Abstract
Agbogbloshie in Accra, Ghana, was a center for informal e-waste recycling until it was closed recently. This study investigated the potential health risks of toxic metals (including As, Cd, Cu, Ni, Pb, Sb, and Zn) found in the surface soils based on their concentrations and in vitro bioaccessibility. Mean concentrations at the burning sites were As: 218; Cd: 65; Cr: 182; Cu: 15,841; Ni: 145; Pb: 6,106; Sb: 552; and Zn: 16,065 mg/kg while the dismantling sites had mean concentrations of As: 23; Cd: 38; Cr: 342; Cu: 3239; Ni: 96; Pb: 681; Sb: 104; and Zn: 1658 mg/kg. The findings confirmed the enrichment of potentially toxic metals at the dismantling and burning sites, exceeding international environmental soil quality guidelines. Based on the total metal concentrations, bioaccessibility, and calculated risk indices, the risks associated with incidental ingestion of soil-borne metal contaminants at the dismantling and burning sites were very high. Despite evidence of higher metal concentrations in the communities near the burning and dismantling sites, the human health risk associated with soil ingestion was significantly lower in the surrounding neighborhood.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
Introduction
Electronic and electrical waste (e-waste), such as discarded televisions, computers, laptops, portable phones, and refrigerators, is the fastest-growing domestic waste stream in the world (Amponsah, Sørensen, et al., 2022a, b; Shittu et al., 2021). This is attributed mainly to the high use of electronic and electrical equipment that either generally becomes obsolete in a few years or are not easily repairable (Forti et al., 2020). According to the Global E-Waste Monitor (2020), of the 53.6 million metric tons of e-waste generated in 2019, only 17.4% was collected and recycled properly (Forti et al., 2020). A portion of the unaccounted-for waste ends up in the informal recycling stream. Electrical and electronic equipment contain various metals and metalloids that were used in their manufacture. Informal recycling involves the mechanical dismantling of the equipment to reclaim valuable visible metal components (e.g., Al, Cu and Fe) followed by open burning or acidic leaching to recover the remaining invisible metals in the dismantled pieces (e.g., Ag, Al, Au, Cu, Pd) (Forti et al., 2020). Mechanical dismantling, open burning and disposal of leachate can potentially introduce various metals and metalloids including As, Cd, Co, Cr, Cu, Ni, Sb, and Zn into the environment (Ackah, 2019; Adesokan et al., 2016; Amponsah et al., 2022a, b; Cao et al., 2020; Han et al., 2019; Ouabo et al., 2019; Singh et al., 2018).
Until recently Agbogbloshie, a suburb in Accra, Ghana was used as an informal e-waste recycling site. Prior to their relocation in 2021, the population of the study area was approximately 30,000 (Amoyaw-Osei & Agyekum, 2011). Agbogbloshie is situated near the Odaw River less than 1 km from the central business district of Accra. It was used as a scrap yard for e-waste and other materials including obsolete computers, monitors, refrigerators, television sets, used batteries, vehicles, and sheathed cables (Ackah, 2019). These wastes were manually dismantled at numerous small workshops scattered across the site to retrieve recoverable materials such as copper cables and precious metals. Printed circuit boards, capacitors, sheathed cables, and tires were openly burnt at designated burning sites often resulting in thick dark smoke. These activities resulted in the contamination of soils at the burning areas and dismantling sites. Earlier studies at the burning areas showed elevated levels of metals and metalloids (Vaccari et al., 2019). Other studies (Ackah, 2019; Cao et al., 2020) also confirmed soils in burning areas contain metals such as As, Cd, Cu, Pb, and Zn at levels that far exceeded international environmental soil quality guidelines such as the Dutch Target and Intervention Values (VROM, 2000) and the Canadian Council of Ministers of the Environment (CCME) guidelines (CCME, 2007).
Humans are exposed to the metal and metalloid contaminants incorporated into soils through either ingestion or inhalation of the contaminated soils or dermal contact with the soils (Darko, Dodd, Nkansah, Aduse-Poku, et al., 2017a, b). The human health effects resulting from exposure are metal-dependent. For example, inorganic arsenic is a known human carcinogen and chronic exposure can cause a decrease in the production of red and white blood cells, abnormal heart rhythm and damage to blood vessels while inorganic lead is a probable human carcinogen that affects every organ system (US-EPA, 2002). Although copper and zinc are essential elements, exposure to high doses of copper or zinc can result in gastrointestinal irritation (ATSDR, 2014, 2022; Fosmire, 1990; Taylor et al., 2020).
In human health risk assessments of metal contaminants in soils, oral ingestion is the predominant mode of exposure for the general population albeit workers who dismantle and burn e-waste may also be exposed through the inhalation of smoke and dust particles as well as dermal contact. In vitro bioaccessibility (IVBA) which is the fraction of the total amount of the contaminant in a soil sample that dissolves in a simulated gastrointestinal fluid (US-EPA 2007a) provides a more realistic exposure scenario for the human health risk assessments (Basta & Juhasz, 2014; Health Canada, 2017).
Agbogbloshie (5°32′45.5"N; 0°13′27.2"W) is surrounded by several localities comprising Kaneshie, South Industrial Area, Abossey Okai, Kokomlele, Ussher Town and Korle Bu (Fig. 1) with various infrastructures such as residences, warehouses, company manufacturing sites, marketplace places, automobile repair shops, carpentry shops and a hospital. Although the presence of metals and metalloids at elevated concentrations at the burning and dismantling areas in Agbogbloshie that pose human health risks has been reported (Ackah, 2019; Cao et al., 2020; Vaccari et al., 2019), there is a lack of data on metal distribution in the surrounding neighborhood. This study was therefore conducted to determine the spatial distribution of metals and metalloids in surface soils in the vicinities of Agbogbloshie. The human health risk based on ingestion of these soil-borne metal contaminants at the dismantling areas, the burning sites and the surrounding neighborhood was determined by incorporating the concentrations of these metals and their in vitro bioaccessibility.
Methodology
Sample collection
Surface soil samples were collected at the dismantling sites (n = 11), burning areas (n = 14), and in the surrounding community (n = 64) in December 2020. Sampling points at the dismantling sites were along a linear grid while a judgmental approach based on the accessibility of soil was used to select locations at the dismantling site due to the debris scattered in the area. A global positioning system application (GPS Essentials, Malaga, Spain) was used to design a 300 m by 300 m grid for the surrounding community followed by sampling at the intersects. Sampling locations were shifted to the nearest accessible points for intersects with infrastructure (e.g., buildings, roads) that prevented surface soil sampling. A plastic scoop was used to collect the soil sample from the top 10 cm. The sampling locations are shown in Fig. 1. For background purposes, 12 samples were collected from the Legon Botanical Gardens, located about 18 km away from the Agbogbloshie scrapyard but has similar geological regimes. The Legon Botanical Gardens is a state botanical garden managed by the University of Ghana. Management includes conservation programs that place restrictions on patronage, and they are therefore considered free from human activities which may introduce heavy metals into the soil.
Sample preparation and analysis
Soil samples were air-dried at ambient temperatures and sieved using 250 µm polyethene sieves.
Metals in soil
The sieved soil samples were analyzed for metals using a Niton XL3t GOLDD + X-ray fluorescence (XRF) analyzer based on US-EPA Method 6200 (US-EPA, 2007b). The detection limits for the XRF analysis are included in Table 1. A certified standard reference material (NIST 2711a) was analyzed in triplicate for quality assurance. Thirteen of the samples (representing 13%) were analyzed by inductively coupled plasma-mass spectrometry, (ICP-MS) for confirmatory analysis. Prior to ICP-MS analysis, 1.0 g of the sample was added to a 50 mL digestion tube. Aliquots of 5 mL deionized water, 2.5 mL concentrated HCl and 2.5 mL concentrated HNO3 was added to the tube. The mixture was digested at 95 °C for 2 h in a heating block. The digestate was made to 40 mL with deionized water and centrifuged at 5000 g for 10 min. The resulting solution was stored at 4 °C and subsequently analyzed with an Agilent 7800 ICP-MS based on US-EPA method 6020B (Amponsah et al., 2022a, 2022b). The limit of detection for the ICP-MS analyses were Ag (< 0.4 mg/kg), As (< 0.3 mg/kg), Cd (0.1 mg/kg), Cr (< 1.6 mg/kg), Mo (< 0.8 mg/kg), Pb (< 0.4 mg/kg), Ni (< 0.8 mg/kg), Sb (< 0.4 mg/kg), Sn (< 1.6 mg/kg) and Zn (< 0.8 mg/kg). The data quality assurance/quality control (QA/QC) program included the analysis of NIST 2711a control samples and duplicates.
In vitro bioaccessibility
The in vitro bioaccessibility assay (IVBA) was based on US-EPA Method 1340 (US-EPA 2007a). A 1 g portion of the sieved soil was extracted by end-to-end rotation for 1 h in 100 mL of 30 g/L glycine adjusted to a pH of 1.5 with concentrated HCl. The extract was filtered and analyzed by ICP-MS as per the methodology used for the total metal analysis. Percent elemental bioaccessibility was calculated for each sample by dividing the concentration in the IVBA extract by the total elemental concentration as determined by acid digestion and ICP-MS analysis. Bioaccessibility was not calculated for the samples with extract concentrations below the limits of detection. The limit of detection for the extracts were Ag (< 1 µg/L), As (< 0.8 µg/L), Cd (0.2 µg/L), Cr (< 4 µg/L), Mo (< 2 µg/L), Pb (< 1 µg/L), Ni (< 2 µg/L), Sb (< 1.0 µg/L), Sn (< 4 µg/L) and Zn (< 2 µg/L). The QA/QC control program included the use of NIST 2711a control samples, procedure and reagent blanks, and duplicates to ensure reproducibility and minimal contamination from filters, vessels, and sample containers.
Statistical analysis and data evaluation
Statistical analyses were performed using Excel and R software. Since much of the data consisted of results below the limit of detection, Kaplan–Meier statistical techniques for censored environmental data, were used at the 95% confidence limit (Helsel, 2011). In particular, the R package NADA2 (Julian & Helsel, 2022) was utilized for most analyses.
The data was evaluated using international environmental soil quality guidelines since there are currently no Ghanaian soil quality standards. The Canadian Council of Ministers of the Environment (CCME) soil quality guidelines (CCME, 2007) and the Dutch Intervention Values (VROM, 2000) were selected based on their use in other studies conducted in Ghana (Ackah, 2019; Amponsah et al., 2022a, b; Cao et al., 2020). The land use scenario in Agbogbloshie and the surrounding neighborhood included residential, commercial, and industrial and as such the more conservative CCME guideline for residential land use was used for data evaluation.
The potential impact of e-waste on metal concentrations in the receiving environment was evaluated using an enrichment factor while the geoaccumulation index was used to assess the level of pollution (Kowalska et al., 2018). The enrichment factor (EF) was calculated as follows:
where Ms and Fes are the concentrations of metal and Fe in the soil sample while Mb and Feb are the relevant background concentrations of the metal and Fe. The Mb for this study was estimated from the mean concentration of the element in 12 control samples collected from Legon Botanical Gardens. An EF < 2 indicates deficiency to minimal enrichment; 2–5 moderate enrichment; 5–20 implies significant enrichment; 20–40 implies very high enrichment; and > 40 extremely high enrichment (Kowalska et al., 2018).
The geoaccumulation index (Igeo) was calculated using Eq. 2:
The Igeo data was evaluated using the following descriptive classes: ≤ 0 = unpolluted; 0–1 = unpolluted to moderately polluted; 1–2 = moderately polluted; 2–3 = moderately to highly polluted; 3–4 = highly polluted; 4–5 = highly to extremely high polluted; and 5–6 extremely high polluted (Kowalska et al., 2018).
Human health risk assessment
Although workers who dismantle and burn e-waste may be exposed to the soil-borne contaminants through incidental ingestion, the inhalation of smoke and dust particles as well as dermal contact, it is assumed that ingestion is the predominant mode of exposure for the general population. The human health risk assessment (HHRA) was therefore conducted for the oral exposure pathway only incorporating bioaccessibility as a surrogate for oral bioavailability. The risk was estimated using the hazard index (HI) and carcinogenic risk (CR) method. The chemical daily intake (CDI) (mg kg−1 day−1) was calculated using the Eq. 3 (Health Canada, 2017):
where: Msoil = concentration of metal in soil (mg/kg)
IngR = soil ingestion rate set as 0.0004 kg/day for a child and 0.0001 kg/day for adult (US-EPA, 2007a)
ET = exposure term (unitless) = days/week × weeks/year (× years for carcinogens)
BW = body weight (kg) set as 30 kg for children and 70 kg for adults (WHO, 2021)
LE = life expectancy (years) to be employed for assessments of carcinogens only set as 64 years (World Bank, 2020).
The CDI was divided by the tolerable daily intake (TDI) (mg kg−1 d−1) and adjusted for relative bioavailability (RBA) to obtain the hazard quotient (HQ) for non-cancer risk (Eq. 4).
The RBA for arsenic and lead were determined from the bioaccessibility values (IVBA) using Eqs. (5) and (6), respectively (US-EPA, 2002).
Due to the lack of in vivo/in vitro equations for the remaining metals, their bioaccessibility values were used directly as the surrogate for the RBA.
The TDI values used were Ag: 0.005 mg kg−1 d−1; As: 0.0003 mg kg−1 d−1; Cd: 0.0005 mg kg−1 d−1; Cr: 0.003 mg kg−1 d−1; Cu: 0.01 mg kg−1 d−1; Mo: 0.005 mg kg−1 d−1; Ni; 0.02 mg kg−1 d−1; Pb: 0.0036 mg kg−1 d−1; Sb: 0.0005 mg kg−1 d−1; Sn 0.6 mg kg−1 d−1; and Zn: 0.3 mg kg−1 d−1 (Cao et al., 2020; Health Canada, 2008). The HQ for the individual metals (HQi) were summed to obtain the overall hazard index (HI) (Eq. 7).
In this study, the HI represents the sum of the hazard quotients for Ag, As, Cd, Cr, Cu, Mo, Ni, Pb, Sb, Sn, and Zn. HI > 1 implies an elevated probability of non-carcinogenic effects occurring.
Carcinogenic risk (CR) was determined for arsenic only using the Eq. 8:
where CSF is the cancer slope factor (1.8 mg kg−1 d−1 for As) (Santé Canada, 2008).
Results and discussion
Statistical summary of metals data
Analysis of soils by XRF yielded results for a suite of 33 elements: Ag, As, Au, Ba, Ca, Cd, Co, Cr, Cs, Cu, Fe, Hg, K, Mn, Mo, Ni, Pb, Pd, Rb, S, Sb, Sc, Se, Sn, Sr, Te, Th, Ti, U, V, W, Zn, Zr. The non-metallic element, S, and the major elements (Ca, K, and Ti) were excluded from further analysis. For Co, Hg, U, and W most of the results were below the limit of detection and these metals were also removed from further analysis. Summary Statistics for the XRF soil metal results are presented in Table 1. For censored data, Kaplan–Meier techniques were used at the 95% confidence limit.
To test for a significant difference in means among the three site groupings (Community, Dismantling, and Burning), a pairwise comparison using a Peto and Peto test was carried out for each metal. There were no strong differences by the site for Ba, Ce, Sr, and Te; these metals were removed from further analysis. The remaining 12 toxicologically significant metals were chosen for further treatment and discussion. The elements were evaluated by comparing the mean concentrations for the three site groupings to the CCME guideline for residential land use (CCME, 2007) and the Dutch Intervention values (VROM, 2000). The mean concentrations of the elements As, Cd, Cr, Cu, Mo, Ni, Pb, Sb, and Zn in the Burning and Dismantling areas far exceeded the CCME guideline for residential land use. Except for Cr, the mean concentrations also exceeded the Dutch Intervention values (VROM, 2000).
Comparison between XRF and ICP-MS data
US-EPA method 6200 requires confirmatory analysis using other techniques such as ICP-MS (US-EPA, 2007a, b). Although previous studies have shown good comparability between the XRF and ICP-MS methodologies used in this study (Amponsah et al., 2022a, b; Darko, Dodd, Nkansah, Ansah, et al., 2017a, b), 13 samples were analyzed using both methods for confirmation. The regression parameters obtained (Table 2) indicated good comparability for the two techniques for most of the metals with R2 values between 0.62 and 0.99 except for As, Cd, and Cr. The poor comparability for these three elements was probably due to concentration effects, with the XRF yielding relatively high detection limits compared to the ICP-MS. Albeit, the recoveries for the NIST 2711a SRM were Ag (95%), As (96%), Cd (89%), Cr (89%), Cu (83%), Fe (85%), Ni (101%), Pb (93%), Sb (75%), and Zn (91%) which were all within the control limits.
Comparison of data to other e-waste sites
The mean elemental concentrations for samples collected from the Burning Area in this study were generally consistent with previous data for Agbogbloshie and other e-waste sites in Ghana and West Africa (Table 3) as well as e-waste sites in Qingyuan and Guiyu, China (Han et al., 2019) and Moradabad, India (Singh et al., 2018). However, Cu, Pb, and Zn concentrations in the Burning Area were higher than any values previously detected. The data thus confirmed the presence of elevated levels of potentially toxic elements at the Agbogbloshie e-waste burning and dismantling areas.
Pollution indices
The Igeo values (Fig. 2) corroborated the presence of the elevated levels of metals at both the dismantling area and the Burning Area with the soils at the Burning Area showing high to extreme pollution with As, Cu, Pb, Sb, Sn, and Zn. This observation was also confirmed by extremely high enrichment factors for these elements (Fig. 3).
Elemental distribution at Agbogbloshie and the surrounding community
Elemental distribution at the Burning, Dismantling, and Community were explored further through boxplots (Fig. 4). The median concentrations for Ag, Au, and Mo followed the order Community < Burning < Dismantling suggesting the Dismantling area may be introducing these contaminants into the environment. On the other hand, the median concentrations of Cd, Cu, Ni, Pb, Sb, Sn, and Zn were relatively higher in the Burning Area and followed the order Community < Dismantling < Burning. It appears the burning of e-waste and other debris contributed to the increase of these elements in the environment. The distribution of Cr was different in that the median concentrations followed the order Burning < Community < Dismantling.
Despite the significant differences between concentrations for these elements in the community vs the burning and dismantling areas, there were no strong correlations with the distance of the community sampling site from the burning or dismantling sites. Weak correlations were observed for Cu (p = 0.04, distance to burning site; p = 0.05 distance to dismantling site), Ni (p = 0.03, distance to dismantling site), Sb (p = 0.04, distance to dismantling site), and As (p = 0.03, distance to burning site) lending some support for off-site migration to the community from the recycling areas.
Contour plots of the concentrations of Cu, Ni, Pb, Sb, Sn, and Zn showed clear increases in concentration closer to the burning and dismantling sites (Fig. 5). These observations corroborate the suggestion that activities at the e-waste recycling area may be contributing to elevated elemental levels in the surrounding community.
Principal component analysis and correlation between elements
The relationships between the elements were explored using correlation analysis. Except for Cr, there was a high positive correlation among the elements at Agbogbloshie as shown in the heat map in Fig. 6. For instance, As correlated highly with Cu, Pb, Sb, and Sn with coefficients of 0.93, 0.95, 0.897, and 0.905 (p < 0.001), respectively. The high positive and significant correlations between the elements suggest that they accumulated from similar sources (i.e., dismantling and burning of e-waste and other materials at Agbogbloshie). Although the relationships were not statistically significant, Cr concentration decreased as As, Cu, Pb, Sb, and Sn increased in the soil at Agbogbloshie (i.e., Cr contamination may originate from a different source).
Principal component analysis was performed to further explore the sources of elemental concentration (Table 4). Eigenvalues > 1 were only considered for interpreting the results. Three principal components (PC) were identified which collectively accounted for 85.2% of the overall variation using varimax rotation. The PC1 constituted by As, Cd, Cu, Pb, Sb, and Sn explained 50.8% of the overall variance, and PC2 constituted by Ag, Au, Cd, Cr, and Mo contributed 22.0% of the total variance. Chromium, Ni and Zn constituted PC3 and accounted for 12.4% of the variance. The PC1 indicated metals are sourced from the same activity (the burning of e-waste) while the metals associated with PC2 were attributed to the dismantling activities. The metals associated with PC3 (Cr, Ni, and Zn) may be attributed to natural enrichment and other industrial activities such as scrap metal dealerships in the vicinities of the Agbogbloshie e-waste recycling site. The considerably high degree of contamination, coupled with the tendency for contaminants to be spatially autocorrelated and the random variation in contamination factors all suggest that the pollution is caused by anthropogenic activity, i.e., the e-waste recycling activity.
Bioaccessibility and human health risk assessment
The statistical summary for As, Cr, Cu, Pb, Ni, and Zn in vitro bioaccessibility is presented in Table 5. Bioaccessibility was not calculated for the remaining metals since their concentrations in most of the extracts were below the limits of detection. Bioaccessibility was variable among the metals with mean values in the order Pb > Cu > Zn > Ni > As > Cr. This order is similar to that obtained for soil samples collected from an e-waste site recycling site at Dagomba Line, Ghana (Amponsah et al., 2022a, 2022b). Lead bioaccessibility which varied from 51.3 to 91.9% was comparable to the range of 49.0–90.2% reported for Dagomba Line but higher than the 6.7–56% previously reported for the gastric phase bioaccessibility for e-waste burning sites in Agbogbloshie (Cao et al., 2020). Arsenic bioaccessibility values (12.4–41.6%) were also comparable to the values obtained for Dagomba Line (4.1–21.1) and Agbogbloshie (2.1–39.8%). The As and Pb bioaccessibility values were adjusted for the RBA using their respective in vivo/in vitro regression equations (Eqs. 5 and 6) and subsequently used for calculating the hazard quotients (Eq. 4). The bioaccessibility values of Ag, Cr, Cu, Ni, and Zn were used directly due to the lack of suitable in vivo/in vitro equations. For the remaining elements (Cd, Mo, Sb, and Sn) whose bioaccessibility values were not calculated due to the concentrations in the extracts being below detection, an RBA of 1 was used in Eq. 4.
The non-carcinogenic hazard indices for adults and children receptors represent the sum of the hazard quotients for Ag, As, Cd, Cr, Cu, Mo, Ni, Pb, Sb, Sn, and Zn for each of the sampling locations are summarized in Fig. 7. For adults, unacceptable levels of non-carcinogenic effects (HI > 1) were noted for 8 of the 14 samples collected from the Burning Area while all the samples collected from the Dismantling Area and the Surrounding Community had HI below 1. The non-carcinogenic risk for children was much higher with 10 samples from the burning area, 6 samples from the Dismantling Area and 1 sample from the Surrounding Community with HI > 1. The single sample in the Surrounding Community that had a high HI was collected near a Mechanic/Fuel Station; the elevated risk may be associated with activities at this point source. As with previous investigations at Agbogbloshie and other e-waste sites (Amponsah et al., 2022a, b; Cao et al., 2020; Leung et al., 2008), Pb and Cu were the leading contributors to the elevated human health risk via oral ingestion.
The cancer risk for As for adults was greater than 1 × 10−5 at 11 out of the 14 sites as shown in Fig. 8. This represented an unacceptable risk based on Canadian guidelines that the acceptable risk is one excess cancer death per 100,000 people exposed (Health Canada, 2004). All samples from the Surrounding Community and the Dismantling area had As cancer risk that was lower than 1 × 10–6 indicating that there were no carcinogenic adverse health risks for adults.
Conclusion
The distribution, bioaccessibility, and potential health risks associated with toxic metals in surface soils of Agbogbloshie and its surrounding communities were determined. Agbogbloshie is a hotspot for informal e-waste recycling activities, thus, concentrations of metals such as As, Cd, Cr, Cu, Mo, Ni, Pb, Sb, Sn, and Zn were found to exceed international environmental soil quality guidelines. Although lower concentrations were recorded in the surrounding communities, concentrations of Cd, Cr, Cu, Sb, and Zn at certain locations exceeded soil quality guidelines for residential land use. The metals including Ag, Cu, Pb, Ni, and Zn were highly bioaccessible. Even though bioaccessibility was considered in calculating human health risks, non-carcinogenic, and cancer risks were found at unacceptable levels in the e-waste recycling site. Results from this study show that human activities at the Agbogbloshie recycling site could potentially lead to adverse human health and ecological effects in the surrounding communities.
Availability of data and materials
All data generated or analyzed during this study are included in this published article.
References
Ackah, M. (2019). Soil elemental concentrations, geoaccumulation index, non-carcinogenic and carcinogenic risks in functional areas of an informal e-waste recycling area in Accra, Ghana. Chemosphere, 235, 908–917. https://doi.org/10.1016/j.chemosphere.2019.07.014
Adesokan, M. D., Adie, G. U., & Osibanjo, O. (2016). Soil pollution by toxic metals near E-waste recycling operations in Ibadan, Nigeria. Journal of Health and Pollution, 6(11), 26–33. https://doi.org/10.5696/2156-9614-6-11.26
Amoyaw-Osei, Y., & Agyekum, O. O. (2011). Ghana e-waste country assessment. SBC e-waste Africa Project, (March), 1–123.
Amponsah, L. O., Dodd, M., & Darko, G. (2022a). Gastric bioaccessibility and human health risks associated with soil metal exposure via ingestion at an E-waste recycling site in Kumasi, Ghana. Environmental Geochemistry and Health, 44(2), 497–509. https://doi.org/10.1007/s10653-020-00760-7
Amponsah, L. O., Sørensen, P. B., Nkansah, M. A., Vorkamp, K., Yevugah, L. L., & Darko, G. (2022b). Mercury contamination of two e-waste recycling sites in Ghana: an investigation into mercury pollution at Dagomba Line (Kumasi) and Agbogbloshie (Accra). Environmental Geochemistry and Health, (0123456789). https://doi.org/10.1007/s10653-022-01295-9
ATSDR. (2014). Toxicological profile for zinc. https://wwwn.cdc.gov/TSP/ToxProfiles/ToxProfiles.aspx?id=302&tid=54. Accessed 27 May 2022
ATSDR (2022). Toxocological profile for copper. https://wwwn.cdc.gov/TSP/ToxProfiles/ToxProfiles.aspx?id=206&tid=37 Accessed December 2022.
Basta, N. T., & Juhasz, A. (2014). Using In vivo bioavailability and/or In vitro gastrointestinal bioaccessibility testing to adjust human exposure to arsenic from soil ingestion. Arsenic: Environmental Geochemistry, Mineralogy, and Microbiology, 79, 451–472. https://doi.org/10.2138/rmg.2014.79.9
Cao, P., Fujimori, T., Juhasz, A., Takaoka, M., & Oshita, K. (2020). Bioaccessibility and human health risk assessment of metal(loid)s in soil from an e-waste open burning site in Agbogbloshie, Accra, Ghana. Chemosphere, 240, 124909. https://doi.org/10.1016/j.chemosphere.2019.124909
CCME. (2007). Canadian Soil Quality Guidelines for the Protection of Environmental and Human Health. Canadian Council of Ministers of the Environment.
Darko, G., Dodd, M., Nkansah, M. A., Ansah, E., & Aduse-Poku, Y. (2017b). Distribution and bioaccessibility of metals in urban soils of Kumasi, Ghana. Environmental Monitoring and Assessment, 189(6), 1–13. https://doi.org/10.1007/s10661-017-5972-9
Darko, G., Dodd, M., Nkansah, M. A., Aduse-Poku, Y., Ansah, E., Wemegah, D. D., & Borquaye, L. S. (2017a). Distribution and ecological risks of toxic metals in the topsoils in the Kumasi metropolis, Ghana. Cogent Environmental Science, 3(1). https://doi.org/10.1080/23311843.2017.1354965
Forti, V., Baldé, C. P., Kuehr, R., & Bel, G. (2020). The Global E-waste Monitor 2020: Quantities, Flows, and the Circular Economy Potential. United Nations University (UNU)/United Nations Institute for Training and Research (UNITAR)—co-hosted SCYCLE Programme, International Telecommunication Union (ITU) & International Solid Waste Association (ISWA), Bonn/Geneva/Rotterdam. https://collections.unu.edu/view/UNU:7737. Accessed 27 May 2022
Fosmire, G. J. (1990). Zinc toxicity. The American Journal of Clinical Nutrition, 51(2), 225–227. https://doi.org/10.1093/ajcn/51.2.225
Han, Y., Tang, Z., Sun, J., Xing, X., Zhang, M., & Cheng, J. (2019). Heavy metals in soil contaminated through e-waste processing activities in a recycling area: Implications for risk management. Process Safety and Environmental Protection, 125, 189–196. https://doi.org/10.1016/j.psep.2019.03.020
Health Canada (2004). Federal Contaminated Site Risk Assessment in Canada. Part I: Guidance on Human Health Preliminary Quantitative Risk Assessment (PQRA). Cat. H46-2/04-367E. ISBN 0-662–38244-7
Health Canada. (2008). Federal contaminated site risk assessment in Canada. Part IV: Spreadsheet tool for human health preliminary quantitative risk assessment (PQRA).
Health Canada (2017). Federal Contaminated Site Risk Assessment in Canada. Supplemental Guidance on Human Health Risk Assessment for Oral Bioavailability of Substances in Soil and Soil-Like Media.
Helsel, D. R. (2011). Statistics for Censored Environmental Data Using Minitab® and R: Second Edition. (M. Scott & V. Barnett, Eds.)Statistics for Censored Environmental Data Using Minitab® and R: Second Edition (Vol. 14). John Wiley & Sons, Inc. https://doi.org/10.1002/9781118162729
Julian, M. P. & Helsel, D.R. (2022). NADA2: Data Analysis for Censored Environmental Data. R package version 1.1.0. https://github.com/SwampThingPaul/NADA2 .
Kowalska, J. B., Mazurek, R., Gąsiorek, M., & Zaleski, T. (2018, December 1). Pollution indices as useful tools for the comprehensive evaluation of the degree of soil contamination—a review. Environmental Geochemistry and Health. Springer. https://doi.org/10.1007/s10653-018-0106-z
Leung, A. O. W., Duzgoren-Aydin, N. S., Cheung, K. C., & Wong, M. H. (2008). Heavy metals concentrations of surface dust from e-waste recycling and its human health implications in southeast China. Environmental Science and Technology, 42(7), 2674–2680. https://doi.org/10.1021/ES071873X/SUPPL_FILE/ES071873X-FILE003.PDF
Ouabo, R. E., Ogundiran, M. B., Sangodoyin, A. Y., & Babalola, B. A. (2019). Ecological risk and human health implications of heavy metals contamination of surface soil in e-waste recycling sites in Douala, Cameroun. Journal of Health and Pollution, 9(21). https://doi.org/10.5696/2156-9614-9.21.190310
Shittu, O. S., Williams, I. D., & Shaw, P. J. (2021). Global E-waste management: Can WEEE make a difference? A review of e-waste trends, legislation, contemporary issues and future challenges. Waste Management. Pergamon. https://doi.org/10.1016/j.wasman.2020.10.016
Singh, A., Dwivedi, S. P., & Tripathi, A. (2018). Study of the toxicity of metal contamination in soil samples collected from abandoned e-waste burning sites in Moradabad, India. Nature Environment and Pollution Technology, 17(3), 973–979.
Taylor, A. A., Tsuji, J. S., Garry, M. R., McArdle, M. E., Goodfellow, W. L., Jr., Adams, W. J., & Menzie, C. A. (2020). Critical review of exposure and effects: Implications for setting regulatory health criteria for ingested copper. Environmental Management, 65, 131–159. https://doi.org/10.1007/s00267-019-01234-y
US-EPA. (2002). Toxicological Profile for Arsenic. In ATSDR’s Toxicological Profiles (Vol. 139, p. 559). Atlanta, Georgia. https://doi.org/10.1201/9781420061888_ch33
US-EPA. (2007a). Estimation of relative bioavailability of lead in soil and soil-like materials using in vitro methods. OSWER 9285.7–77. https://nepis.epa.gov/Exe/ZyNET.exe/93001C2U.TXT?ZyActionD=ZyDocument&Client=EPA&Index=2006+Thru+2010&Docs=&Query=&Time=&EndTime=&SearchMethod=1&TocRestrict=n&Toc=&TocEntry=&QField=&QFieldYear=&QFieldMonth=&QFieldDay=&IntQFieldOp=0&ExtQFieldOp=0&XmlQuery=. Accessed 27 May 2022
US-EPA. (2007b). SW-846 Test Method 6200: Field Portable X-Ray Fluorescence Spectrometry for the Determination of Elemental Concentrations in Soil and Sediment | US EPA. https://www.epa.gov/hw-sw846/sw-846-test-method-6200-field-portable-x-ray-fluorescence-spectrometry-determination. Accessed 31 May 2022
Vaccari, M., Vinti, G., Cesaro, A., Belgiorno, V., Salhofer, S., Dias, M. I., & Jandric, A. (2019, May 7). WEEE treatment in developing countries: Environmental pollution and health consequences—An overview. International Journal of Environmental Research and Public Health. Multidisciplinary Digital Publishing Institute. https://doi.org/10.3390/ijerph16091595
VROM. (2000). Dutch Target and Intervention Values; 2000 (the New Dutch List). Netherlands Government Gazette, 2000(4th February, 2000), 1–12. https://www.yumpu.com/en/document/view/44815398/dutch-target-and-intervention-values-2000-esdat. Accessed 27 May 2022
WHO. (2021). Obesity and overweight. Geneva 27, Switzerland. https://www.who.int/news-room/fact-sheets/detail/obesity-and-overweight. Accessed 31 May 2022
World Bank. (2020). Ghana: Country Environmental Analysis. Washington DC 20433. https://documents1.worldbank.org/curated/en/419871588578973802/pdf/Ghana-Country-Environmental-Analysis.pdf. Accessed 31 May 2022
Acknowledgements
The authors are grateful to the Canadian Foundation for Innovation (CFI) for funding for the ICP-MS. We are also grateful to Royal Roads University, Victoria, Canada for funding M Dodd’s trip to Ghana.
Funding
The study was supported by the Danish International Development Agency (DANIDA), through the SHEATHE Project (https://www.sheathe.org) [DFC file number 16-P03-GHA, 2016].
Author information
Authors and Affiliations
Contributions
The study was conceptualized and designed by GD, MD, SG, and LOA. Samples/material collection and preparation were conducted by GD, MD, and LOA. Sample analysis, data collection and statistical analysis were performed by GD, MD, SG, and LOA. The first draft of the manuscript was written by MD and all the authors read and commented on previous versions of the manuscript and approved the final manuscript for submission.
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
Ethical Approval
Not applicable; no human or animal subject was directly used in the study for which an approval ought to be sought.
Consent to Participate
Not applicable; no human participant was directly used in the study for which their consent ought to be sought.
Consent to Publish
All authors have proofread the manuscript and approved the submission.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Dodd, M., Amponsah, L.O., Grundy, S. et al. Human health risk associated with metal exposure at Agbogbloshie e-waste site and the surrounding neighbourhood in Accra, Ghana. Environ Geochem Health 45, 4515–4531 (2023). https://doi.org/10.1007/s10653-023-01503-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10653-023-01503-0