Abstract.
In Part I the bubble inflation test was used to measure the stress-strain relationship of dough. A large disagreement was found between the stress-strain curve based on experimental data and the curve derived from Bloksma's analytical model. In Part II, a numerical simulation of the bubble inflation test is performed using Finite Element Analysis, in order to obtain further information regarding the accuracy of the analytical predictions. A hyperelastic model is assumed for the dough, with a strain energy potential described by the compressible form of the Mooney-Rivlin model. Four cases were investigated, corresponding to various combinations of material parameters of the Mooney-Rivlin model. The numerical results reinforce the conclusions drawn in Part I of the study, specifically that Bloksma's analysis of the bubble inflation could lead to large errors in the stress-strain curve. It was further concluded that the accuracy of the analysis was dependent on the material properties. For a neo-Hookeian material, the analysis leads to accurate results. This is because, for this material, all the assumptions made in the analysis regarding the bubble shape, the material's incompressibility and the bubble wall thickness distribution are accurate.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
Author information
Authors and Affiliations
Additional information
Electronic Publication
Rights and permissions
About this article
Cite this article
Charalambides, M.N., Wanigasooriya, L. & Williams, G.J. Biaxial deformation of dough using the bubble inflation technique. II. Numerical modelling. Rheol Acta 41, 541–548 (2002). https://doi.org/10.1007/s00397-002-0243-1
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/s00397-002-0243-1