Abstract
A new crustal velocity field for the Alpine Mediterranean area was determined by using a time series spanning 6.5 years of 113 global navigation satellite system (GNSS) permanent stations. This area is characterized by a complex tectonic setting driven by the interaction of Eurasian and African plates. The processing was performed by using a state-of-the-art absolute antenna phase center correction model and by using recomputed precise International GNSS Service orbits, available since April 2014. Thus, a new and more accurate tropospheric mapping function for geodetic applications was adopted. Results provide a new detailed map of the kinematics throughout the entire study area. In some area of the Italian peninsula, such as in the central Apennines, the velocity vector orientation appears rotated with respect to previous results. These discrepancies suggest that the geodynamic setting of this sector of Mediterranean area should be revised in accordance with these new results.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
Introduction
GNSS permanent stations networks are the most common geodetic technique used to materialize and distribute the global geodetic reference system (i.e., International Terrestrial Reference System—ITRS). GNSS continuous time series analyses have made significant contributions in monitoring temporal and spatial changes in the earth’s lithosphere and atmosphere.
The aim of this work is to calculate and analyze the spatial variations of continuous time series of GNSS permanent stations and, finally, to estimate crustal velocities in the Alpine Mediterranean area, which can be used to test and substantiate actual geodynamical hypotheses.
Much scientific literature is available for the velocity field of this area from space geodesy (Noquet 2012). Most of these studies are based on static GPS techniques performed in separated single campaigns during a period of many years. Today, the large number of GNSS permanent stations already existing in the study area allows continuous monitoring of the permanent stations with higher accuracy and higher temporal resolution compared with static GNSS campaigns.
The dataset is composed of 113 GNSS permanent stations, including eight International GNSS Service (IGS) stations that provide datum alignment. The observation window spans 6.5 years, from January 2008 to June 2014.
The adopted processing strategy follows the 2010 International Earth Rotation and Reference Systems Service (IERS) conventions. A state-of-the-art tropospheric empirical global mapping function (Böhm et al. 2007) was applied to map the tropospheric delay in the zenith direction.
Two important contributions to this work are new antenna phase center calibrations and recomputed IGS orbits. The new absolute phase center model for both the receiver and the satellite antennas, called igs08.atx, is more precise and accurate than the older igs05.atx model. The new antenna calibration was introduced by IGS since GPS week 1632 (April 17, 2011) and it produced a discontinuity in the positional time series. For this reason, the Center for Orbit Determination in Europe (CODE) recomputed precise IGS orbits (.sp3) from 1994 to 2013 and made them available since April 2014. Thus, results obtained are fully consistent with the IGb08 international reference frame. Coordinate time series were analyzed to identify and remove discontinuities. Velocities were computed by applying the linear regression method. In order to highlight intra-plate motions of the area of study, the velocity field was transformed into the Eurasian reference frame (i.e., European Terrestrial Reference System—ETRS89). The resulting velocity field shows the structural and kinematic complexity in the Alpine Mediterranean area and improves the framework for analyzing the dynamic processes governing crustal deformation.
Network and data description
The primary geodetic contribution to the project is the high number of GNSS permanent stations already existing in Alpine Mediterranean area and their data availability (Fig. 1). Selected stations present redundancy and temporal continuity, good documentation and homogeneous distribution belonging to national and European geodetic networks. Data analysis was performed using 113 GNSS permanent stations, including all the active stations of the Italian geodetic network (Baroni et al. 2009), 35 stations belonging to the European Permanent Network (EPN) and 8 stations to the IGS network for datum alignment. Moreover, 11 of these EPN stations are defined by EUREF as ‘Class A,’ and they present a long time series solutions in IGb08 calculated from GPS week 834–1800 (January 1996–July 2014). The observation windows are composed by a single weekly solution every month from GPS week 1460–1799 and covering a period of 6.5 years, from January 1, 2008 to June 30, 2014.
GNSS data processing
Quality check of the data was carried out using TEQC software developed by UNAVCO (Estey and Meertens 1999), and the processing was performed with Bernese GPS Software (Dach et al. 2007) from the Astronomical Institute of the University of Bern (AIUB). The processing strategy followed the most recent EUREF guidelines (2013) for local analysis centers. Data were semi-automatically processed using the Bernese Processing Engine (BPE) except for the normal equation stacking stage.
Each daily session was processed independently. The main features of the processing strategy are the interstation baselines formulated using an automated procedure based on a maximum-number-of-observation strategy with a maximum baseline length of 200 km. Data were cleaned by removing observations with elevation angles <3°, unpaired observations, and short data periods. Resolution of ambiguities was performed with QIF (Quasi-Ionosphere-Free) algorithm. The QIF strategy is used to solve ambiguities of baselines over several hundred kilometers. The criterion is to minimize the difference between the real-valued and integer ionospheric-free biases applied to single differences (Dach et al. 2007).
Tropospheric delay in zenith direction was calculated with a priori zenith hydrostatic delay (ZHD) model. The zenith wet delay (ZWD) was estimated using the global model of pressure and temperature for geodetic applications (GMT) developed by Böhm et al. (2007). Daily solutions were obtained using double difference level, multi-base processing with tropospheric delays estimated every 1 h with wet GMT function. Stations with a RMS higher than 20 mm for the north and east components and higher than 40 mm for the up component were eliminated, and the daily datasets were re-computed. Daily free normal equation solutions are stacked to produce a single weekly normal equation. For alignment to the datum, reference stations coordinates are a priori estimated for the dataset epoch using a set of coordinates and velocities defined in the IGb08 global reference frame. Then, each weekly normal equation is aligned to the IGb08 frame by minimizing the differences between calculated and a priori estimated coordinates of reference stations using a Helmert transformation with only three translation parameters.
The IGb08 reference frame represents a specific GNSS realization of the ITRF2008. It was adopted by IGS on April 17, 2011 (GPS week 1632), together with the igs08.atx antenna phase center model (IGSMAIL 6354 and 6355, Upcoming switch to IGS08/igs08.atx). Even if the coordinates of some stations are different in IGb08 and ITRF2008, the global Helmert transformation from ITRF2008 to IGb08 should be considered zero. Both frames are indeed based on the same underlying datum (Rebischung et al. 2012).
Time series analysis
Weekly positioning solutions produce time series for each of the three sites coordinates. As a first approximation, linear regression trends derived from coordinate time series generate velocities. In order to obtain more accurate results, annual and semi-annual seasonal effects were calculated, discontinuities in the time series were detected and analyzed, and obvious outliers were removed. An automated recursive procedure was applied to each station to detect discontinuities and calculate offset corrections. Probable discontinuities were identified and highlighted comparing their values to predicted thresholds. In most cases, the detected discontinuities were due to antenna changes. The least-squares approach was applied independently to each site modeling the position components Y k (t i ) at epoch t i by the following relation:
where k = n, e, u for north, east and up components, Y k (t 0 ) is the station position at time t 0 , v k is the velocity of k component from best fitting line after removing periodic signal and discontinuities, a 1 and φ 1 are annual amplitude and phase, a 2 and φ 2 are semi-annual amplitude and phase, d j is discontinuity introduced at epoch t j and Θ(t) = 0 if t < 0 and Θ(t) = 1 if t ≥ 0.
Formal velocity error statistics estimated with a standard least square algorithm underestimate actual values (Zhang et al. 1997; Mao et al. 1999). The assumptions of stationary are often not valid, and rate standard deviations are dependent on the low frequency part of the noise spectrum which is poorly determined. More realistic uncertainties of the estimated velocities must account for the correlated noise present in the time series. Annual and semi-annual periodic signals were previously examined to avoid a biased adjustment. The analysis of correlated noise was performed using the maximum likelihood estimation (MLE) technique (CATS software, Williams 2008). Power law noise models and first order of Gauss–Markov process were analyzed and compared with each other (Fig. 2). The rate uncertainties appear clearly correlated in all the three direction components. A straight line fits to the points with a scale factor of 1–2 between white noise and Gauss–Markov uncertainty, while a scale factor of 2–4 between white and flicker noise. Finally, realistic velocity uncertainties were estimated using a combination of white noise plus flicker noise (Williams 2003; Williams et al. 2004).
Velocities estimation in the European Terrestrial Reference System (ETRS)
The ITRF08/IGS08 velocity field map is not well suited to give an easy overview and interpretation of the geodynamic of the study area. The intra-plate horizontal site velocity V E was computed for each site by subtracting the point velocity V I = (v xI, v yI, v zI) whose position vector is P = (X, Y, Z), and the absolute rigid plate kinematic model for the Eurasia plate V Eurasia plate,
The three Cartesian components of the Eurasia Euler pole relative to IGb08 are ω x = −0.083, ω y = −0.534 and ω z = 0.775 mas/a, published by Altamimi et al. (2012).
The estimated horizontal velocities with 95 % confidence error ellipses are shown in Fig. 3, and the vertical velocities with error bars are shown in Fig. 4. In order to gain further insights into the kinematic processes, we computed interpolated horizontal and vertical velocity fields within a regular grid (0.02° × 0.02°). The interpolation was computed by applying inverse distance weighting (Shepard 1968), a deterministic multivariate method with a set of scattered points. The weight of any known point is set inversely proportional to its distance from the interpolated (unknown) point as \(w\left( d \right) = d^{ - 2}\). Maps of variation for the north and east components of velocity field are shown in Fig. 5.
In order to verify the above velocities, they were compared with the velocities of 11 ‘Class A’ EPN stations. These velocities are the cumulative combination of 18.5 years of weekly solutions, from GPS week 834 until 1800. Processing of ‘Class A’ EPN stations was performed by Kenyeres (2014) applying recomputed precise IGS08 orbits and igs08.atx antenna phase center model. Absolute mean differences between datasets are 0.5 mm/a and 0.4 mm/a, respectively, for the north and east components (Table 1). This comparison shows that computed velocities are very close to the velocities determined from a wider dataset spanning 18.5 years.
Euler rotation vector and Euler pole for the Alpine Mediterranean area
The Alpine Mediterranean area shows a relative velocity residual to the stable part of Eurasia plate. GNSS stations located in Sicily largely present a velocity up to 4 mm/a, in agreement with the Eurasia–Nubian convergence process (Hollensteinm et al. 2003). Since the ETRS velocity field map does not show an easy overview and interpretation of the geodynamic pattern of the study area, a local reference frame was defined. A local frame is identified with a relative movement or rotation with respect to another one. It is described by a relative kinematic model or applying a rotation for angle Ω around a point on earth’s surface, i.e., the Euler pole. The intersection of the Euler pole on the surface of the earth is a fixed point around which the frame rotates. The Euler rotation model essentially constrains the frame to move rigidly on the earth surface, without changing vertical velocities. The determination of the local frame for the case of study was performed using all the site velocities of the network and their errors in the ITRF2008/IGb08 reference frame, by estimating the three Euler vector parameters (Table 2) that minimize the horizontal components of velocity with a weighted least-squares inversion (Perez et al. 2003). The computed velocity field is displayed in Fig. 6, and its horizontal components are shown in Fig. 7.
Discussion and Conclusions
The new processing of the permanent GNSS data, performed by using a state-of-the-art absolute antenna phase center correction model and by using recomputed precise IGS orbits allows evaluating the crustal velocity field of the Italian Peninsula with horizontal component errors generally <0.2 mm/a. The results show that the velocity field along the west Alpine chain does not show significant residual motion relative to the Eurasian plate (<0.2 mm/a). The main deformation of this area is connected with uplift that reaches a mean value of 1 mm/a, generally lower than the computational error (Fig. 4). Small residual motions arise along the northern Apennines and on the nearby Po plain. The Apennine axis constitutes a boundary zone between two different velocity patterns; the inner Apennine is almost stable relative to Eurasia, while the outer sector shows a velocity field of 3–5 mm/a in NE direction. In the central Apennines, the velocity vector orientation appears rotated more than 30° clockwise with respect to previous data (Serpelloni et al. 2005; Angelica et al. 2013; Cenni et al. 2012). Southern Italy shows the greatest residual motions compared to the Eurasian plate. An important boundary line that separates peninsular Italy from Sicily presents different velocity patterns (Figs. 3 and 5) that assume a fan-shaped divergent motions (Hollensteinm et al. 2003) showing a minor fan-shaped angle with respect to previous data; for example, in western Sicily our data show a 13° clockwise rotation of the velocity vector with respect the vector given by Palano (2015); in eastern Sicily, it shows a 15° counterclockwise rotation. The western part of Sicily shows 5.0 mm/a velocities in direction NNW, while eastern Sicily and Calabria move at slower rate of 3.5 mm/a in NE direction (Fig. 5a). Western Sicily shows a faster north component of 1.5 mm/a and presents a relative E–W stretching of 2.5 mm/a with respect to Calabria (Fig. 5b) where our data mostly replicate the velocity field previously detected (Ventura et al. 2014). The eastern Alps, Corsica, Sardinia and the Tyrrhenian Sea (which is covered only by interpolation data) show small velocity residuals with respect to the Eurasian plate.
The velocity field estimated using the local reference frame (Alpine Mediterranean area) highlights the movements toward the north of the central and southern Apennine, while the Alpine chain and the Sardinia–Corsica block moved relatively to the south. The east–west velocity component confirms that the inner Apennines moved toward west, conversely the outer Apennines which move relatively to the east. These patterns, also taking into account the component velocity modulus, identify the main boundary zones in the Italian peninsula.
The new GNSS data document a complex pattern of crustal motion characterized by divergent orientation of velocity vectors, especially in central/southern Apennines, Calabrian arc and Sicily that highlight a strong tectonic fragmentation of these areas. The actual geodynamic setting of this sector of Mediterranean area should be revised taking into account these new GNSS data.
References
Altamimi Z, Métivier L, Collilieux X (2012) ITRF2008 plate motion model. J Geophys Res 117(B07402). doi:10.1029/2011JB008930
Angelica C, Bonforte A, Distefano G, Serpelloni E, Gresta S (2013) Seismic potential in Italy from integration and comparison of seismic and geodetic strain rates. Tectonophysics 608:996–1006. doi:10.1016/j.tecto.2013.07.014
Baroni L, Cauli F, Farolfi G, Maseroli R (2009) Final results of the Italian Rete Dinamica Nazionale (RDN) of Instituto Geografico Militare Italiano (IGMI) and its alignment to ETRF2000. Bull Geod Geomat 68(3):287–320 (ISSN 0006-6710)
Böhm J, Heinkelmann R, Schuh H (2007) A global model of pressure and temperature for geodetic applications. J Geod 81(10):679–683. doi:10.1007/s00190-007-0135-3
Cenni N, Mantovani E, Baldi P, Viti M (2012) Present kinematics of Central and Northern Italy from continuous GPS measurements. J Geodyn 58:62–72. doi:10.1016/j.jog.2012.02.004
Dach R, Hugentobler U, Fridez P, Meindl M (2007) The Bernese GPS Software Version 5.0. Astronomical Institute of University of Bern (AIUB), Bern
Estey L, Meertens C (1999) TEQC: the multi-purpose toolkit for GPS/GLONASS data. GPS solut 3(1):42–49
Hollensteinm C, Khale HG, Geiger A, Jenny S, Goes S, Giardini D (2003) New GPS constraints on the Africa–Eurasia plate boundary zone in Southern Italy. Geophys Res Lett 30(18). doi:10.1029/2003GL017554
Kenyeres A (2014) EUREF densification of the IGS08, ftp://epncb.oma.be/epncb/station/coord/EPN/EPN_A_IGb08
Mao A, Harrison CGA, Dixon TH (1999) Noise in GPS coordinate time series. J Geophys Res 104(B2):2797–2816. doi:10.1029/1998JB900033
Noquet J (2012) Present-day kinematics of the Mediterranean: a comprehensive overview of GPS results. Tectonophysics 579:220–242. doi:10.1016/j.tecto.2012.03.037
Palano M (2015) On the present-day crustal stress, strain-rate fields and mantle anisotropy pattern of Italy. Geophys J Int 200:969–985
Perez J, Monico J, Chaves J (2003) Velocity field estimation using GPS precise point positioning: the South American plate case. J Glob Position Syst 2(2):90–99
Rebischung P, Griffiths J, Ray J, Schmid R, Collilieux X, Garayt B (2012) IGS08: the IGS realization of ITRF2008. GPS Solut 16(4):483–494. doi:10.1007/s10291-011-0248-2
Serpelloni E, Anzidei M, Baldi P, Casula G, Galvani A (2005) Crustal velocity and strain-rate fields in Italy and surrounding regions: new results from the analysis of permanent and non-permanent GPS networks. Geophys J Int 161:861–880
Shepard D (1968) A two-dimensional interpolation function for irregularly-spaced data. Proceedings of the 1968 ACM national conference. pp 517–524. doi:10.1145/800186.810616
Ventura BM, Serpelloni E, Argnani A, Bonforte A, Bürgmann R, Anzidei M, Baldi P, Puglisi G (2014) Fast geodetic strain-rates in eastern Sicily (Southern Italy): new insights into block tectonics and seismic potential in the area of the great 1693 earthquake. Earth Planet Sci Lett 404:77–88. doi:10.1016/j.epsl.2014.07.025
Weber J, Vrabec M, Pavlovčič-Prešeren P, Dixon T, Jiang Y, Stopar B (2010) GPS-derived motion of the Adriatic microplate from Istria Peninsula and Po Plain sites, and geodynamic implications. Tectonophysics 483:214–222. doi:10.1016/j.tecto.2009.09.001
Williams SDP (2003) The effect of colored noise on the uncertainties of rates estimated from geodetic time series. J Geod 76:483–494. doi:10.1007/s00190-002-0283-4
Williams SDP (2008) CATS: GPS coordinate time series analysis software. GPS Solut 12(2):147–153. doi:10.1007/s10291-007-0086-4
Williams SDP Y, Bock Y, Fang P, Jamason P, Nikolaidis RM, Prawirodirdjo L, Miller M, Johnson DJ (2004) Error analysis of continuous GPS position time series. J Geophys Res 109(B03412). doi:10.1029/2003JB002741
Zhang J, Bock Y, Johnson H, Fang P, Genrich J, Williams S, Wdowinski S, Behr J (1997) Southern California permanent GPS geodetic array: error analysis of daily position estimates and site velocities. J Geophys Res 102(B8):18035–18055. doi:10.1029/97JB01380
Acknowledgments
This work was supported by Istituto Geografico Militare (IGM) and Department of Earth Sciences, University of Firenze (Professor N. Casagli). Fruitful discussions and exchanges with W. Frodella and A. Piombino have been very valuable for the work. All the figures were prepared using the open source Quantum GIS.
Author information
Authors and Affiliations
Corresponding author
Additional information
An erratum to this article can be found at http://dx.doi.org/10.1007/s10291-016-0524-2.
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
About this article
Cite this article
Farolfi, G., Del Ventisette, C. Contemporary crustal velocity field in Alpine Mediterranean area of Italy from new geodetic data. GPS Solut 20, 715–722 (2016). https://doi.org/10.1007/s10291-015-0481-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10291-015-0481-1