of stretchable sensors, the production process has made qualitative leaps every few years. The advancement of research has led to a trend in the production of stretchable sensors toward large-scale, low-cost, simple, efficient, and clean processes in recent years. To solve the stretchability problem, fabricated sensors are integrated onto a wearable substrate such as a textile, elastomer, or patch. The main step in fabricating a stretchable sensor is to combine the substrate and electrode material effectively. The use of patterned electrodes is a powerful strategy for achieving stretchability. Fabricating patterned electrodes can involve many methods, one of which is planar printing. Various printing methods have been employed for the fabrication of a variety of stretchable circuits, including screen printing [168], direct nozzle writing [150], mask-assisted spraying [169, 170], and inkjet printing [171] (Fig. 17). While those methods are effective at creating stretchable sensors, problems such as strict requirements for ink formulation [168] have prevented their widespread adoption. Other methods, such as photolithography [172], vacuum filtration [47] and micro-channel molding, filling, and lamination [173], are more effective. However, these methods are also largely limited by the complicated pretreatment or post-treatment of substrates [169, 170, 174], high processing costs, and huge amount of material waste. Furthermore, the preparation of highly conductive stretchable patterns remains challenging.
3D printing technology 3D printing is a technology that fabricates structures with arbitrary geometries and heterogeneous material properties [175]. The appearance of 3D printing technology has rapidly attracted substantial attention, as it is capable of rapid and on-demand production of mechanically sophisticated and personalized objects with efficient use of materials. The fabrication processes for 3D printing are diverse and include sheet lamination, vat photopolymerization, powder bed fusion, directed energy deposition, material extrusion, material jetting, and binder jetting. Each process creates parts layer by layer and offers multiple options in terms of cost, level of feature detail, and materials. For fabrication by 3D printing, design concepts are translated into products through direct digital manufacturing, thereby removing the restrictions of molds. Thus, 3D printing allows the creation of complex geometric shapes. 3D printing plays an important role in the fabrication of stretchable sensors, with extremely diverse applications. For example, Robert J. Wood fabricated a 3D printing sensor within stretchable elastomers through the embedded 3D printing method, which allows soft sensors to be created in nearly arbitrary planar and 3D motifs in a highly programmable and seamless manner. With the development of electrode patterning, Ali Javey fabricated a base substrate that contained microchannels and slots for integrated components with a 3D printer. Then, the microchannels were injected with liquid metal to form the liquid-based circuit components, devices, and interconnects. Direct writing is also regarded as an effective method for electrode patterning.
Although standard 3D printing technologies have advanced to the point that it is now possible to print with a wide range of materials, including metals, ceramics, and polymers, the resulting structures are generally limited to a single material, or, at best, a limited number of compatible materials. This challenge has been overcome to a certain extent. McAlpine achieved seamless integration of diverse materials with 3D printing [176]. This represents a good starting point for the fabrication of multifunctional devices with optoelectronic functionality.
Summary and prospects
With the development of smart devices, highly stretchable supersensitive sensors for wearable biomedical applications have ushered in new market prospects. This paper reviewed specific research results for stretchable sensors in terms of function, design considerations, and the production process. This paper identifies certain key problems and possible approaches to resolve these issues in order to supply information for further research on stretchable sensors. It is estimated that the functions of stretchable sensors for wearable biomedical applications will greatly affect people’s lives, especially in terms of medical monitoring. In the first part of this paper, we introduce the following functions of stretchable sensors: human body motion detection, vital sign monitoring, and environmental monitoring. The existing functions of stretchable sensors meet people’s needs. However, multifunctional integration and complex environmental analysis of stretchable sensors that are sufficiently stable and efficient for practical use have not yet been realized. A trend in future sensors will be to integrate the attributes of flexibility and stretchability to realize multifunctional, soft, and human-friendly devices. Achieving all functions of human skin is a performance benchmark for the development of stretchable sensors. Current stretchable sensors are far from achieving this goal. The main requirements include high sensitivity, fast response time, large detection range, integration, and multi-analysis. These requirements, although seemingly simple, will require substantial advances in materials and the production process. Thus, in the next section of this paper, we introduce design considerations and production processes. Researchers have been struggling to improve the performance of the materials of stretchable sensors since the appearance of metal, inorganic semiconductors, and nanomaterials. The need to discover new materials for stretchable sensors is urgent; when this occurs, stretchable sensors for wearable biomedical applications will achieve another qualitative leap. Given further research and its highly interdisciplinary nature, more materials that possess the features of high mechanical strength and satisfactory electrical conductivity will be introduced or developed, thus expanding the range of choices for stretchable sensors. Moreover, great achievements have also been made in terms of production processes, thereby providing more methods for fabricating stretchable sensors. However, these production processes have certain shortcomings; for example, photolithography has the disadvantages of high processing costs, complex processes, and high material waste. Therefore, these methods may not conform to development trends and direction. Since the appearance of 3D printing, printing technologies have rapidly gained acceptance because of their unique characteristics, such as material universality, flexibility of substrate applicability, convenient customization, large-scale continuous production, efficiency and environmental friendliness. Several excellent reviews describe a trend in production processes toward large-scale, low-cost, efficient and clean manufacturing. The rapid pace of progress in stretchable sensor technology suggests that the fabrication of more complex stretchable sensors with properties that far surpass those of their skin equivalents will be soon be possible.
References
Lacour SP, Wagner S, Huang Z, Suo Z (2003) Stretchable gold conductors on elastomeric substrates. Appl Phys Lett 82(15):2404–2406
Trung TQ, Lee NE (2016) Flexible and stretchable physical sensor integrated platforms for wearable human—activity monitoring and personal healthcare. Adv Mater 28(22):4338–4372
Hammock ML, Chortos A, Tee BC, Tok JB, Bao Z (2013) 25th anniversary article: the evolution of electronic skin (e-skin): a brief history, design considerations, and recent progress. Adv Mater 25(42):5997–6038
You I, Kim B, Park J, Koh K, Shin S, Jung S, Jeong U (2016) Stretchable E-skin apexcardiogram sensor. Adv Mater 28(30):6359–6364
Tang Y, Zhao Z, Hu H, Liu Y, Wang X, Zhou S, Qiu J (2015) Highly stretchable and ultrasensitive strain sensor based on reduced graphene oxide microtubes-elastomer composite. ACS Appl Mater Interfaces 7(49):27432–27439
Zhou J, Gu Y, Fei P, Mai W, Gao Y, Yang R, Bao G, Wang ZL (2008) Flexible piezotronic strain sensor. Nano Lett 8(9):3035–3040
Zhang W, Zhu R, Nguyen V, Yang R (2014) Highly sensitive and flexible strain sensors based on vertical zinc oxide nanowire arrays. Sens Actuators, A 205(2):164–169
Cheng Y, Wang R, Sun J, Gao L (2016) A stretchable and highly sensitive graphene-based fiber for sensing tensile strain, bending, and torsion. Adv Mater 27(45):7365–7371
Larmagnac A, Eggenberger S, Janossy H, Vörös J (2014) Stretchable electronics based on Ag-PDMS composites. Sci Rep 4:7254
Choi DY, Kim MH, Oh YS, Jung SH, Jung JH, Sung HJ, Lee HW, Lee HM (2017) Highly stretchable, hysteresis-free ionic liquid-based strain sensor for precise human motion monitoring. ACS Appl Mater Interfaces 9(2):1770–1780
Nam I, Bae S, Park S, Yoo YG, Lee JM, Han JW, Yi J (2015) Omnidirectionally stretchable, high performance supercapacitors based on a graphene–carbon-nanotube layered structure. Nano Energy 15:33–42
Lee MS, Lee K, Kim SY, Lee H, Park J, Choi KH, Kim HK, Kim DG, Lee DY, Nam SW (2013) High-performance, transparent, and stretchable electrodes using graphene-metal nanowire hybrid structures. Nano Lett 13(6):2814–2821
Liang J, Li L, Tong K, Ren Z, Hu W, Niu X, Chen Y, Pei Q (2014) Silver nanowire percolation network soldered with graphene oxide at room temperature and its application for fully stretchable polymer light-emitting diodes. ACS Nano 8(2):1590–1600
Coskun MB, Akbari A, Lai D, Neild A, Majumder M, Alan T (2016) Ultrasensitive strain sensor produced by direct patterning of liquid crystals of graphene oxide on a flexible substrate. ACS Appl Mater Interfaces 8(34):22501–22505
Park SJ, Kim DW, Jang SW, Jin ML, Kim SJ, Ok JM, Kim JS, Jung HT (2016) Fabrication of graphite grids via stencil lithography for highly sensitive motion sensors. Carbon 96:491–496
Muth JT, Vogt DM, Truby RL, Mengüç Y, Kolesky DB, Wood RJ, Lewis JA (2014) 3D printing: embedded 3D printing of strain sensors within highly stretchable elastomers. Adv Mater 26(36):6307–6312
Lee CH, Ma Y, Jang KI, Banks A, Pan T, Feng X, Kim JS, Kang D, Raj MS, Mcgrane BL (2015) Soft core/shell packages for stretchable electronics. Adv Func Mater 25(24):3698–3704
Jang KI, Chung HU, Sheng X, Chi HL, Luan H, Jeong J, Cheng H, Kim GT, Sang YH, Lee JW (2015) Soft network composite materials with deterministic and bio-inspired designs. Nat Commun 6:6566
Matsuzaki R, Tabayashi K (2015) Highly stretchable, global, and distributed local strain sensing line using GaInSn electrodes for wearable electronics. Adv Func Mater 25(25):3806–3813
Yoon SG, Koo HJ, Chang ST (2015) Highly stretchable and transparent microfluidic strain sensors for monitoring human body motions. ACS Appl Mater Interfaces 7(49):27562–27570
Lee SP, Klinker LE, Ptaszek L, Work J, Liu C, Quivara F, Webb C, Dagdeviren C, Wright JA, Ruskin JN (2015) Catheter-based systems with integrated stretchable sensors and conductors in cardiac electrophysiology. Proc IEEE 103(4):682–689
Rogers E, Polygerinos P, Walsh C, Goldfield E (2015) Smart and connected actuated mobile and sensing suit to encourage motion in developmentally delayed infants 1. J Med Devices 9(3):030914
Wang Y, Wang L, Yang T, Li X, Zang X, Zhu M, Wang K, Wu D, Zhu H (2014) Wearable and highly sensitive graphene strain sensors for human motion monitoring. Adv Func Mater 24(29):4666–4670
Park JJ, Hyun WJ, Mun SC, Park YT, Park OO (2015) Highly stretchable and wearable graphene strain sensors with controllable sensitivity for human motion monitoring. ACS Appl Mater Interfaces 7(11):6317–6324
Rodgers MM, Pai VM, Conroy RS (2015) Recent advances in wearable sensors for health monitoring. Sens J IEEE 15(6):3119–3126
Jang KI, Han SY, Xu S, Mathewson KE, Zhang Y, Jeong JW, Kim GT, Webb RC, Lee JW, Dawidczyk TJ (2014) Rugged and breathable forms of stretchable electronics with adherent composite substrates for transcutaneous monitoring. Nat Commun 5(5):4779
Rosset S, Niklaus M, Dubois P, Shea HR (2008) Mechanical characterization of a dielectric elastomer microactuator with ion-implanted electrodes. Sens Actuators, A 144(1):185–193
Zhang Y, Chad Webb R, Luo H, Xue Y, Kurniawan J, Cho NH, Krishnan S, Li Y, Huang Y, Rogers JA (2016) Flexible electronics: theoretical and experimental studies of epidermal heat flux sensors for measurements of core body temperature. Adv Healthcare Mater 5(1):119–127
Trung TQ, Ramasundaram S, Lee NE (2017) Transparent, stretchable, and rapid-response humidity sensor for body-attachable wearable electronics. Nanoresearch 10(6):2021–2033
Liao X, Liao Q, Zhang Z, Yan X, Liang Q, Wang Q, Li M, Zhang Y (2016) A highly stretchable ZnO@Fiber-based multifunctional nanosensor for strain/temperature/UV detection. Adv Func Mater 26(18):3074–3081
Ho MD, Ling Y, Yap LW, Wang Y, Dong D, Zhao Y, Cheng W (2017) Percolating network of ultrathin gold nanowires and silver nanowires toward “invisible” wearable sensors for detecting emotional expression and apexcardiogram. Adv Func Mater 27(25):1700845
Nam SH, Jeon PJ, Min SW, Lee YT, Park EY, Im S (2014) Highly sensitive non-classical strain gauge using organic heptazole thin-film transistor circuit on a flexible substrate. Adv Func Mater 24(28):4413–4419
Chen S, Wei Y, Yuan X, Lin Y, Liu L (2016) A highly stretchable strain sensor based on a graphene/silver nanoparticle synergic conductive network and a sandwich structure. J Mater Chem C 4(19):4304–4311
Lee H, Cho J, Kim J (2016) Printable skin adhesive stretch sensor for measuring multi-axis human joint angles. In: 2016 IEEE international conference on robotics and automation (ICRA). IEEE, pp 4975–4980
Roh E, Hwang BU, Kim D, Kim BY, Lee NE (2015) Stretchable, transparent, ultra-sensitive and patchable strain sensor for human-machine interfaces comprising a nanohybrid of carbon nanotubes and conductive elastomers. ACS Nano 9(6):6252–6261
Gao W, Emaminejad S, Nyein HYY, Challa S, Chen K, Peck A, Fahad HM, Ota H, Shiraki H, Kiriya D (2016) Fully integrated wearable sensor arrays for multiplexed in situ perspiration analysis. Nature 529(7587):509–514
Park J, Kim J, Kim K, Kim SY, Cheong WH, Park K, Song JH, Namgoong G, Kim JJ, Heo J (2016) Wearable, wireless gas sensors using highly stretchable and transparent structures of nanowires and graphene. Nanoscale 8(20):10591–10597
Park Y, Shim J, Jeong S, Yi GR, Chae H, Bae JW, Kim SO, Pang C (2017) Microtopography-guided conductive patterns of liquid-driven graphene nanoplatelet networks for stretchable and skin-conformal sensor array. Adv Mater 29(21):1606453
Wu X, Han Y, Zhang X, Lu C (2016) Highly sensitive, stretchable, and wash-durable strain sensor based on ultrathin conductive layer@polyurethane yarn for tiny motion monitoring. ACS Appl Mater Interfaces 8(15):9936–9945
Lu C, Park S, Richner TJ, Derry A, Brown I, Hou C, Rao S, Kang J, Moritz CT, Fink Y (2017) Flexible and stretchable nanowire-coated fibers for optoelectronic probing of spinal cord circuits. Sci Adv 3(3):e1600955
Ki H, Jang J, Jo Y, Kim DY, Chee SS, Oh BY, Song C, Sun SL, Choi S, Choi Y (2015) Chemically driven, water-soluble composites of carbon nanotubes and silver nanoparticles as stretchable conductors. ACS Macro Lett 4(7):769–773
Yamada T, Hayamizu Y, Yamamoto Y, Yomogida Y, Izadi-Najafabadi A, Futaba DN, Hata K (2011) A stretchable carbon nanotube strain sensor for human-motion detection. Nat Nanotechnol 6(5):296–301
Khan Y, Ostfeld AE, Lochner CM, Pierre A, Arias AC (2016) Monitoring of vital signs with flexible and wearable medical devices. Adv Mater 28(22):4373–4395
He W, Sun Y, Xi J, Abdurhman AA, Ren J, Duan H (2016) Printing graphene-carbon nanotube-ionic liquid gel on graphene paper: towards flexible electrodes with efficient loading of PtAu alloy nanoparticles for electrochemical sensing of blood glucose. Anal Chim Acta 903:61–68
Lee JH, Lee KY, Gupta MK, Kim TY, Lee DY, Oh J, Ryu C, Yoo WJ, Kang CY, Yoon SJ (2014) Highly stretchable piezoelectric–pyroelectric hybrid nanogenerator. Adv Mater 26(5):765–769
Webb RC, Bonifas AP, Behnaz A, Zhang Y, Yu KJ, Cheng H, Shi M, Bian Z, Liu Z, Kim YS, Yeo WH (2013) Ultrathin conformal devices for precise and continuous thermal characterization of human skin. Nat Mater 12(10):938–944
Yan C, Wang J, Lee PS (2014) Stretchable graphene thermistor with tunable thermal index. ACS Nano 9(2):2130–2137
Jin J, Lee HBR, Bao Z (2013) Flexible wireless temperature sensors based on Ni microparticle-filled binary polymer composites. Adv Mater 25(6):850–855
Wu X, Ma Y, Zhang G, Chu Y, Du J, Zhang Y, Li Z, Duan Y, Fan Z, Huang J (2015) Thermally stable, biocompatible, and flexible organic field-effect transistors and their application in temperature sensing arrays for artificial skin. Adv Func Mater 25(14):2138–2146
Lee JS, Heo J, Lee WK, Yong GL, Kim YH, Park KS (2014) Flexible capacitive electrodes for minimizing motion artifacts in ambulatory electrocardiograms. Sensors 14(8):14732–14743
Nemati E, Deen MJ, Mondal T (2012) A wireless wearable ECG sensor for long-term applications. IEEE Commun Mag 50(1):36–43
Yi S, Cheng L, Zhe W, Mi W, Li Y, Ren TL (2015) A Pressure sensing system for heart rate monitoring with polymer-based pressure sensors and an anti-interference post processing circuit. Sensors 15(2):3224–3235
Yu Y, Zhang J, Liu J (2013) Biomedical implementation of liquid metal ink as drawable ECG electrode and skin circuit. PLoS ONE 8(3):e58771
Hwang SW, Lee CH, Cheng H, Jeong JW, Kang SK, Kim JH, Shin J, Yang J, Liu Z, Ameer GA (2015) Biodegradable elastomers and silicon nanomembranes/nanoribbons for stretchable, transient electronics, and biosensors. Nano Lett 15(5):2801–2808
Yeo WH, Kim YS, Lee J, Ameen A, Shi L, Li M, Wang S, Ma R, Jin SH, Kang Z (2013) Multifunctional epidermal electronics printed directly onto the skin. Adv Mater 25(20):2773–2778
Son D, Lee J, Qiao S, Ghaffari R, Kim J, Lee JE, Song C, Kim SJ, Lee DJ, Jun SW (2014) Multifunctional wearable devices for diagnosis and therapy of movement disorders. Nat Nanotechnol 9(5):397–404
Kim T, Park J, Sohn J, Cho D, Jeon S (2016) Bioinspired, highly stretchable, and conductive dry adhesives based on 1D–2D hybrid carbon nanocomposites for all-in-one ECG electrodes. ACS Nano 10(4):4770–4778
Jung HC, Moon JH, Baek DH, Lee JH, Choi YY, Hong JS, Lee SH (2012) CNT/PDMS composite flexible dry electrodesfor long-term ECG monitoring. IEEE Trans Biomed Eng 59(5):1472–1479
Wang LF, Liu JQ, Peng HL, Yang B (2013) MEMS-based flexible capacitive electrode for ECG measurement. Electron Lett 49(12):739–740
Xu S, Zhang Y, Jia L, Mathewson KE, Jang KI, Kim J, Fu H, Huang X, Chava P, Wang R, Bhole S, Wang L, Na YJ, Guan Y, Flavin M, Han Z, Huang Y, Rogers JA (2014) Soft microfluidic assemblies of sensors, circuits, and radios for the skin. Science 344(6179):70–74
Tamura T, Maeda Y, Sekine M, Yoshida M (2014) Wearable photoplethysmographic sensors—past and present. Electronics 3(2):282–302
Schwartz G, Tee BC, Mei J, Appleton AL, Kim DH, Wang H, Bao Z (2013) Flexible polymer transistors with high pressure sensitivity for application in electronic skin and health monitoring. Nat Commun 4(5):1859
Nie B, Xing S, Brandt JD, Pan T (2012) Droplet-based interfacial capacitive sensing. Lab Chip 12(6):1110–1118
Guo H, Lan C, Zhou Z, Sun P, Wei D, Li C (2017) Transparent, flexible, and stretchable WS2 based humidity sensors for electronic skin. Nanoscale 9(19):6246–6253
Hedrich F, Kliche K, Storz M, Billat S, Ashauer M, Zengerle R (2010) Thermal flow sensors for MEMS spirometric devices. Sens Actuators, A 162(2):373–378
Park J, Lee Y, Hong J, Ha M, Jung YD, Lim H, Kim SY, Ko H (2014) Giant tunneling piezoresistance of composite elastomers with interlocked microdome arrays for ultrasensitive and multimodal electronic skins. ACS Nano 8(5):4689–4697
Min SD, Yun Y, Shin H (2014) Simplified structural textile respiration sensor based on capacitive pressure sensing method. IEEE Sens J 14(9):3245–3251
Boland CS, Khan U, Backes C, O’Neill A, Mccauley J, Duane S, Shanker R, Liu Y, Jurewicz I, Dalton AB (2014) Sensitive, high-strain, high-rate bodily motion sensors based on graphene-rubber composites. ACS Nano 8(9):8819–8830
Pegan JD, Zhang J, Chu M, Nguyen T, Park SJ, Paul A, Kim J, Bachman M, Khine M (2016) Skin-mountable stretch sensor for wearable health monitoring. Nanoscale 8(39):17295–17303
Bai P, Zhu G, Jing Q, Yang J, Chen J, Su Y, Ma J, Zhang G, Wang ZL (2015) Membrane-based self-powered triboelectric sensors for pressure change detection and its uses in security surveillance and healthcare monitoring. Adv Func Mater 24(37):5807–5813
Li M, Li H, Zhong W, Zhao Q, Dong W (2014) Stretchable conductive polypyrrole/polyurethane (PPy/PU) strain sensor with netlike microcracks for human breath detection. ACS Appl Mater Interfaces 6(2):1313–1319
Hwang BU, Lee JH, Trung TQ, Roh E, Kim DI, Kim SW, Lee NE (2015) Transparent stretchable self-powered patchable sensor platform with ultrasensitive recognition of human activities. ACS Nano 9(9):8801–8810
Atalay O, Kennon WR, Demirok E (2015) Weft-knitted strain sensor for monitoring respiratory rate and its electro-mechanical modeling. Sens J IEEE 15(1):110–122
Guo L, Berglin L, Wiklund U (2015) Design of a garment-based sensing system for breathing monitoring. Text Res J 83(5):499–509
Zheng W, Tao X, Zhu B, Wang G, Hui C (2014) Fabrication and evaluation of a notched polymer optical fiber fabric strain sensor and its application in human respiration monitoring. Text Res J 84(17):1791–1802
Denardo SJ, Nandyala R, Freeman GL, Pierce GL, Nichols WW (2010) Pulse wave analysis of the aortic pressure waveform in severe left ventricular systolic dysfunction. Circ Heart Fail 3(1):149–156
Tee BCK, Chortos A, Dunn RR, Schwartz G, Eason E, Bao Z (2015) Tunable flexible pressure sensors using microstructured elastomer geometries for intuitive electronics. Adv Func Mater 24(34):5427–5434
Persano L, Dagdeviren C, Su Y, Zhang Y, Girardo S, Pisignano D, Huang Y, Rogers JA (2013) High performance piezoelectric devices based on aligned arrays of nanofibers of poly(vinylidenefluoride-co-trifluoroethylene). Nat Commun 4(3):1633
Pang C, Lee GY, Kim TI, Kim SM, Kim HN, Ahn SH, Suh KY (2012) A flexible and highly sensitive strain-gauge sensor using reversible interlocking of nanofibres. Nat Mater 11(9):795–801
Dagdeviren C, Su Y, Joe P, Yona R, Liu Y, Kim YS, Huang Y, Damadoran AR, Xia J, Martin LW (2014) Conformable amplified lead zirconate titanate sensors with enhanced piezoelectric response for cutaneous pressure monitoring. Nat Commun 5(7697):4496
Choong CL, Shim MB, Lee BS, Jeon S, Ko DS, Kang TH, Bae J, Lee SH, Byun KE, Im J (2014) Highly stretchable resistive pressure sensors using a conductive elastomeric composite on a micropyramid array. Adv Mater 26(21):3451–3458
Lochner CM, Khan Y, Pierre A, Arias AC (2014) All-organic optoelectronic sensor for pulse oximetry. Nat Commun 5:5745
Vashist SK (2012) Non-invasive glucose monitoring technology in diabetes management: a review. Anal Chim Acta 750(11):16–27
Bandodkar AJ, Jia W, Yardımcı C, Wang X, Ramirez J, Wang J, Chem A (2014) Tattoo-based noninvasive glucose monitoring: a proof-of-concept study. Anal Chem 87(1):394–398
Kwak YH, Dong SC, Ye NK, Kim H, Yoon DH, Ahn SS, Yang JW, Yang WS, Seo S (2012) Flexible glucose sensor using CVD-grown graphene-based field effect transistor. Biosens Bioelectron 37(1):82–87
You X, Pak JJ (2014) Graphene-based field effect transistor enzymatic glucose biosensor using silk protein for enzyme immobilization and device substrate. Sens Actuators B Chem 202(4):1357–1365
Liu Y, Yu D, Zeng C, Miao Z, Dai L (2010) Biocompatible graphene oxide-based glucose biosensors. Langmuir 26(9):6158–6160
You X, Pikul JH, King WP, Pak JJ (2013) Zinc oxide inverse opal enzymatic biosensor. Appl Phys Lett 102(25):253103-1–253103-5
Liao Y-T, Yao H, Lingley A, Parviz B, Otis BP (2012) A 3-μW CMOS glucose sensor for wireless contact-lens tear glucose monitoring. IEEE J Solid-State Circuits 47(1):335–344
Yao H, Shum AJ, Cowan M, Lähdesmäki I, Parviz BA (2011) A contact lens with embedded sensor for monitoring tear glucose level. Biosens Bioelectron 26(7):3290–3296
Varghese SS, Lonkar S, Singh KK, Swaminathan S, Abdala A (2015) Recent advances in graphene based gas sensors. Sens Actuators B Chem 218:160–183
Liu X, Cheng S, Liu H, Hu S, Zhang D, Ning H (2012) A survey on gas sensing technology. Sensors 12(7):9635–9665
Yun YJ, Hong WG, Choi NJ, Kim BH, Jun Y, Lee HK (2015) Ultrasensitive and highly selective graphene-based single yarn for use in wearable gas sensor. Sci Rep 5(10904):10904
Bai S, Sun C, Wan P, Wang C, Luo R, Li Y, Liu J, Sun X (2015) Transparent conducting films of hierarchically nanostructured polyaniline networks on flexible substrates for high-performance gas sensors. Small 11(3):306–310
Ryu H, Cho SJ, Kim B, Lim G (2014) A stretchable humidity sensor based on a wrinkled polyaniline nanostructure. RSC Adv 4(75):39767–39770
Boots AW, van Berkel JJ, Dallinga JW, Smolinska A, Wouters EF, van Schooten FJ (2012) The versatile use of exhaled volatile organic compounds in human health and disease. J Breath Res 6(2):027108
And JMS, Sacks RD (2003) GC analysis of human breath with a series-coupled column ensemble and a multibed sorption trap. Anal Chem 75(10):2231–2236
Mukhopadhyay R (2004) Don’t waste your breath. Anal Chem 76(15):273A–276A
Lord H, Yu Y, Segal A, Pawliszyn J (2002) Breath analysis and monitoring by membrane extraction with sorbent interface. Anal Chem 74(21):5650–5657
Smith D, Spanel P (2010) Selected ion flow tube mass spectrometry (SIFT-MS) for on-line trace gas analysis. Mass Spectrom Rev 24(5):661–700
Konvalina G, Haick H (2013) Sensors for breath testing: from nanomaterials to comprehensive disease detection. Acc Chem Res 47(1):66–76
Shin J, Choi SJ, Lee I, Youn DY, Chong OP, Lee JH, Tuller HL, Kim ID (2013) Thin-wall assembled SnO2 fibers functionalized by catalytic Pt nanoparticles and their superior exhaled-breath-sensing properties for the diagnosis of diabetes. Adv Func Mater 23(19):2357–2367
Milne SD, Seoudi I, Al Hamad H, Talal TK, Anoop AA, Allahverdi N, Zakaria Z, Menzies R, Connolly P (2016) A wearable wound moisture sensor as an indicator for wound dressing change: an observational study of wound moisture and status. Int Wound J 13(6):1309–1314
Mehmood N, Hariz A, Templeton S, Voelcker NH (2015) A flexible and low power telemetric sensing and monitoring system for chronic wound diagnostics. BioMed Eng Online 14(1):17
Garde AS (2014) Humidity sensing properties of WO3 thick film resistor prepared by screen printing technique. J Alloy Compd 617:367–373
Kim HS, Park JS, Jeong HK, Son KS, Kim TS, Seon JB, Lee E, Chung JG, Kim DH, Ryu M (2012) Density of states-based design of metal oxide thin-film transistors for high mobility and superior photostability. ACS Appl Mater Interfaces 4(10):5416–5421
Bi H, Yin K, Xie X, Ji J, Wan S, Sun L, Terrones M, Dresselhaus MS (2013) Ultrahigh humidity sensitivity of graphene oxide. Sci Rep 3(9):2714
Lee JH, Yang D, Kim S, Park I (2013) Stretchable strain sensor based on metal nanoparticle thin film for human motion detection & flexible pressure sensing devices. In: 2013 Transducers & Eurosensors XXVII: the 17th international conference on solid-state sensors, actuators and microsystems. IEEE, pp 2624–2627
Zhang X, Wang W, Li F, Voiculescu I (2017) Stretchable impedance sensor for mammalian cell proliferation measurements. Lab Chip 17(12):2054–2066
Melzer M, Karnaushenko D, Lin G, Baunack S, Makarov D, Schmidt OG (2015) Stretchable electronics: direct transfer of magnetic sensor devices to elastomeric supports for stretchable electronics. Adv Mater 27(8):1333–1338
Chou N, Jeong J, Kim S (2013) Crack-free and reliable lithographical patterning methods on PDMS substrate. J Micromech Microeng 23(12):5035
Guo L, Deweerth SP (2010) An effective lift-off method for patterning high-density gold interconnects on an elastomeric substrate. Small 6(24):2847–2852
Yang Y, Ding S, Araki T, Jiu J, Sugahara T, Wang J, Vanfleteren J, Sekitani T, Suganuma K (2016) Facile fabrication of stretchable Ag nanowire/polyurethane electrodes using high intensity pulsed light. Nanoresearch 9(2):401–414
Trung TQ, Ramasundaram S, Hwang BU, Lee NE (2016) An all-elastomeric transparent and stretchable temperature sensor for body-attachable wearable electronics. Adv Mater 28(3):502–509
Wan S, Li Y, Peng J, Hu H, Cheng Q, Jiang L (2015) Synergistic toughening of graphene oxide–molybdenum disulfide–thermoplastic polyurethane ternary artificial nacre. ACS Nano 9(1):708–714
Adler M, Bieringer R, Schauber T, Günther J (2012) Materials for stretchable electronics compliant with printed circuit board fabrication. Wiley, Weinheim
Burgess SK, Leisen JE, Kraftschik BE, Mubarak CR, Kriegel RM, Koros WJ (2014) Chain mobility, thermal, and mechanical properties of poly(ethylene furanoate) compared to poly(ethylene terephthalate). Macromolecules 47(4):1383–1391
Yan C, Cho JH, Ahn JH (2012) Graphene-based flexible and stretchable thin film transistors. Nanoscale 4(16):4870–4882
Park G, Chung HJ, Kim K, Lim SA, Kim J, Kim YS, Liu Y, Yeo WH, Kim RH, Kim SS (2014) Immunologic and tissue biocompatibility of flexible/stretchable electronics and optoelectronics. Adv Healthcare Mater 3(4):515–525
Ruh D, Reith P, Sherman S, Theodor M, Ruhhammer J, Seifert A, Zappe H (2014) Stretchable optoelectronic circuits embedded in a polymer network. Adv Mater 26(11):1706–1710
Yun J, Lim Y, Jang GN, Kim D, Lee SJ, Park H, Hong SY, Lee G, Zi G, Ha JS (2016) Stretchable patterned graphene gas sensor driven by integrated micro-supercapacitor array. Nano Energy 19:401–414
Amjadi M, Yoon YJ, Park I (2015) Ultra-stretchable and skin-mountable strain sensors using carbon nanotubes-ecoflex nanocomposites. Nanotechnology 26(37):375501
Kim KS, Zhao Y, Jang H, Lee SY, Kim JM, Kim KS, Ahn JH, Kim P, Choi JY, Hong BH (2009) Large-scale pattern growth of graphene films for stretchable transparent electrodes. Nature 457(7230):706
Zhang L, Liang J, Huang Y, Ma Y, Wang Y, Chen Y (2009) Size-controlled synthesis of graphene oxide sheets on a large scale using chemical exfoliation. Carbon 47(14):3365–3368
Xie H, Wang K, Zhang Z, Zhao X, Liu F, Mu H (2015) Temperature and thickness dependence of the sensitivity of nitrogen dioxide graphene gas sensors modified by the atomic layer deposited Zinc Oxide films. RSC Adv 5(36):28030–28037
Shi G, Zhao Z, Pai JH, Lee I, Zhang L, Stevenson C, Ishara K, Zhang R, Zhu H, Ma J (2016) Highly sensitive, wearable, durable strain sensors and stretchable conductors using graphene/silicon rubber composites. Adv Func Mater 26(42):7614–7625
Lin Y, Liu S, Chen S, Wei Y, Dong X, Liu L (2016) A highly stretchable and sensitive strain sensor based on graphene–elastomer composites with a novel double-interconnected network. J Mater Chem C 4(26):6345–6352
Dong Z, Jiang C, Cheng H, Yang Z, Shi G, Lan J, Qu L (2012) Facile fabrication of light, flexible and multifunctional graphene fibers. Adv Mater 24(14):1856–1861
Xu Z, Sun H, Zhao X, Gao C (2013) Ultrastrong fibers assembled from giant graphene oxide sheets. Adv Mater 25(2):188–193
Huang X, Qi X, Boey F, Zhang H (2012) Graphene-based composites. Chem Soc Rev 41(2):666–686
Bai H, Li C, Shi G (2011) Functional composite materials based on chemically converted graphene. Adv Mater 23(9):1089–1115
De Volder MF, Tawfick SH, Baughman RH, Hart AJ (2013) Carbon nanotubes: present and future commercial applications. Science 339(6119):535–539
Park S, Vosguerichian M, Bao Z (2013) A review of fabrication and applications of carbon nanotube film-based flexible electronics. Nanoscale 5(5):1727–1752
Iijima S, Ichihashi T (1993) Single-shell carbon nanotubes of 1-nm diameter. Nature 364(6439):737
Iijima S (1991) Helical microtubules of graphitic carbon. Nature 354(6348):56–58
Ebbesen TW, Ajayan PM, Hiura H, Tanigaki K (1994) Purification of nanotubes. Nature 367(6463):519
Guo T, Nikolaev P, Rinzler AG, Tomanek D, Colbert DT, Smalley RE (1995) Self-assembly of tubular fullerenes. J Phys Chem 99(27):10694–10697
Colomer JF, Willems I, Kónya Z, Fonseca A, Nagy JB, Tendeloo GV (1999) Synthesis of single-wall carbon nanotubesby catalytic decomposition of hydrocarbons. Chem Commun 14(14):1343–1344
Xiao X, Peng X, Jin H, Li T, Zhang C, Gao B, Hu B, Huo K, Zhou J (2013) Freestanding mesoporous VN/CNT hybrid electrodes for flexible all-solid-state supercapacitors. Adv Mater 25(36):5091–5097
Kim SH, Song W, Jung MW, Kang MA, Kim K, Chang SJ, Lee SS, Lim J, Hwang J, Myung S (2014) Carbon nanotube and graphene hybrid thin film for transparent electrodes and field effect transistors. Adv Mater 26(25):4247–4252
Lipomi DJ, Vosgueritchian M, Tee BC, Hellstrom SL, Lee JA, Fox CH, Bao Z (2011) Skin-like pressure and strain sensors based on transparent elastic films of carbon nanotubes. Nat Nanotechnol 6(12):788–792
Ko H, Lee J, Kim Y, Lee B, Jung CH, Choi JH, Kwon OS, Shin K (2014) Active digital microfluidic paper chips with inkjet-printed patterned electrodes. Adv Mater 26(15):2335–2340
Lee P, Lee J, Lee H, Yeo J, Hong S, Nam KH, Lee D, Lee SS, Ko SH (2012) Flexible electronics: highly stretchable and highly conductive metal electrode by very long metal nanowire percolation network. Adv Mater 24(25):3326–3332
Bjørnetun Haugen A, Forrester JS, Damjanovic D, Li B, Bowman KJ, Jones JL (2013) Structure and phase transitions in 0.5(Ba0.7Ca0.3TiO3)–0.5(BaZr0.2Ti0.8O3) from − 100°C to 150°C. J Appl Phys 113(1):257602
Amjadi M, Pichitpajongkit A, Lee S, Ryu S, Park I (2014) Highly stretchable and sensitive strain sensor based on silver nanowire-elastomer nanocomposite. ACS Nano 8(5):5154–5163
Segevbar M, Haick H (2013) Flexible sensors based on nanoparticles. ACS Nano 7(10):8366–8378
Lee J, Kim S, Lee J, Yang D, Park BC, Ryu S, Park I (2014) A stretchable strain sensor based on a metal nanoparticle thin film for human motion detection. Nanoscale 6(20):11932–11939
Nassar JM, Rojas JP, Hussain AM, Hussain MM (2016) From stretchable to reconfigurable inorganic electronics. Extreme Mech Lett 9:245–268
Kramer RK, Majidi C, Wood RJ (2013) Masked deposition of gallium–indium alloys for liquid-embedded elastomer conductors. Adv Func Mater 23(42):5292–5296
Boley JW, White EL, Chiu GTC, Kramer RK (2014) Direct writing of gallium–indium alloy for stretchable electronics. Adv Func Mater 24(23):3501–3507
Cumby BL, Hayes GJ, Dickey MD, Justice RS, Tabor CE, Heikenfeld JC (2012) Reconfigurable liquid metal circuits by Laplace pressure shaping. Appl Phys Lett 101(17):277–303
Park J, Wang S, Li M, Ahn C, Hyun JK, Kim DS, Kim K, Rogers JA, Huang Y, Jeon S (2012) Three-dimensional nanonetworks for giant stretchability in dielectrics and conductors. Nat Commun 3(2):916
Suzuki K, Yataka K, Okumiya Y, Sakakibara S, Sako K, Mimura H, Inoue Y (2016) Rapid-response, widely stretchable sensor of aligned MWCNT/elastomer composites for human motion detection. ACS Sens 1(6):817–825
Tadakaluru S, Thongsuwan W, Singjai P (2014) Stretchable and flexible high-strain sensors made using carbon nanotubes and graphite films on natural rubber. Sensors 14(1):868–876
Xiao L, Zhang R, Yu W, Wang K, Wei J, Wu D, Cao A, Li Z, Yao C, Zheng Q (2012) Stretchable and highly sensitive graphene-on-polymer strain sensors. Sci Rep 2(6109):870
Yao S, Zhu Y (2014) Wearable multifunctional sensors using printed stretchable conductors made of silver nanowires. Nanoscale 6(4):2345–2352
Cai L, Song L, Luan P, Zhang Q, Zhang N, Gao Q, Zhao D, Zhang X, Tu M, Yang F (2013) Super-stretchable, transparent carbon nanotube-based capacitive strain sensors for human motion detection. Sci Rep 3(6157):3048
Zhang S, Zhang H, Yao G, Liao F, Gao M, Huang Z, Li K, Lin Y (2015) Highly stretchable, sensitive, and flexible strain sensors based on silver nanoparticles/carbon nanotubes composites. J Alloy Compd 652:48–54
Ma Z, Su B, Gong S, Wang Y, Yap LW, Simon GP, Cheng W (2016) Liquid-wetting-solid strategy to fabricate stretchable sensors for human-motion detection. ACS Sens 1(3):303–311
Bae S-H, Lee Y, Sharma BK, Lee H-J, Kim J-H, Ahn J-H (2013) Graphene-based transparent strain sensor. Carbon 51(1):236–242
Sun M, Liu H, Liu Y, Qu J, Li J (2015) Graphene-based transition metal oxide nanocomposites for the oxygen reduction reaction. Nanoscale 7(4):1250–1269
Yu J, Lu W, Pei S, Gong K, Wang L, Meng L, Huang Y, Smith JP, Booksh KS, Li Q (2016) Omnidirectionally stretchable high-performance supercapacitor based on isotropic buckled carbon nanotube films. ACS Nano 10(5):5204–5211
Hafeez H, Zou Z, Kim DH, Shin JY, Song M, Kim CS, Choi WJ, Song J, Xiao J, Ryu SY (2017) Multiaxial wavy top-emission organic light-emitting diodes on thermally prestrained elastomeric substrates. Org Electron 48:314–322
Gao L, Zhang Y, Zhang H, Doshay S, Xie X, Luo H, Shah D, Shi Y, Xu S, Fang H, Fan JA (2015) Optics and nonlinear buckling mechanics in large-area, highly stretchable arrays of plasmonic nanostructures. ACS Nano 9(6):5968–5975
Sun Y, Choi WM, Jiang H, Huang YY, Rogers JA (2006) Controlled buckling of semiconductor nanoribbons for stretchable electronics. Nat Nanotechnol 1(3):201–207
Shang Y, He X, Li Y, Zhang L, Li Z, Ji C, Shi E, Li P, Zhu K, Peng Q (2012) Super-stretchable spring-like carbon nanotube ropes. Adv Mater 24(21):2896–2900
Hua C, Shang Y, Li X, Hu X, Wang Y, Wang X, Zhang Y, Li X, Duan H, Cao A (2016) Helical graphene oxide fibers as a stretchable sensor and an electrocapillary sucker. Nanoscale 8(20):10659–10668
Sekitani T, Nakajima H, Maeda H, Fukushima T, Aida T, Hata K, Someya T (2009) Stretchable active-matrix organic light-emitting diode display using printable elastic conductors. Nat Mater 8(6):494–499
Park M, Im J, Shin M, Min Y, Park J, Cho H, Park S, Shim MB, Jeon S, Chung DY (2012) Highly stretchable electric circuits from a composite material of silver nanoparticles and elastomeric fibres. Nat Nanotechnol 7(12):803–809
Wang X, Li T, Adams J, Yang J (2013) Transparent, stretchable, carbon-nanotube-inlaid conductors enabled by standard replication technology for capacitive pressure, strain and touch sensors. J Mater Chem A 1(11):3580–3586
Li G, Wu X, Lee DW (2016) A galinstan-based inkjet printing system for highly stretchable electronics with self-healing capability. Lab Chip 16(8):1366–1373
Lu T, Finkenauer L, Wissman J, Majidi C (2014) Rapid prototyping for soft-matter electronics. Adv Func Mater 24(22):3351–3356
Vogt DM, Park YL, Wood RJ (2013) Design and characterization of a soft multi-axis force sensor using embedded microfluidic channels. IEEE Sens J 13(10):4056–4064
Vural M, Behrens AM, Ayyub OB, Ayoub JJ, Kofinas P (2015) Sprayable elastic conductors based on block copolymer silver nanoparticle composites. ACS Nano 9(1):336–344
Mosadegh B, Xiong G, Dunham S, Min JK (2015) Current progress in 3D printing for cardiovascular tissue engineering. Biomed Mater 10(3):034002
Kong YL, Tamargo IA, Kim H, Johnson BN, Gupta MK, Koh TW, Chin HA, Steingart DA, Rand BP, McAlpine MC (2014) 3D printed quantum dot light-emitting diodes. Nano Lett 14(12):7017–7023
Burns A, Greene BR, McGrath MJ et al (2010) SHIMMER™—a wireless sensor platform for noninvasive biomedical research. IEEE Sens J 10(9):1527–1534
Guan L, Nilghaz A, Su B et al (2016) Stretchable-fiber-confined wetting conductive liquids as wearable human health monitors. Adv Func Mater 26(25):4511–4517
Jung S, Hong S, Kim J et al (2015) Wearable fall detector using integrated sensors and energy devices. Sci Rep 5:17081
Xie K, Zhang S, Dong S et al (2017) Portable wireless electrocorticography system with a flexible microelectrodes array for epilepsy treatment. Sci Rep 7(1):7808
Acknowledgements
This research was partially supported by National Natural Science Foundation of China (61803364, U1713219), Shenzhen Fundamental Research Project (JCYJ20170307165039508), the Key Deployment Project of Chinese Academy of Sciences (Grant No. KFZD-SW-214), and SIAT Innovation Program for Excellent Young Researchers (Grant No. 2016053).
Author information
Authors and Affiliations
Corresponding authors
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Rights and permissions
About this article
Cite this article
Gao, Q., Zhang, J., Xie, Z. et al. Highly stretchable sensors for wearable biomedical applications. J Mater Sci 54, 5187–5223 (2019). https://doi.org/10.1007/s10853-018-3171-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10853-018-3171-x