Abstract
The influence of a new processing additive (fine particles of boron nitride) on the rheology and processability of polyolefins is studied. The equipment used includes an Instron capillary rheometer equipped with capillary and special annular dies (Nokia Maillefer wire coating crosshead) and two rheometers, namely a parallel-plate and a sliding-plate rheometer. Several types of boron nitride powders, varying in average particle size and distribution and in morphology are tested at various concentration levels. The additive with the smallest average particle size and free of agglomeration was found to have the greatest influence on the processability (melt fracture performance) of the polyolefins tested. Specifically, it was found that boron nitride not only eliminates surface melt fracture but also postpones the critical shear rate for the onset of gross melt fracture to significantly higher values, depending on the additive concentration, surface energy, and morphology. A flow visualization technique was used to visualize the polymer flow at the entrance of a transparent capillary die in order to determine the mechanism by which boron nitride eliminates gross melt fracture.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
Author information
Authors and Affiliations
Additional information
Received: 18 January 2000 Accepted: 15 June 2000
Rights and permissions
About this article
Cite this article
Kazatchkov, I., Yip, F. & Hatzikiriakos, S. The effect of boron nitride on the rheology and processing of polyolefins. Rheol. Acta 39, 583–594 (2000). https://doi.org/10.1007/s003970000113
Issue Date:
DOI: https://doi.org/10.1007/s003970000113