Abstract
Iran imports nearly 55,000 tons of Chrysotile asbestos per year and asbestos cement (AC) plants contribute nearly 94% of the total national usage. In the present study, airborne asbestos concentrations during AC sheet manufacturing were measured. The fiber type and its chemical composition were also evaluated by scanning electron microscopy (SEM), with energy-dispersive X-ray analysis. Airborne total fiber concentrations of 45 personal samples were analyzed by phase contrast microscopy. The results have highlighted that 15.5% of samples exceed the threshold limit value (TLV) established the American Conference of Governmental Industrial Hygienists, which is 0.1 fiber per milliliter (f/ml). Personal monitoring of asbestos fiber levels indicated a ranged from 0.02 ± 0.01 to 0.16 ± 0.03 f/ml. The geometrical mean was 0.05 ± 1.36 f/ml, which is considerably lower than the TLV. SEM data demonstrate that the fibrous particles consisted, approximately, of Chrysotile (55.89%) and amphiboles (44.11%). We conclude that the industrial consumption of imported Chrysotile asbestos is responsible for the high airborne amphibole asbestos levels in the AC sheet industry. More research is needed to improve characterization of occupational exposures by fiber size and concentration in a variety of industries.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
ACGIH American Conference of Governmental Industrial Hygienists (2008). Threshold limit values for chemical substances and physical agents and biological indices. Cincinnati: ACGIH.
AIA Asbestos International Association (1984). Method for the determination of airborne asbestos fibers and other inorganic fibers by scanning electron microscopy. London: AIA Health and Safety, Publ RTM no 2. AIA.
Ansari, F. A., Bihari, V., Rastogi, S. K., Ashquin, M., & Ahmad, I. (2007). Environmental health survey in asbestos cement sheets manufacturing industry. Indian Journal of Occupational and Environmental Medicine, 11(1), 15–20.
Dement, J. M., & Wallingford, K. M. (1990). Comparison of phase contrast and electron microscopic methods for evaluation of occupational asbestos exposures. Applied Occupational Hygiene, 5, 242–247.
Goldberg, M., Banaei, A., Goldberg, S., Auvert, B., Luce, D., & Gueguen, A. (2000). Past occupational exposure to asbestos among men in France. Scand Journal Work Environmental Health, 26, 52–61.
Gunter, M. E., Sanchez, M. S., & Williams, T. J. (2007). Characterization of chrysotile samples for the presence of amphiboles: The Carey Canadian Deposit, Southeastern Quebec, Canada. Canadian Mineralogist, 42(2), 263–280.
Kakooei, H., & Marioryad, H. (2010). Evaluation of exposure to the airborne asbestos in an automobile brake and clutch manufacturing industry in Iran. Regular Toxicology and Pharmacology, 2, 234–245.
Kakooei, H., Sameti, M., & Kakooei, A. A. (2007). Asbestos exposure during routine brake lining manufacture. Industrial health, 45, 787–792.
Kakooei, H., Yunesian, M., Marioryad, H., & Azam, K. (2009). Assessment of airborne asbestos fiber concentrations in urban area of Tehran, Iran. Air Qualifications Atmospheric Health, 2, 39–45.
Lippmann, M. (1988). Asbestos exposure indices. Environmental Research, 45, 86–106.
McDonald, A. D., Case, B. W., Churg, A., Dufresne, A., Gibbs, G. W., Sebastien, P., et al. (1997). Mesothelioma in Quebec chrysotile miners and millers: Epidemiology and etiology. Annals Occupational Hygiene, 41, 407–719.
Nicholson, W., Landrigan, P. J. (1994). Asbestos: A status report. Current Issues Public Health, 2, 118–123.
NIOSH National Institute for Occupational Safety and Health (1989). Method 7400: Fibers. In: NIOSH manual of analytical methods, (3rd edn). Cincinnati: U.S. Department of Health, Education and Welfare.
Phanprasit, W., Sujirarat, D., Chaikittiporn, C. (2009). Health risk among asbestos cement sheet manufacturing workers in Thailand. Journal of the Medical Association of Thailand, 7(S), 115–120.
Stayner, L., Dankovic, D. A., Lemen, R. A. (1996). Occupational exposure to chrysotile asbestos and cancer risk: a review of the amphibole hypothesis. American Journal Public Health, 86(2), 179–186
Sudhir, K. D., & William, S. B. (2010). Occupational asbestos exposure and predictable asbestos-related diseases in India. American Journal of Industrial Medicine, 48(2), 137–143.
Sullivan, J. B., & Krieger, G. R. (2001). Clinical environmental health and toxic exposures. Baltimore: Lippincott Williams &Wilkins.
Tossavainen, A., Kotilainen, M., Takahashi, K., Pan, G. & Vanhala, E. (2001). Amphibole fibers in Chinese chrysotile asbestos. Annals Occupational Hygiene, 45(2), 145–152.
Weir, F. W., Meraz, L. B. (2001). Morphological characteristics of asbestos fibers released during grinding and drilling of friction products. Applied Occupational Environmental Hygiene, 16, 1147–1149.
Yano, E., Wang, Z. M., Wang, X. R., Wang, M. Z., & Lan, Y. J. (2001). Cancer mortality among workers exposed to amphibole-free chrysotile asbestos. American Journal Epidemiology, 145, 538–543.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Panahi, D., Kakooei, H., Marioryad, H. et al. Evaluation of exposure to the airborne asbestos in an asbestos cement sheet manufacturing industry in Iran. Environ Monit Assess 178, 449–454 (2011). https://doi.org/10.1007/s10661-010-1703-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10661-010-1703-1