Abstract
The most popular isotropic yield conditions, verified for many ductile metals, were proposed by Tresca in 1864 (maximum shearing stresses theory) and von Mises in 1913. The von Mises yield theory (von Mises in Mathematisch-physikalische Klasse 582–592, 1913), also known as maximum distortion energy criterion, finds considerable experimental support, especially for very ductile materials and plane stress (Banabic et al. in Int. J. Mater. Form. 3:165–189, 2010). For this reason, and for its simplicity, it is common in design. During 100 years, this theory has been developed and improved systematically by Hosford, Christensen, Tsai-Hill, etc. The modified von Mises hypothesis combines the theories of maximum strain energy and maximum distortion energy, and it involves the Poisson ratio. It ensures a smooth transition from the von Mises to the Beltrami criterion. The results obtained by this new yield hypothesis are compared with those obtained both by the classic von Mises criterion and by experiments on different metallic materials. A quite good concordance is observed between these results.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
von Mises, R.: Mechanik der festen Körper im plastisch deformablen Zustand, Nachrichten von der Königlichen Gesellschaft der Wissenschaften zu Göettingen, Mathematisch-physikalische Klasse, 582–592 (1913)
Banabic, D., Barlat, F., Cazacu, O., Kuwabara, T.: Advances in anisotropy and formability. Int. J. Mater. Form. 3, 165–189 (2010)
Dieter, G.: Mechanical Metallugy. McGraw Hill, London (1988). ISBN 0-07-100406-8
Ponomariov, S.D.: Strength of materials calculus for machine design (in Romanian), vol 1, p. 283, Ed. Tehnica, Bucuresti (1960)
http://classes.mst.edu/civeng2211/lessons/failure/theories/index.html
Mao-hong, Yu.: Advances in strength theories for materials under complex stress state in the 20th century. Appl. Mech. Rev. 55(3), 169–218 (2002)
Huber, M.T.: Przyczynek do podstaw wytorymalosci. Czasop Techn 22, 81 (1904)
Engel, Z.: Huber’s Yield Criterion in Plasticity. AGH, Krakow (1994)
Hencky, H.: Zur Theorie plastischer Deformationen und der hierdurch im Material hervorgerufenen Nachspannngen. Z. Angew. Math. Mech. 4, 323–334 (1924)
Timoshenko, S.P.: History of Strength of Materials. McGraw-Hill, New York (1953)
Huang, Mojia, Man, Chi-Sing: A generalized Hosford yield function for weakly-textured sheets of cubic metals. Int. J. Plast. 41, 97–123 (2013)
Christensen, R.M.: A comprehensive theory of yielding and failure for isotropic materials. J. Eng. Mater. Technol. 129, 173–181 (2007)
Christensen, R.M.: The Theory of Materials Failure. Oxford University Press, Oxford (2013)
Christensen, R.M.: Failure Theory for Materials Science and Engineering, Chapter VII, The ductile/brittle transition, gaging ductility levels, http://www.failurecriteria.com/Media/Ductile_Brittle_Transition_Gaging_Ductility_Levels.pdf (2013). Accesed 15 Sept 2013
Serna Moreno, M.C., J.L., Martínez Vicente, J.J, López Cela: Failure strain and stress fields of a chopped glass-reinforced polyester under biaxial loading. Compos. Struct. 103, 27–33 (2013)
Drucker, D., Prager, W.: Soil mechanics and plastic analysis or limit design. Q. Appl. Math. 10, 157–165 (1952)
Wilson, C.D.: A critical reexamination of classical metal plasticity. J. Appl. Mech. Trans. ASME 69, 63–68 (2002)
Taylor, G.I., Quinney, H.: Plastic deformation of metals. Philos. Trans. R. Soc. Sect. A 230, 323–362 (1931)
Ugural, A.C., Fenster, S.K.: Advanced Strength and Applied Elasticity, 3rd edn. PTR Prentice Hall, New Jersey (1995)
Ratner, S.I.: Strength and Plasticity. National Defence Press, Moscow (1949)
Yu, M.H.: General behaviour of isotropic yield function (in Chinese), Rez. Report of Xi’an Jiaotong Univ. Xi’an (1961)
Yu, M.H.: New System of Strength Theory (in Chinese). Xian Jiaotong University Press, Xi’an (1992)
Mott, P.H., Roland, C.M.: Limits to Poisson’s ratio in isotropic materials. Phys. Rev. B 80, 1–4 (2009)
Harkati, E.-H., Azari, Z., Jodin, Ph, Bezazi, A.: Multilayer composite materials with non-usual Poisson’s ratios. Mater. Sci. Forum 555, 545–552 (2007)
Manea, G.: Machine Design (in Romanian),vol. 1, p. 542, Ed. Tehnica, Bucuresti (1970)
Dowling, N.E.: Mechanical Behavior of Materials. Pretince-Hall, Englewood Cliffs (1993)
Welsh, J.S., Adams, D.: Development of a true triaxial testing facility for composite materials. In: Multiaxial Fatigue and Deformation, ASTM STP 1387. ASTM, West Conshohocken, pp. 423–436 (2000)
Hill, R.: Constitutive modeling of orthotropic plasticity in sheet metals. J. Mech. Phys. Solids 38, 405–417 (1990)
Barlat, F., Brem, J.C., Yoon, J.C., et al.: Plane stress yield function for aluminium alloy sheet—part I: theory. Int. J. Plast. 19, 1297–1319 (2003)
Merklein, M., Biasutti, M.: Development of biaxial tensile machine for characterization of sheet metals. J. Mater. Process. Technol. 213, 939–946 (2013)
Norton, R.: Machine Design. An Integrated Approach, 3rd edn. Pearson/Prentice Hall, New Jersey (2006). ISBN 0-13-14190-8
Olsson, A.: Stainless steel plasticity. Material modelling and structural applications. Lulea University of Technology, Doctoral thesis (2001)
Tao, R., Feng, Z.: A universal fracture criterion for high-strength materials, Scientific Reports, 3, 1117. doi:10.1038/srep01117
Yoon, J.W., Barlat, F., et al.: Plane stress yield function for aluminum alloy sheets–part II: FE formulation and its implementation. Int. J. Plast. 20, 495–522 (2004)
Merklein, M., Biasutti, M.: Development of a biaxial tensile machine for characterization of sheet metals. J. Mater. Process. Technol. 213, 939–946 (2013)
Kulawinski, D., Nagel, K., Henkel, S., et al.: Characterization of stress-strain behavior of a cast TRIP steel under different biaxial planar load ratios. Eng. Fract. Mech. 78, 1684–1695 (2011)
Hu, W.: A novel quadratic yield model to describe the feature of multi-yield-surface of rolled sheet metals. Int. J. Plast. 23, 2004–2028 (2007)
Hu, W.: An orthotropic yield criterion in a 3-D general stress state. Int. J. Plast. 21, 1771–1796 (2005)
Donato, G., Bianchi, M.: Numerical modeling of uneven thermoplastic polymers behaviour using experimental stress-strain data and pressure dependent von Mises yield criteria to improve design practices. Procedia Eng. 10, 1871–1876 (2011)
Donato, G., Bianchi, M.: Pressure dependent yield criteria applied for improving design practices and integrity assessments against yielding of engineering polymers. J. Mater. Res. Technol. 1(1), 2–7 (2012). doi:10.1016/S2238-7854(12)70002-9
Chen, L., Wen, W., Cui, H.: Yielding description for a Ni\(_{3}\)Al based intermetallic alloy. Mater. Des. 41, 192–197 (2012)
Altenbach, H.: Generalized failure criterion for three-dimensional behaviour of isotropic materials. Eng. Fract. Mech. 54(1), 75–90 (1996)
Tanner, R., Tanner, E.: Heinrich Hencky: a rheological pioneer. Rheol. Acta 42, 93–101 (2003)
Acknowledgments
This work was supported by the strategic Grant POSDRU/159/1.5/S/133652, co-financed by the European Social Fund within the Sectorial Operational Programme Human Resources Development 2007 – 2013.
The authors express the gratitude to both colleagues Prof. Dan Scurtu and Dr.Eng. Ciprian Stamate, who drawn the diagrams presented in this paper, using Mathcad software.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Barsanescu, P.D., Comanici, A.M. von Mises hypothesis revised. Acta Mech 228, 433–446 (2017). https://doi.org/10.1007/s00707-016-1706-2
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00707-016-1706-2