Abstract
This paper presents a three-dimensional finite element model of skeletal muscle and its validation incorporating inital tissue strains. A constitutive relation was determined by using a convex free strain energy function (SEF) where active and passive response contributions were obtained fitting experimental data from the rat tibialis anterior (TA) muscle. The passive and active finite strains response was modelled within the framework of continuum mechanics by a quasi-incompressible transversely isotropic material formulation. Magnetic resonance images (MRI) were obtained to reconstruct the external geometry of the TA. This geometry includes initial strains also taken into account in the numerical model. The numerical results show excellent agreement with the experimental results when comparing reaction force-extension curves both in passive and active tests. The proposed constitutive model for the muscle is implemented in a subroutine in the commercial finite element software package ABAQUS.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Arruda EM, Mundy K, Calve S, Baar K (2007) Denervation does not change the ratio of collagen i and collagen iii mrna in the extracellular matrix of muscle. Am J Physiol Regul Integr Comp Physiol 292(2): R983–R987
Blemker BB, Delp SL (2005) Three-dimensional representation of complex muscle architectures and geometries. Ann Biomed Eng 33: 661–673
Blemker BB, Pinsky PM, Delp SL (2005) A 3d model of muscle reveals the causes of nonuniform strains in the biceps brachii. Ann Biomed Eng 38: 657–665
Böl M, Reese S (2008) Micromechanical modelling of skeletal muscles based on the finite element method. Comput Methods Biomech Biomed Engin 11: 489–504
Borg TK, Caulfield JB (1980) Morphology of connective tissue in skeletal muscle. Tissue Cell 12(1): 197–207
Calvo B, Ramírez A, Alonso A, Grasa J, Soteras F, Osta R, Muñoz MJ (2010) Passive nonlinear elastic bechaviour of skeletal muscle: experimental results and model formulation. J Biomech 43: 318–325
Chi S-W, Hodgson J, Chen JS, Reggie Edgerton V, Shin DD, Roiz RA, Sinha S (2010) Finite element modeling reveals complex strain mechanics in the aponeuroses of contracting skeletal muscle. J Biomech 43(7): 1243–1250
d’Aulignac D, Martins JA, Pires EB, Mascarenhas T, Jorge RM (2005) A shell finite element model of the pelvic floor muscles. Comput Methods Biomech Biomed Engin 8(5): 339–347
Davis J, Kaufman KR, Lieber RL (2003) Correlation between active and passive isometric force and intramuscular pressure in the isolated rabbit tibialis anterior muscle. J Biomech 36(4): 505–512
Fernandez JW, Buist ML, Nickerson DP, Hunter PJ (2005) Modelling the passive and nerve activated response of the rectus femoris muscle to a flexion loading: a finite element framework. Med Eng Phys 27(10): 862–870
Fernandez JW, Hunter PJ (2005) An anatomically based patient- specific finite element model of patella articulation: towards a diagnostic tool. Biomech Model Mechanobiol 4(1): 20–38
Gardiner JC, Weiss JA (2003) Subject-specific finite element analysis of the human medial collateral ligament during valgus knee loading. J Orthop Res 21(6): 1098–1106
Gardiner JC, Weiss JA, Rosenberg TD (2001) Strain in the human medial collateral ligament during valgus lading of the knee. Clin Orthop Relat Res 391: 266–274
Grover JP, Corr DT, Toumi H, Manthei D, Oza AL, Vanderby R, Best TM (2007) The effect of stretch rate and activation state on skeletal muscle force in the anatomical range. Clin Biomech (Bristol, Avon) 22(3): 360–368
Hawkins D, Bey M (1997) Muscle and tendon force-length properties and their interactions in vivo. J Biomech 30(1): 63–70
Hibbit K, Sorensen (2006) Abaqus user’s guide, v. 6.5. HKS inc. Pawtucket, RI USA. http://www.simulia.com/
Hill AV (1938) The heat of shortening and the dynamic constants of muscle. In: Proceedings of the royal society of London. Series B, Biological Sciences 126, pp 136–195
Holzapfel GA (2000) Nonlinear solid mechanics. A continuum approach for engineering. Wiley, London
Huijing PA, Baan GC, Rebel GT (1998) Non-myotendinous force transmission in rat extensor digitorum longus muscle. J Exp Biol 201(Pt 5): 683–691
Johansson T, Meier P, Blickhan R (2000) A finite-element model for the mechanical analysis of skeletal muscles. J Theor Biol 206(1): 131–149
MacIntosh BR, Gardiner PF, McComas AJ (2006) Skeletal muscle form and function, 2nd edn. Human Kinetics
Magid A, Law DJ (1985) Myofibrils bear most of the resting tension in frog skeletal muscle. Science 230(4731): 1280–1282
Martins JAC, Pires EB, Salvado R, Dinis PB (1998) Numerical model of passive and active behavior of skeletal muscles. Comput Methods Appl Mech Eng 151: 419–433
Materialise (2010) Mimics. Materialise Medical Software. http://www.materialise.com/mimics
Monti RJ, Roy R, Zhong H, Edgerton VR (2003) Mechanical properties of rat soleus aponeurosis and tendon during variable recruitment in situ. J Exp Biol 206(Pt 19): 3437–3445
Oomens CWJ, Maenhout M, van Oijen CH, Drost MR, Baaijens FP (2003) Finite element modelling of contracting skeletal muscle. Philos Trans R Soc Lond B Biol Sci 358(1437): 1453–1460
Peña E, Martinez MA, Calvo B, Doblaré M (2006) On the numerical treatment of initial strains in biological soft tissues. Int J Numer Methods Eng 68(8): 836–860
Ramírez A, Grasa J, Alonso A, Soteras F, Osta R, Muñoz MJ, Calvo B (2010) Active response of skeletal muscle. In vivo experimental results and model formulation. J Theor Bio 267: 546–553
Tang CY, Zhang G, Tsui CP (2009) A 3d skeletal muscle model coupled with active contraction of muscle fibres and hyperelastic behaviour. J Biomech 42(7): 865–872
Tsui CP, Tang CY, Leung CP, Cheng KW, Ng YF, Chow DH, Li CK (2004) Active finite element analysis of skeletal muscle- tendon complex during isometric, shortening and lengthening contraction. Biomed Mater Eng 14: 271–279
Weiss JA, Maker BN, Govindjee S (1996) Finite element implementation of incompressible, transversely isotropic hyperelasticity. Comput Methods Appl Mech Eng 135: 107–128
Yucesoy CA, Koopman BHFJM, Huijing PA, Grootenboer HJ (2002) Three-dimensional finite element modeling of skeletal muscle using a two-domain approach: linked fiber-matrix mesh model. J Biomech 35(9): 1253–1262
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Grasa, J., Ramírez, A., Osta, R. et al. A 3D active-passive numerical skeletal muscle model incorporating initial tissue strains. Validation with experimental results on rat tibialis anterior muscle. Biomech Model Mechanobiol 10, 779–787 (2011). https://doi.org/10.1007/s10237-010-0273-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10237-010-0273-z