Abstract
Two fracture criteria are proposed and applied to blunt-notched components made of brittle materials loaded under mixed mode; the former is based on the averaged strain energy density over a given control volume, the latter on the cohesive crack zone model. In both instances use of the equivalent local mode I hypothesis is made. Only two material properties are needed: the ultimate tensile strength and the fracture toughness. Numerical predictions of rupture loads from the two criteria are compared with experimental measurements from more than 160 static tests with notched beams. The samples are made of PMMA and tested at − 60°C to assure a bulk behaviour almost linear elastic up to rupture. Notch root radii range from 0.2 to 4.0 mm and load mixicity varies from pure mode I to a prevailing mode II. The good agreement between theory and experimental results adds further confidence to the proposed fracture criteria.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Atzori B, Lazzarin P (2001) Notch sensitivity and defect sensitivity: two sides of the same medal. Int J Fract 107(1): L3–L8
Atzori B, Lazzarin P, Meneghetti G (2003) Fracture mechanics and notch sensitivity. Fatigue Fract Eng Mater Struct 26: 257–267
Atzori B, Lazzarin P, Meneghetti G (2005) Unified treatment of fatigue limit of components weakened by notches and defects subjected to prevailing mode I stresses. Int J Fract 133: 61–87
Barenblatt GI (1962) The mathematical theory of equilibrium of cracks in brittle fracture. Adv Appl Mech 7: 55–129
Bažant ZP, Planas J (1998) Fracture and size effect in concrete and other quasibrittle materials. CRC Press, Boca Raton and London
Berto F, Lazzarin P (2007) Relationships between J-integral and the strain energy evaluated in a finite volume surrounding the tip of sharp and blunt V-notches. Int J Solids Struct 44: 4621–4645
Berto F, Lazzarin P, Matvienko YUG (2007) J-integral evaluation for U- and V-blunt notches under Mode I loading and materials obeying a power hardening law. Int J Fract 146: 33–51
Budiansky B, Rice JR (1973) Conservation laws and energy-release rate. J Appl Mech 40: 201–203
Carpinteri A (1987) Stress singularity and generalised fracture toughness at the vertex of re-entrant corners. Eng Fract Mech 26: 143–155
Chen YH, Lu TJ (2004) On the path dependence of the J-integral in notch problems. Int J Solids Struct 41: 607–618
Creager M, Paris PC (1967) Elastic field equations for blunt cracks with reference to stress corrosion cracking. Int J Fract Mech 3: 247–252
Czoboly E, Havas I, Gillemot F (1982) The absorbed specific energy till fracture as a measure of the toughness of metals. In Sih GC, Czoboly E, Gillemot F (eds) Proceedings of international symposium on absorbed specific energy and/or strain energy density. Martinus Nijhoff, The Hague, pp 101–106
Dini D, Hills D (2004) Asymptotic characterisation of nearly-sharp notch root stress fields. Int J Fract 130: 651–666
Dugdale DS (1960) Yielding of steel sheets containing slits. J Mech Phys Solids 8: 100–108
El Haddad MH, Topper TH, Smith KN (1979) Prediction of non-propagating cracks. Eng Fract Mech 11: 573–584
Elices M, Guinea GV, Gómez FJ, Planas J (2002) The cohesive zone model: advantages, limitations and challenges. Eng Fract Mech 69: 137–163
Ellyin F (1997) Fatigue damage, crack growth and life prediction. Chapman & Hall, London
Ellyin F, Kujawski D (1989) Generalization of notch analysis and its extension to cyclic loading. Eng Fract Mech 32(5): 819–826
Erdogan F, Sih CG (1963) On the crack extension in plates under plane loading and transverse shear. J Basic Eng 519–525
Gdoutos EE (1990) Fracture mechanics criteria and applications. Kluwer Academic Publishers, Dodrecht
Gillemot EE (1965) Brittle fracture of welded materials. Commonwealth Welding Conference C 7: 353–358
Gillemot LF (1976) Criterion of crack initiation and spreading. Eng Fract Mech 8: 239–253
Gillemot LF, Czoboly E, Havas I (1985) Fracture mechanics applications of absorbed specific fracture energy: notch and unnotched specimens. Theor Appl Fract Mech 4: 39–45
Gogotsi GA (2003) Fracture toughness of ceramics and ceramic composites. Ceram Int 7: 777–884
Gómez FJ, Elices M (2003a) Fracture of components with V-shaped notches. Eng Fract Mech 70: 1913–1927
Gómez FJ, Elices M (2003b) A fracture criterion for sharp V-notched samples. Int J Fract 123: 163–175
Gómez FJ, Elices M (2004) A fracture criterion for blunted V-notched samples. Int J Fract 127: 239–264
Gómez FJ, Elices M, Valiente A (2000) Cracking in PMMA containing U-shaped notches. Fatigue Fract Eng Mat Struct 23: 795–803
Gómez FJ, Elices M, Planas J (2005) The cohesive crack concept: application to PMMA at − 60°C. Eng Fract Mech 72: 1268–1285
Gómez FJ, Elices M, Berto F, Lazzarin P (2007a) Local strain energy to asses the static failure of U-notches in plates under mixed mode loading. Int J Fract 145: 29–45
Gómez FJ, Elices M, Berto F, Lazzarin P (2007b) Fracture of U-notched specimens under mixed mode experimental results and numerical predictions. Eng Fract Mech (in press)
Hillerborg A, Modéer M, Petersson PE (1976) Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements. Cement Concrete Res 6: 773–782
Kipp ME, Sih GC (1975) The strain energy density failure criterion applied to notched elastic solids. Int J Solids Struct 11: 153–173
Knésl Z (1991) A criterion of V-notch stability. Int J Fract 48: R79–R83
Knowles JK, Sternberg E (1972) On a class of conservation laws in linearized and finite elastostatics. Arch Rational Mech Anal 44: 187–211
Lazzarin P, Tovo R (1996) A unified approach to the evaluation of linear elastic stress fields in the neighbourhood of cracks and notches. Int J Fract 78: 3–19
Lazzarin P, Zambardi R (2001) A finite-volume-energy based approach to predict the static and fatigue behaviour of components with sharp V-shaped notches. Int J Fract 112: 275–298
Lazzarin P, Berto F (2005a) Some expressions for the strain energy in a finite volume surrounding the root of blunt V-notches. Int J Fract 135: 161–185
Lazzarin P, Berto F (2005b) From Neuber’s elementary volume to Kitagawa and Atzori’s diagrams: an interpretation based on local energy. Int J Fract 135: L33–L38
Lazzarin P, Filippi S (2006) A generalised stress intensity factor to be applied to rounded V-shaped notches. Int J Solids Struct 43: 2461–2478
Lazzarin P, Berto F (2008) Control volumes and strain energy density under small and large scale yielding due to tension and torsion loading. Fatigue Fract Eng Mater Struct 31: 95–107
Lazzarin P, Lassen T, Livieri P (2003) A Notch Stress Intensity approach applied to fatigue life predictions of welded joints with different local toe geometry. Fatigue Fract Eng Mater Struct 26: 49–48
Lazzarin P, Sonsino CM, Zambardi R (2004) A notch stress intensity approach to predict the fatigue behaviour of T butt welds between tube and flange when subjected to in-phase bending and torsion loading. Fatigue Fract Eng Mater Struct 27: 127–141
Lazzarin P, Berto F, Radaj D (2006) Uniform fatigue strength of butt and fillet welded joints in terms of the local strain energy density. Proceedings 9th international fatigue congress, IFC9, Atlanta, USA (Organised by Elsevier). On CD Rom
Lazzarin P, Livieri P, Berto F, Zappalorto M (2008) Local strain energy density and fatigue strength of welded joints under uniaxial and multiaxial loading. Eng Fract Mech 75: 1875–1889
Leguillon D, Yosibash Z (2003) Crack onset at a V-notch influence of the notch tip radius. Int J Fract 122: 1–21
Leguillon D, Quesada D, Putot C, Martin E (2007) Prediction of crack initiation at blunt notches and cavities—size effects. Eng Fract Mech 74: 2420–2436
Livieri P (2008) Use of J-integral to predict static failures in sharp V-notches and rounded U-notches. Eng Fract Mech 75: 1779–1793
Livieri P, Lazzarin P (2005) Fatigue strength of steel and aluminium welded joints based on generalised stress intensity factors and local strain energy values. Int J Fract 133: 247–278
McClintock FA (1958) Ductile fracture instability in shear. J Appl Mech 25: 582–588
Neuber H (1958) Kerbspannungslehre. 2. Springer-Verlag, Berlin
Neuber H (1985) Kerbspannungslehre. 3. Springer-Verlag, Berlin
Novozhilov VV (1969) On necessary and sufficient criterion of brittle fracture. Prikladnaja Matematika i Mechanika 33: 212–222
Nui LS, Chehimi C, Pluvinage G (1994) Stress field near a large blunted tip V-Notch and application of the concept of the critical notch stress intensity factor (NSIF) to the fracture toughness of very brittle materials. Eng Fract Mech 49: 325–335
Papadopoulos GA, Paniridis PI (1988) Crack initiation from blunt notches under biaxial loading. Eng Fract Mech 31(1): 65–78
Planas J, Sancho JM (2007) Computational Orientated Finite Elements. COFE. Internal report. JP0501. Departamento de Ciencia de los Materiales. Universidad Politécnica de Madrid
Priel E, Bussiba A, Gilad I, Yosibash Z (2007) Mixed mode failure criteria for brittle elastic V-notched structures. Int J Fract 144: 247–265
Rice JR (1968) A path independent integral and the approximate analysis of strain concentration by notches and cracks. J Appl Mech 35: 379–386
Ritchie RO, Knott JF, Rice JR (1973) On the relation between critical tensile stress in fracture toughness in mild steel. J Mech Phys Solids 21: 395–410
Sancho JM, Planas J, Cendón DA, Reyes E, Gálvez JC (2007) An embedded crack model for finite element analysis of concrete fracture. Eng Fract Mech 74: 75–86
Seweryn A (1994) Brittle fracture criterion for structures with sharp notches. Eng Fract Mech 47: 673–681
Seweryn A, Mróz Z (1995) A non-local stress failure condition for structural elements under multiaxial loading. Eng Fract Mech 51: 955–973
Seweryn A, Lucaszewicz A (2002) Verification of brittle fracture criteria for elements with V-shaped notches. Eng Fract Mech 69: 1487–1510
Seweryn A, Poskrobko S, Mróz Z (1997) Brittle fracture in plane elements with sharp notches under mixed-mode loading. J Eng Mech 123: 535–543
Sheppard SD (1991) Field effects in fatigue crack initiation: long life fatigue strength. Trans ASME J Mech Design 113: 188–194
Sih GC (1973) A special theory of crack propagation. In: Sih GC(eds) Methods of analysis and solutions of crack problems. Noordhoff, International Publishing, Leyden, pp 21–45
Sih GC (1974a) Strain-energy-density factor applied to mixed mode crack problems. Int J Fract 10: 305–321
Sih GC (1974b) Surface layer energy and strain energy density for a blunted crack or notch. In: Sih GC, van Elst HC, Broek D(eds) Prospect of fracture mechanics. Noordhoff International Publishing, Leyden, pp 85–102
Sih GC (1991) Mechanics of fracture initiation and propagation: surface and volume energy density applied as failure criterion. Kluwer Academic Publisher, Dordrecht
Strandberg M (2002) Fracture at V-notches with contained plasticity. Eng Fract Mech 69: 403–415
Taylor D (2004) Predicting the fracture strength of ceramic materials using the theory of critical distances. Eng Fract Mech 71: 2407–2416
Yosibash Z, Bussiba Ar, Gilad I (2004) Failure criteria for brittle elastic materials. Int J Fract 125: 307–333
Yosibash Z, Priel E, Leguillon D (2006) A failure criterion for brittle elastic materials under mixed-mode loading. Int J Fract 141: 291–312
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Berto, F., Lazzarin, P., Gómez, F.J. et al. Fracture assessment of U-notches under mixed mode loading: two procedures based on the ‘equivalent local mode I’ concept. Int J Fract 148, 415–433 (2007). https://doi.org/10.1007/s10704-008-9213-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10704-008-9213-7