Abstract
The insufficient load-bearing capacity of today’s tissue-engineered (TE) cartilage limits its clinical application. Focus has been on engineering cartilage with enhanced mechanical stiffness by reproducing native biochemical compositions. More recently, depth dependency of the biochemical content and the collagen network architecture has gained interest. However, it is unknown whether the mechanical performance of TE cartilage would benefit more from higher content of biochemical compositions or from achieving an appropriate collagen organization. Furthermore, the relative synthesis rate of collagen and proteoglycans during the TE process may affect implant performance. Such insights would assist tissue engineers to focus on those aspects that are most important. The aim of the present study is therefore to elucidate the relative importance of implant ground substance stiffness, collagen content, and collagen architecture of the implant, as well as the synthesis rate of the biochemical constituents for the post-implantation mechanical behavior of the implant. We approach this by computing the post-implantation mechanical conditions using a composition-based fibril-reinforced poro-viscoelastic swelling model of the medial tibia plateau. Results show that adverse implant composition and ultrastructure may lead to post-implantation excessive mechanical loads, with collagen orientation being the most critical variable. In addition, we predict that a faster synthesis rate of proteoglycans compared to that of collagen during TE culture may result in excessive loads on collagen fibers post-implantation. This indicates that even with similar final contents, constructs may behave differently depending on their development. Considering these aspects may help to engineer TE cartilage implants with improved survival rates.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Agneskirchner JD, Hurschler C, Stukenborg-Colsman C et al (2004) Effect of high tibial flexion osteotomy on cartilage pressure and joint kinematics: a biomechanical study in human cadaveric knees. Arch Orthop Trauma Surg 124(9): 575–584
Asanbaeva A, Masuda K, Thonar EJ-MA, Sah RL (2007) Mechanisms of cartilage growth modulation of balance between proteoglycan and collagen in vitro using chondroitinase ABC. Arthrit Rheum 56(1): 188–198
Bian L, Crivello KM, Ng KW et al (2009) Influence of temporary chondroitinase ABC-induced glycosaminoglycan suppression on maturation of tissue-engineered cartilage. Tissue Eng Part A 15(8): 2065–2072
Buschmann MD, Gluzband YA, Grodzinsky AJ et al (1992) Chondrocytes in agarose culture synthesize a mechanically functional extracellular matrix. J Orthop Res 10(6): 745–758
Chen C-T, Bhargava M, Lin PM, Torzilli PA (2003) Time, stress, and location dependent chondrocyte death and collagen damage in cyclically loaded articular cartilage. J Orthop Res 21: 888–898
Duchow J, Hess T, Kohn D (2000) Primary stability of press-fit-implanted osteochondral grafts: influence of graft size, repeated insertion, and harvesting technique. Am J Sports Med 28: 24–27
Eyrich D, Brandl F, Appel B et al (2007) Long-term stable fibrin gels for cartilage engineering. Biomaterials 28: 55–65
Glaser C, Putz R (2002) Functional anatomy of articular cartilage under compressive loading Quantitative aspects of global, local and zonal reactions of the collagenous network with respect to the surface integrity. Osteoarthr Cartil 10(2): 83–99
Horas U, Pelinkovic D, Herr G (2003) Autologous chondrocyte implantation and osteochondral cylinder transplantation in cartilage repair. J Bone Joint Surg Am 85(2): 185–192
Hu JC, Athanasiou KA (2006) A self-assembling process in articular cartilage tissue engineering. Tissue Eng 12: 969–979
Huang C, Yannas IV (1977) Mechanochemical studies of enzymatic degradation of unsoluble collagen fibers. J Biomed Mater Res 11: 137–154
Hurtig M, Evans P, Pearce S et al. (1999) The effect of graft size and number on the outcome of mosaic arthroplasty resurfacing: an experimental model in sheep. Transactions, 18th Annual Meeting of the Arthroscopy Association of North America, Vancouver, vol 18, pp 16-17
Kelly TAN, Ng KW, Wang CC et al (2006) Spatial and temporal development of chondrocyte-seeded agarose constructs in free-swelling and dynamically loaded cultures. J Biomech 39: 1489–1497
Khoshgoftar M, van Donkelaar CC, Ito K (2011) Mechanical stimulation to stimulate formation of physical collagen architecture in tissue-engineered cartilage; a numerical study. Comp Meth Biomech Biomed Eng 14(2): 135–144
Kim TK, Sharma B, Williams CG et al (2003) Experimental model for cartilage tissue engineering to regenerate the zonal organization of articular cartilage. Osteoarthr Cartil 11: 653–664
Klein TJ, Chaudhry M, Bae WC, Sah RL (2007) Depth-dependent biomechanical and biochemical properties of fetal, newborn, and tissue-engineered articular cartilage. J Biomech 40: 182–190
Klisch SM, Chen SS, Sah RL (2003) A growth mixture theory for cartilage with application to growth-related experiments on cartilage explants. J Biomech Eng 125: 169–179
Kock LM, van Donkelaar CC, Ito K (2010) Depth-dependent stimulation of chondrocytes in agarose by sliding indentation. In 56th annual meeting of the Orthopaedic Research Society, New Orleans, vol 35, p 810
Kock NB, van Susante JLC, Buma P et al (2006) Press-fit stability of an osteochondral autograft. Influence of different plug length and perfect depth alignment. Acta Orthopaed 77(3): 422–428
Korhonen RK, Julkunen P, Wilson W, Herzog W (2008) Importance of collagen orientation and depth-dependent fixed charge densities of cartilage on mechanical behavior of chondrocytes. J Biomech Eng 130(2): 021003
Korhonen RK, Wong M, Arokoski J et al (2002) Importance of the superficial tissue layer for the indentation stiffness of articular cartilage. Med Eng Phys 24: 99–108
Kuo CK, Li WJ, Mauck RL, Tuan RS (2006) Cartilage tissue engineering: its potential and uses. Curr Opin Rheum 18: 64–73
Kurz B, Jin M, Patwari P, Cheng D, Lark M, Grodzinsky A (2001) Biosynthetic response and mechanical properties of articular cartilage after injurious compression. J Orthop Res 19: 1140–1146
Lane JG, Massie JB, Ball ST (2004) Follow-up of osteochondral plug transfers in a goat model: a 6-month study. Am J Sports Med 32(6): 1440–1450
Malda J, Woodfield T, van der Vloodt F et al (2005) The effect of PEGT/PBT scaffold architecture on the composition of tissue engineered cartilage. Biomaterials 26(1): 63–72
Marzo JM, Gurske-DePerio J (2009) Effects of medial meniscus posterior horn avulsion and repair on tibiofemoral contact area and peak contact pressure with clinical implications. Am J Sports Med 37(1): 124–129
Mauck RL, Wang CC-B, Oswald ES et al (2003) The role of cell seeding density and nutrient supply for articular cartilage tissue engineering with deformational loading. Osteoarthr Cartil 11: 879–890
Meyer EG, Baumer TG, Slade JM et al (2008) Tibiofemoral contact pressures and osteochondral microtrauma during anterior cruciate ligament rupture due to excessive compressive loading and internal torque of the human knee. Am J Sports Med 36(10): 1966–1977
Miot S, Scandiuccide Freitas P, Wirz D et al (2006) Cartilage tissue engineering by expanded goat articular chondrocytes. J Orthop Res 24: 1078–1085
Mononen ME, Julkunen P, Toyras J et al (2011) Alterations in structure and properties of collagen network of osteoarthritic and repaired cartilage modify knee joint stresses. Biomech Model Mechanobiol 10(3): 357–369
Morimoto Y, Ferretti M, Ekdahl M et al (2009) Tibiofemoral joint contact area and pressure after single- and double-bundle anterior cruciate ligament reconstruction. Arthroscopy 25(1): 62–69
Morlock M, Schneider E, Bluhm A et al (2001) Duration and frequency of every day activities in total hip patients. J Biomech 34: 873–881
Moutos FT, Freed LE, Guilak F (2007) A biomimetic three dimensional woven composite scaffold for functional tissue engineering of cartilage. Nat Mater 6(2): 162–167
Nabeshima Y, Grood ES, Sakurai A, Herman JH (1996) Uniaxial tension inhibits tendon collagen degradation by collagenase in vitro. J Orthop Res 14: 123–130
Nesic D, Whiteside R, Brittberg M et al (2006) Cartilage tissue engineering for degenerative joint disease. Adv Drug Deliv Rev 58: 300–322
Ng KW, Ateshian GA, Hung CT (2009) Zonal chondrocytes seeded in a layered agarose hydrogel create engineered cartilage with depth-dependent cellular and mechanical inhomogeneity. Tissue Eng A 15: 1–10
Ng KW, Wang CC, Mauck RL et al (2005) A layered agarose approach to fabricate depth-dependent inhomogeneity in chondrocyte-seeded constructs. J Orthop Res 23: 134–141
Noth U, Steinert AF, Tuan RS (2008) Technology insight: adult mesenchymal stem cells for osteoarthritis therapy. Nat Clin Pract Rheum 4: 371–380
Owen JR, Wayne JS (2006) Influence of a superficial tangential zone over repairing cartilage defects: implications for tissue engineering. Biomech Model Mechanobiol 5: 102–110
Petersen JP, Ueblacker P, Goepfert C et al (2008) Long term results after implantation of tissue engineered cartilage for the treatment of osteochondral lesions in a minipig model. J Mater Sci Mater Med 19: 2029–2038
Risbud MV, Sittinger M (2002) Tissue engineering: advances in in vitro cartilage generation. Trend Biotech 20: 351–356
Ruberti JW, Hallab NJ (2005) Strain-controlled enzymatic cleavage of collagen in loaded matrix. Biochem Biophys Res Commun 336: 483–489
Schek RM, Taboas JM, Segvich SJ et al (2004) Engineered osteochondral grafts using biphasic composite solid free-form fabricated scaffolds. Tissue Eng 10: 1376–1385
Scotti C, Buragas MS, Mangiavini L et al (2007) A tissue engineered osteochondral plug: an in vitro morphological evaluation. Knee Surg Sports Traumatol Arthrosc 15: 1363–1369
Shirazi R, Shirazi-Adl A (2008) Deep vertical collagen fibrils play a significant role in mechanics of articular cartilage. J Orthop Res 26: 608–615
Shirazi R, Shirazi-Adl A, Hurtig M (2008) Role of cartilage collagen fibrils networks in knee joint biomechanics under compression. J Biomech 41: 3340–3348
Smith RL, Trindade MCD, Ikenoue T et al (2000) Effects of shear stress on articular chondrocyte metabolism. Biorheology 37: 95–107
Thibault M, Poole AR, Buschmann MD (2002) Cyclic compression of cartilage/bone explants in vitro leads to physical weakening, mechanical breakdown of collagen and release of matrix fragments. J Orthop Res 20: 1265–1273
Torzilli P (1993) Effects of temperature, concentration and articular surface removal on transient solute diffusion in articular cartilage. Med Biol Eng Comp 31(Suppl): S93–S98
Torzilli P, Dethmers D, Rose D, Schryuer H (1983) Movement of interstitial water through loaded articular cartilage. J Biomech 16(3): 169–179
van Donkelaar CC, Wilson W (2011) Mechanics of chondrocyte hypertrophy. Biomech Model Mechanobiol. doi:10.1007/s10237-011-0340-0
Wang JHC (2006) Mechanobiology of tendon. J Biomech 39: 1563–1582
Wilson W, Driessen NJB, van Donkelaar CC et al (2006a) Prediction of collagen orientation in articular cartilage by a collagen remodeling algorithm. Osteoarthr Cartil 14: 1196–1202
Wilson W, Huyghe JM, van Donkelaar CC (2006b) A composition-based cartilage model for the assessment of compositional changes during cartilage damage and adaptation. Osteoarthr Cartil 14: 554–560
Wilson W, Huyghe JM, van Donkelaar CC (2007) Depth-dependent compressive equilibrium properties of articular cartilage explained by its composition. Biomech Model Mechanobiol 6: 43–53
Wilson W, van Donkelaar CC, van Rietbergen B et al (2004) Stresses in the local collagen network of articular cartilage: a poroviscoelastic fibril-reinforced finite element study. J Biomech 37: 357–366
Wilson W, van Rietbergen B, van Donkelaar CC, Huiskes R (2003) Pathways of load-induced cartilage damage causing cartilage degeneration in the knee after meniscectomy. J Biomech 36: 845–851
Acknowledgments
This study was supported with funding from the Dutch Technology Foundation STW (VIDI-07970).
Open Access
This article is distributed under the terms of the Creative Commons Attribution License which permits any use, distribution, and reproduction in any medium, provided the original author(s) and the source are credited.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 2.0 International License (https://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
About this article
Cite this article
Khoshgoftar, M., Wilson, W., Ito, K. et al. The effect of tissue-engineered cartilage biomechanical and biochemical properties on its post-implantation mechanical behavior. Biomech Model Mechanobiol 12, 43–54 (2013). https://doi.org/10.1007/s10237-012-0380-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10237-012-0380-0