Abstract.
The integrated barium sulphide process consists of: preliminary treatment with lime, sulphate precipitation as barium sulphate, H2S-stripping, crystallization of CaCO3, and recovery of barium sulphide. Our tests showed that during lime pre-treatment, sulphate was lowered from 2 800 mg/L to 1 250 mg/L by gypsum crystallization; metals were precipitated as hydroxides. The BaS treatment then lowered sulphate to less than 200 mg/L. Sulphide was lowered from 333 to less than 10 mg/L (as S) in the stripping stage, using CO2 gas for stripping. The stripped H2S-gas was contacted with Fe (III)-solution and converted quantitatively to elemental sulphur. The alkalinity of the calcium bicarbonate-rich water was reduced from 1 000 to 110 mg/L (as CaCO3) after CO2-stripping with air due to CaCO3 precipitation. Fe (II), after sulphur production, was re-oxidized to Fe (III) using an electrolytic step. The running cost of the BaS process is R2.12/m3 (US$1 = SAR6.5) for the removal of 2 g/L of sulphate.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Maree, J.P., Hlabela, P., Nengovhela, R. et al. Treatment of Mine Water for Sulphate and Metal Removal Using Barium Sulphide. Mine Water Environ 23, 195–203 (2004). https://doi.org/10.1007/s10230-004-0062-y
Received:
Revised:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/s10230-004-0062-y