Abstract
A xylanase gene, xynAS27, was isolated from a genomic library of Streptomyces sp. S27. The full-length gene consists of 1,434 bp and encodes 477 amino acids, including a putative signal peptide of 41 residues at its N-terminus. The mature xylanase comprises two functional domains, a family 10 glycoside hydrolase, and a family 13 carbohydrate-binding module (CBM), which were joined by a short Gly/Pro-rich linker region. The intact, the CBM-truncated and the CBM-linker-truncated versions of the mature proteins were expressed in Escherichia coli BL21 (DE3), purified to electrophoretic homogeneity and subsequently characterized. XynAS27 showed high pH stability over the pH range 2.2–12.0. XynAS27 may be a compelling tool for the food industry because it generates xylobiose (85% w/w) as the main product of xylan hydrolysis. The truncated versions showed less pH and thermal stability, and less affinity and hydrolytic activity to insoluble substrate than the intact one. These results indicate that the CBM of XynAS27 plays a key role in the hydrolysis of insoluble substrate, and the CBM and linker region are also important for the enzyme stability, and the linker region contributes more.
Similar content being viewed by others
Avoid common mistakes on your manuscript.
Introduction
Xylan, one of the main components of hemicelluloses in plant cell walls, is the second most abundant renewable polysaccharide in nature (after cellulose; Prade 1996). Xylanases (EC 3.2.1.8) can hydrolyze β-1,4-glycosidic linkages in the xylan backbone into short xylooligosaccharides (Biely 1985). In recent years, xylanases have attracted considerable research interest due to their widespread potential applications in the food, animal feed, textile, waste-treatment, paper, and biofuel industries.
On the basis of primary structure comparisons of the catalytic domains, glycosidases have been grouped into 112 families of related sequences (refer to the carbohydrate-active enzyme CAZy server at http://www.cazy.org/fam/acc_GH.html). Xylanases are normally reported as being confined to glycoside hydrolase (GH) families 10 and 11 (Collins et al. 2005). Most xylanases in GH10 have multi-domain structures with a catalytic domain, one or more carbohydrate-binding modules (CBMs), and/or other functional domains joined by linker sequences (Ohmiya et al. 1997). CBMs are also divided into families based on amino acid sequence similarity. Currently, there are 52 defined CBM families (http://www.cazy.org/fam/acc_CBM.html).
In general, CBMs are appended to glycoside hydrolases that degrade insoluble polysaccharides (Boraston et al. 2004). Proteolytic excision or genetic truncation of CBMs from the catalytic modules results in a significant decrease in the binding ability or catalytic activity of the enzymes on insoluble substrates. For example, the family 9 CBM of Clostridium stercorarium xylanase (Xyn10B) (Ali et al. 2001), and family 22 CBM of Clostridium thermocellum xylanase (Xyn10C) (Ali et al. 2005b) showed high affinity to insoluble xylan. It is also reported that CBMs could enhance the stability of enzymes (Sunna et al. 2000; Ali et al. 2005a). However, Dias et al. (2004) reported that the thermal stability of the xylanase 10B from C. thermocellum was dependent on the linker region connecting CBM22 to the N-terminus of catalytic module instead of CBM. In this study, we cloned a GH10 xylanase (XynAS27) from Streptomyces sp. S27, which contained a catalytic domain, a CBM13 and a linker region between them. Then, we expressed and characterized the intact and the CBM with/without linker-region-truncated versions of XynAS27. The properties of these proteins were compared and analyzed. The results indicated that both the CBM and linker region had significant effect on the stability of XynAS27, and the linker region contributed more.
Materials and methods
Bacterial strains, plasmids and reagents
Streptomyces sp. S27, which exhibited xylanolytic activity, was isolated from the soil of Flaming Mountain in the Turpan Basin of Xinjiang, China, and we already cloned a GH11 xylanase from Streptomyces sp. S27 (Li et al. 2008b). Escherichia coli JM109 and BL21 (DE3) cells were grown aerobically in Luria–Bertani (LB) broth medium or agar plate supplemented with 100 μg ml−1 ampicillin at 37°C for recombinant plasmid amplification and gene expression, respectively. The plasmid pUC19 (TaKaRa, Otsu, Japan) and the pGEM-T Easy vector (Promega, Madison, WI, USA) were used for plasmid preparations and gene cloning. The pET-22b(+) vector (Novagen, San Diego, CA, USA) was used for gene expression. The DNA purification kit, restriction endonucleases, T4 DNA ligase and LA Taq DNA polymerase with GC Buffer were purchased from TaKaRa. Oat spelt xylan and birchwood xylan were purchased from Sigma (St. Louis, MO, USA). The standard xylooligosaccharides, xylose, xylobiose, and xylotriose, were purchased from Wako Pure Chemical (Osaka, Japan); xylotetraose and xylopentanose were purchased from Megazyme (Bray, Ireland). All other chemicals were of analytical grade.
Gene cloning
The xylanase gene (xynAS27) fragment from Streptomyces sp. S27 was amplified by polymerase chain reaction (PCR) with a set of degenerate primers (Sxyn10F, 5′-TGGGACGTSGTSAACGAG-3′; Sxyn10R, 5′-GGATGTCSAGYTCSGTGA-3′; S and Y indicate C/G and T/C, respectively; Li et al. 2008c). Genomic DNA of strain S27 was isolated and used as the template. PCR was performed using LA Taq DNA polymerase with GC Buffer. The amplified product was purified and ligated with pGEM-T Easy vector for sequencing.
A genomic library was constructed as described (Li et al. 2008c). A colony PCR method (Bottoli et al. 1999) was used for the target gene isolation with two specific synthetic primers: SF (5′-CACCGGCAACGACTGGATCGAG-3′) and SR (5′-ACTCCTGCAGCGTGGTGCGG-3′). The clone carrying the candidate fragment was obtained, and the recombinant plasmid was isolated and sequenced.
Construction of expression plasmids
For the construction and expression of the mature peptide (without the predicted signal peptide) of XynAS27, the following primers were used: S27F (5′-TACCATGGCCGAGAGCACGCTCGGCGCC-3′) containing an NcoI site (italicized) and S27R1 (5′-TATAAGCTTTCAGGCGCGGGTCCAGCGCTGGTTG-3′) containing a HindIII site (italicized). The truncated derivatives, xynAS27cd (CBM-linker-truncated version) and xynAS27cdl (CBM-truncated version) were amplified using the primers S27F and S27R2 (5′-TATAAGCTTTCAGAGTGCGTCGAGGACGGCGGTG-3′) or S27R3 (5′-TATAAGCTTTCAGCCGTCCCCGGGCGGCGGAG-3′), containing the HindIII sites (italicized). The PCR products were purified from an agarose gel, digested with NcoI and HindIII, and inserted into pET-22b(+) treated with the same restriction endonucleases. The recombinant plasmids, p-xynAS27, p-xynAS27cd, and p-xynAS27cdl, were transformed into E. coli BL21 (DE3) competent cells and confirmed by sequencing.
Expression and purification of the recombinant proteins
Cultivation and inductive expression of the recombinant proteins were conducted following the same procedure as described previously (Li et al. 2008a). For purification of the recombinant XynAS27, the supernatant of the culture was collected by centrifugation and concentrated using a Vivaflow 200 system (Vivascience, Hannover, Germany). The concentrated supernatant was loaded on a HiTrap Q Sepharose XL FPLC column (GE Healthcare, Uppsala, Sweden) previously equilibrated with buffer A (20 mM Tris–HCl, pH 8.5). Elution was performed with a linear gradient of NaCl from 0 to 1 M in buffer A for ten column volumes at a flow rate of 3 ml min−1. Fractions exhibiting xylanolytic activity were combined, concentrated and loaded onto a Superdex 75 10/300 GL column (GE Healthcare) that was equilibrated with buffer B (50 mM phosphate buffer, pH 6.5). Proteins were eluted with one column volume of buffer B at a flow rate of 0.5 ml. The fractions containing XynAS27 were collected and concentrated.
XynAS27cd and XynAS27cdl were purified by HiTrap Q Sepharose XL FPLC column using the same method described above. The fractions with enzyme activity were concentrated and stored at 4°C before characterization.
The homogeneity of the purified enzyme was evaluated by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE), using a 12% running gel (Laemmli 1970). The low-molecular weight calibration kit for SDS electrophoresis (GE Healthcare) was used as a standard. The proteins were visualized by staining with Coomassie brilliant blue R-250. The protein concentration was determined by the Bradford method (Bradford 1976) using bovine serum albumin as the standard.
Xylanase activity assay
Xylanase activity was determined by measuring the release of reducing sugar from soluble oat spelt xylan using the 3,5-dinitrosalicylic acid (DNS) method (Miller 1959) with xylose as the standard. To prepare 1% (w/v) soluble xylan, 1 gram of xylan was suspended in 100 ml McIlvaine buffer (0.2 M Na2HPO4/0.1 M citric acid) at pH 6.5, and heated in a boiling water bath for 10 min. The supernatant was obtained as soluble xylan after centrifugation (10,000×g, 5 min). The assay was performed as described by Li et al. (2008a).
Enzymatic characterization
The optimal pH was determined with soluble oat spelt xylan in buffers at pH 2.2–12.0 at 55°C. The buffers used were McIlvaine buffer for pH 2.2 to 8.0, 0.1 M Tris–HCl for pH 8.0 to 9.0, and 0.1 M glycine–NaOH for pH 9.0 to 12.0. For pH stability, the enzyme was pre-incubated without substrate in buffers of different pH for 1 h at 37°C, and then the xylanolytic activity was measured under standard conditions.
The optimal temperature was determined at pH 6.5 (McIlvaine buffer) from 20°C to 80°C. The thermostability was monitored by pre-incubating the enzyme without substrate in McIlvaine buffer (pH 6.5) for various periods at 65°C. The residual enzyme activity in each case was then assayed under standard assay conditions.
The effect of different metal ions and chemical reagents on the recombinant enzyme activity was assessed with soluble oat spelt xylan in 0.1 M phosphate buffer (pH 6.5) at 60°C. The reactions contained 1 mM or 10 mM of NaCl, KCl, CaCl2, LiCl, CoCl2, NiSO4, CuSO4, MgSO4, FeCl3, ZnSO4, Pb(CH3COO)2, FeSO4, AgNO3, HgCl2, SDS, EDTA, or β-mercaptoethanol.
The K m, V max, and k cat values for the purified recombinant enzymes were analyzed by the Lineweaver–Burk method. The enzyme activity was assayed at 60°C in McIlvaine buffer (pH 6.5) containing 1–10 mg ml−1 soluble oat spelt xylan or birchwood xylan as substrate.
The analysis of hydrolysis products degraded by the purified enzymes was carried out using high-performance anion-exchange chromatography (HPAEC) as described previously (Li et al. 2008b).
Insoluble substrate degradation and binding assays
Insoluble xylan was prepared from oat spelt xylan using the method of Irwin et al. (1994) with slight modifications. Xylan (2 g) was suspended in 40 ml deionized water, then the pH was adjusted to 10.0 with 1 M NaOH and the solution was stirred gently at room temperature for 1 h. The xylan suspension was centrifuged at 3,000×g for 5 min, resuspended in deionized water, and heated in a boiling water bath for 10 min with gentle stirring. The suspension was then centrifuged (3,000×g, 5 min) and washed twice with deionized water and finally with McIlvaine buffer (pH 6.5). The pellet was then suspended in 20 ml 95% ethanol and filtered though Whatman No. 1 filter paper. The pellet was dried and ground as finely as possible with a mortar and pestle.
The degradation of insoluble oat spelt xylan by the purified xylanases was tested under standard conditions using McIlvaine buffer (pH 6.5) containing 1% (w/v) insoluble xylan as the substrate. The activity of the purified enzymes on soluble oat spelt xylan was used as positive control. The affinity of the xylanases to insoluble xylan or microcrystalline cellulose (MC) was measured as follows: the purified enzyme (1 U) was mixed with 0.05 g insoluble oat spelt xylan or MC (Shanghai Hengxin Chemical, Shanghai, China) suspended in 500 μl McIlvaine buffer (pH 6.5). After 1 h of gentle shaking at 20°C, the preparation was centrifuged at 10,000×g for 5 min and the xylanase activity in the supernatant was determined. The loss of activity from the supernatant was assumed to be due to the loss of purified enzymes which bound to the pelleted insoluble xylan or MC.
Nucleotide sequence accession numbers
The nucleotide sequence for the Streptomyces sp. S27 xylanase gene (xynAS27) was deposited in the GenBank database under accession number EU660498.
Results
Cloning and sequence analysis of the xylanase
A 352-bp DNA fragment of xylanase was amplified from Streptomyces sp. S27 by PCR using degenerate primers and sequenced. The primers S9F and S9R were synthesized based on the partially identified sequence, and used for PCR screening of the Streptomyces sp. S27 genomic library. Approximately 3,000 transformants were screened, and one clone (PS2920) contained the gene xynAS27. The insert of the plasmid DNA from PS2920 is approximately 6 kb, including a complete open reading frame (ORF) of 1,434 bp. The ORF has about 67.7% G + C content, starts with an ATG, and terminates with a TGA codon. The ORF encodes a 477-residue polypeptide that includes a signal peptide of 41 residues.
The deduced amino acid sequence of the ORF was aligned with available protein sequences from the GenBank database. The highest identity was 87.8% with the xylanase A from Streptomyces coelicolor A3(2) (GenBank accession no. CAD55241) for which the genome was sequenced, followed by a xylanase A precursor from Streptomyces lividans (87.6%, AAC26525). On the basis of homology comparison in GenBank, the residues Ala42 to Leu341 of XynAS27 correspond to the catalytic domain of xylanases belonging to GH10. Two putative catalytic site residues, Glu169 and Glu277, are located in the catalytic domain (Moreau et al. 1994; Fujimoto et al. 2000). Downstream of the catalytic domain is a 124-residue sequence (Asn354 to Ala477) exhibiting a high degree of similarity to CBM13 which is made of three similar subdomains, α-, β- and γ-subdomain (Fujimoto et al. 2000; Fig. 1). Between the catalytic domain and CBM13 there is a short Gly/Pro-rich region from Asn342 to Gly353, which potentially acts as a linker (Fig. 1).
Expression and purification of the recombinant proteins
The gene fragments of xynAS27, xynAS27cd, and xynAS27cdl obtained by PCR amplification with the genomic DNA of Streptomyces sp. S27 as a template contained 1,308, 900 and 936-bp encoding 436 (Ala42 to Ala477), 300 (Ala42 to Leu341), and 312 (Ala42 to Gly353) amino acid residues, respectively. After induction with IPTG, the xylanase activity in the medium supernatant was 9.8, 5.2 and 24.6 U ml−1, respectively.
The recombinant xylanases in the culture supernatants were purified to electrophoretic homogeneity by ion exchange chromatography or gel filtration chromatography. The resulting specific activity of the purified XynAS27, XynAS27cd, and XynAS27cdl was 790.7, 1,278.8, and 1,250.7 U mg−1, respectively. SDS-PAGE analysis revealed protein bands with sizes of about 47 kDa (XynAS27), 33 kDa (XynAS27cd), and 34 kDa (XynAS27cdl), corresponding to the predicted sizes (Fig. 2).
Effect of pH and temperature on enzyme activity and stability
XynAS27 and XynAS27cd had optimal activity at pH 6.5 and 60°C, and XynAS27cdl showed optimal activity at pH 5.5 and 65°C (Fig. 3a and b). Both truncated versions changed the profiles of pH or temperature versus enzyme activity in some degrees. The pH stability assays showed that no significant loss of activity occurred to XynAS27 during 1-h pretreatment in pH ranging from 2.2 to 12.0. In the case of XynAS27cd and XynAS27cdl, the stability drastically decreased when the pretreatment pH was above 10.0 (Fig. 3c). XynAS27 had good thermal stability, retaining about 25% of the initial activity after preincubation without substrate for 1 h at 65°C. Under the same conditions, XynAS27cdl was almost inactive and XynAS27cd lost all activity after incubation at 65°C for only 5 min (Fig. 3d).
Effect of various metal ions and chemical reagents on enzyme activity
Addition of most reagents under test had little effect on the activity of the three purified xylanases. The activities of these enzymes were almost completely inhibited by Hg2+ and SDS, and strongly inhibited by Cu2+. The metal ion, Ag+ (1 mM), inhibited about 60% of the activity of XynAS27, and less than 20% of the activities of XynAS27cd and XynAS27cdl. In the presence of 10 mM Fe3+, Zn2+, Pb2+, Co2+, or Ni2+, the activity of XynAS27 was partially inhibited, and the activities of both truncated versions were inhibited only a little by them. β-mercaptoethanol (10 mM) enhanced the activities of XynAS27, XynAS27cd, and XynAS27cdl by about 1.5-, 1.7-, and 1.4-fold, respectively.
Kinetic analysis
The K m, V max, and k cat values for XynAS27, XynAS27cd, and XynAS27cdl are shown in Table 1. The K m and V max values for XynAS27cd and XynAS27cdl were a little higher than those for XynAS27.
Analysis of hydrolysis products
The products generated by hydrolysis of soluble oat spelt xylan and birchwood xylan by purified XynAS27, XynAS27cd, and XynAS27cdl were analyzed by HPAEC. As shown in Fig. 4, xylose and xylobiose were the major hydrolysis products after degradation with XynAS27. For all of the three enzymes and both substrates, the composition and proportion of the hydrolysis products was quite similar. After 12 h of incubation, about 15% (w/w) of the total reaction products was xylose, and 85% was xylobiose.
Degradation of insoluble xylan and binding assays
The activity of three enzymes on the insoluble oat spelt xylan was tested under the standard conditions. Comparing with the soluble xylan, the activities of XynAS27, XynAS27cd, and XynAS27cdl on the insoluble xylan were lower, about 56%, 23% and 24% of the activities on soluble substrate, respectively. For the binding studies, CBM13 showed strong binding ability to insoluble xylan and MC. XynAS27 could bind nearly completely to insoluble xylan and MC; however, XynAS27cd and XynAS27cdl were unable to adhere to insoluble xylan, and only about 20% of both truncated versions could bind to MC.
Discussion
Several Streptomyces species that are very active in the biochemical decomposition of lignocellulosic biomass produce considerable amounts of xylanases (Johnson et al. 1988; Shareck et al. 1991; Jiang et al. 2006). In this study, we cloned, expressed and characterized a xylanase (XynAS27) from Streptomyces sp. S27. XynAS27 showed very high pH stability and predominantly generated xylobiose as the hydrolysis products. In comparison with the carboxyl-terminal truncated versions, XynAS27 also displayed better affinity and higher hydrolytic activity to insoluble xylan, and exhibited better thermal and pH stability.
XynAS27 showed some distinct enzymatic properties when compared with other highly identical xylanases, such as xylanase A from S. lividans, XYNA from S. olivaceoviridis and SfXyn10 from Streptomyces fradiae. They shared the same optimal temperature of 60°C, but varied in the optimal pH: XynAS27 (pH 6.5), xylanase A (pH 6.0; Morosoli et al. 1986), XYFA (pH 5.6; Zhang et al. 2002), and SfXyn10 (pH 7.8; Li et al. 2008c). Furthermore, XynAS27 showed good thermal stability, retaining more than 85% of the initial activity after incubation at 60°C for 1 h (data not shown). Under the same conditions, xylanase A from S. lividans retained only 30% of the initial activity (Morosoli et al. 1986), and SfXyn10 from S. fradiae was almost inactive after incubation at 60°C for 30 min (Li et al. 2008c). XynAS27 also showed high pH stability over a wide pH range, maintaining over 80% of the activity after treatment in buffers ranging from pH 2.2 to 12.0 at 37°C for 1 h. But most xylanases, such as SfXyn10 from S. fradiae (Li et al. 2008c), STX-I from Streptomyces thermoviolaceus (Tsujibo et al. 1992), Xys1 from Streptomyces halstedii (Ruiz-Arribas et al. 1995) and a xylanase from B. halodurans (Mamo et al. 2006), maintained stable only in the range of pH 4.0–10.0 or pH 5.0–9.0. XynAS9 from Streptomyces sp. S9 retained good stability over the much wider pH range of 4.0–12.0 (Li et al. 2008a), but failed under extreme acidic condition in comparison with XynAS27. Few GH10 xylanases from bacteria could retain stable in both the acid and alkaline pH range. With regard to the effects of various metal ions and chemical reagents, the activity of XynAS27 was completely inhibited by SDS, and was not affected by Fe2+ (data not shown). In contrast, SDS had little effect on the activity of XYNA from S. olivaceoviridis (Zhang et al. 2002), and Fe2+ could completely inhibit the activity of STX-I from S. thermoviolaceus (Tsujibo et al. 1992).
The major products of xylan hydrolysis by XynAS27 were xylose and xylobiose. Similar hydrolysis products have been reported from many xylanases (Tsujibo et al. 1992; Ali et al. 1999; Li et al. 2008a). XynBS27 from Streptomyces sp. S27 (Li et al. 2008b), XynB from Thermotoga maritima (Jiang et al. 2004) and an endoxylanase from Bacillus sp. (Jeong et al. 1998) hydrolyzed xylan to produce about 75%, 66%, and 60% xylobiose, respectively. XynAS27 released about 85% of the total reaction products as xylobiose after incubation with xylan for 12 h. Xylobiose stimulates the growth of intestinal Bifidobacteria, which is beneficial for human health in that it inhibits proliferation of pathogenic bacteria and promotes absorption of nutrients (Moure et al. 2006). As a food ingredient, xylobiose is also used in anti-obesity diets because it is low in calories and does not produce dental caries (Vázquez et al. 2000). However, production of xylobiose is time-consuming and costly (Moure et al. 2006). Thus, the application of XynAS27 to produce xylobiose is attractive.
XynAS27 from Streptomyces sp. S27 contains a (β/α)8-barrel of the GH10 catalytic domain, a family 13 CBM, and a Gly/Pro-rich linker region between them. The CBM of XynAS27 exhibited high sequence identity (92.6%) to that of the xylanase (FXYN) from S. olivaceoviridis E-86 (PDB ID: 1XYF). The crystal structure of FXYN containing the CBM13 has been studied by Fujimoto et al. (2000; 2002) and CBM13 has been found to have a structure similar to ricin B-chain. CBM13 has three similar subdomains, as suggested from a triple-repeat sequence, which are assembled against one another around a pseudo-threefold axis (Fujimoto et al. 2000). The triple-repeated sequences have been referred to as the (Gln-X-Trp)3-domain (Hazes 1996), and CBM13 in XynAS27 displays the typical triple-repeated sequences (Fig. 1). Gln probably plays an important role in substrate binding, and Trp may be involved in the formation of the hydrophobic core (Fujimoto et al. 2000).
To evaluate the role of CBM13 in XynAS27, the enzyme activity and binding ability of the CBM-truncated version (XynAS27cdl) were compared with those of XynAS27. The catalytic activity on insoluble xylan of XynAS27cdl was less than half of that by XynAS27. It suggests that CBM13 could enhance the activity of XynAS27 on insoluble xylan, presumably by increasing the frequency of encounters between the catalytic domain and insoluble substrate. The results from the binding assays support the role of CBM13 in increasing the interaction with insoluble substrates. XynAS27 could completely bind to insoluble xylan and MC, but the CBM-truncated version failed to bind to insoluble xylan and bound MC less efficiently than did XynAS27. The binding ability to insoluble substrates has been reported for many other CBMs (Ali et al 2001; Mangala et al. 2003; Ali et al. 2005a).
Removal of CBM13 and linker region could affect the enzymatic properties of XynAS27, particularly the enzyme stability. XynAS27 displayed better pH stability than the two truncated versions, indicating that CBM13 and linker region of XynAS27 played an important role in pH stability. A similar phenomenon has been detected for Xys1L with a family 2 CBM from S. halstedii JM8 (Ruiz-Arribas et al. 1995, 1997). However, fusion of the B. halodurans xylanase and a family 6 CBM did not modify the pH activity and stability (Mangala et al. 2003). In some reports, the thermal stability of the fusion of CBM with catalytic domains was less than that of the original one (Kataeva et al. 2001; Mamo et al. 2007). In the other reports, fusion of CBM had no effect or resulted in a better thermal stability (Mangala et al. 2003; Ali et al. 2005a, b). However, some data suggested that the small linker between CBM and catalytic domain but CBM made a significant contribution to the overall stability of the xylanase (Dias et al. 2004). In this study, the thermal stability of XynAS27cdl was worse than that of XynAS27, but fairly better than that of XynAS27cd. This result indicated that the linker region of XynAS27 displayed an important effect on thermal stability, and CBM13 also contributed to the enzyme stability.
In conclusion, XynAS27 from Streptomyces sp. S27 displayed high pH stability from pH 2.2 to 12.0, and produced xylobiose as the predominant hydrolysis product. These favorable properties make XynAS27 a promising candidate for various applications. Comparative study of enzymatic properties, hydrolytic activity, and binding assays indicate that CBM13 of XynAS27 is not only responsible for binding to insoluble substrates, but also contributes to the thermal and pH stability of the enzyme. Furthermore, the linker region connecting CBM and catalytic domain plays a more important role in the enzyme stability. Future studies will help us achieve a better understanding of the structure–function relationship of enzyme.
References
Ali E, Araki R, Zhao G, Sakka M, Karita S, Kimura T, Sakka K (2005a) Functions of family-22 carbohydrate-binding modules in Clostridium josui Xyn10A. Biosci Biotechnol Biochem 69:2389–2394
Ali E, Zhao G, Sakka M, Kimura T, Ohmiya K, Sakka K (2005b) Functions of family-22 carbohydrate-binding module in Clostridium thermocellum Xyn10C. Biosci Biotechnol Biochem 69:160–165
Ali MK, Fukumura M, Sakano K, Karita S, Kimura T, Sakka K, Ohmiya K (1999) Cloning, sequencing, and expression of the gene encoding the Clostridium stercorarium xylanase C in Escherichia coli. Biosci Biotechnol Biochem 63:1596–1604
Ali MK, Hayashi H, Karita S, Goto M, Kimura T, Sakka K, Ohmiya K (2001) Importance of the carbohydrate-binding module of Clostridium stercorarium Xyn10B to xylan hydrolysis. Biosci Biotechnol Biochem 65:41–47
Biely P (1985) Microbial xylanolytic systems. Trends Biotechnol 3:286–290
Boraston AB, Bolam DN, Gilbert HJ, Davies GJ (2004) Carbohydrate-binding modules: fine-tuning polysaccharide recognition. Biochem J 382:769–781
Bottoli AP, Kertesz-Chaloupková K, Boulianne RP, Granado JD, Aebi M, Kües U (1999) Rapid isolation of genes from an indexed genomic library of C. cinereus in a novel pab1+ cosmid. J Microbiol Methods 35:129–141
Bradford MM (1976) A rapid and sensitive method for the quantitation of microgram quantities of protein utilizing the principle of protein–dye binding. Anal Biochem 72:248–254
Collins T, Gerday C, Feller G (2005) Xylanases, xylanase families and extremophilic xylanases. FEMS Microbiol Rev 29:3–23
Dias FMV, Goyal A, Gilbert HJ, Prates JAM, Ferreira LMA, Fontes CMGA (2004) The N-terminal family 22 carbohydrate-binding module of xylanase 10B of Clostridium themocellum is not a thermostabilizing domain. FEMS Microbiol Lett 238:71–78
Fujimoto Z, Kuno A, Kaneko S, Kobayashi H, Kusakabe I, Mizuno H (2002) Crystal structures of the sugar complexes of Streptomyces olivaceoviridis E-86 xylanase: sugar binding structure of the family 13 carbohydrate binding module. J Mol Biol 316:65–78
Fujimoto Z, Kuno A, Kaneko S, Yoshida S, Kobayashi H, Kusakabe I, Mizuno H (2000) Crystal structure of Streptomyces olivaceoviridis E-86 β-xylanase containing xylan-binding domain. J Mol Biol 300:575–585
Hazes B (1996) The (QxW)3 domain: a flexible lectin scaffold. Protein Sci 5:1490–1501
Irwin D, Jung ED, Wilson DB (1994) Characterization and sequence of a Thermomonospora fusca xylanase. Appl Environ Microbiol 60:763–770
Jeong KJ, Park IY, Kim MS, Kim SC (1998) High-level expression of an endoxylanase gene from Bacillus sp. in Bacillus subtilis DB104 for the production of xylobiose from xylan. Appl Microbiol Biotechnol 50:113–118
Jiang Z, Deng W, Yan Q, Zhai Q, Li L, Kusakabe I (2006) Subunit composition of a large xylanolytic complex (xylanosome) from Streptomyces olivaceoviridis E-86. J Biotechnol 126:304–312
Jiang ZQ, Deng W, Zhu YP, Li LT, Sheng YJ, Hayashi K (2004) The recombinant xylanase B of Thermotoga maritima is highly xylan specific and produces exclusively xylobiose from xylans, a unique character for industrial applications. J Mol Catal B Enzym 27:207–213
Johnson KG, Harrison BA, Schneider H, MacKenzie CR, Fontana JD (1988) Xylan-hydrolysing enzymes from Streptomyces spp. Enzyme Microb Technol 10:403–409
Kataeva IA, Blum DL, Li X-L, Ljungdahl LG (2001) Do domain interactions of glycosyl hydrolases from Clostridium thermocellum contribute to protein thermostability. Protein Eng 14:167–172
Laemmli UK (1970) Cleavage of structural proteins during the assembly of the head of bacteriophage T4. Nature 227:680–685
Li N, Meng K, Wang Y, Shi P, Luo H, Bai Y, Yang P, Yao B (2008a) Cloning, expression, and characterization of a new xylanase with broad temperature adaptability from Streptomyces sp. S9. Appl Microbiol Biotechnol 80:231–240
Li N, Shi P, Yang P, Wang Y, Luo H, Bai Y, Zhou Z, Yao B (2008b) Cloning, expression, and characterization of a new Streptomyces sp. S27 xylanase for which xylobiose is the main hydrolysis product. Appl Biochem Biotechnol doi:https://doi.org/10.1007/s12010-008-8411-0
Li N, Yang P, Wang Y, Luo H, Meng K, Wu N, Fan Y, Yao B (2008c) Cloning, expression, and characterization of protease-resistant xylanase from Streptomyces fradiae var. k11. J Microbiol Biotechnol 18:410–416
Mamo G, Hatti-Kaul R, Mattiasson B (2006) A thermostable alkaline active endo-β-1-4-xylanase from Bacillus halodurans S7: Purification and characterization. Enzyme Microb Technol 39:1492–1498
Mamo G, Hatti-Kaul R, Mattiasson B (2007) Fusion of carbohydrate binding modules from Thermotoga neapolitana with a family 10 xylanase from Bacillus halodurans S7. Extremophiles 11:169–177
Mangala SL, Kittur FS, Nishimoto M, Sakka K, Ohmiya K, Kitaoka M, Hayashi K (2003) Fusion of family VI cellulose binding domains to Bacillus halodurans xylanase increases its catalytic activity and substrate-binding capacity to insoluble xylan. J Mol Catal B Enzym 21:221–230
Miller GL (1959) Use of dinitrosalicylic acid reagent for determination of reducing sugar. Anal Chem 31:426–428
Moreau A, Roberge M, Manin C, Shareck F, Kluepfel D, Morosoli R (1994) Identification of two acidic residues involved in the catalysis of xylanase A from Streptomyces lividans. Biochem J 302:291–295
Morosoli R, Bertrand JL, Mondou F, Shareck F, Kluepfel D (1986) Purification and properties of a xylanase from Streptomyces lividans. Biochem J 239:587–592
Moure A, Gullón P, Domínguez H, Parajó JC (2006) Advances in the manufacture, purification and applications of xylo-oligosaccharides as food additives and nutraceuticals. Process Biochem 41:1913–1923
Ohmiya K, Sakka K, Karita S, Kimura T (1997) Structure of cellulases and their applications. Biotechnol Genet Eng Rev 14:365–414
Prade RA (1996) Xylanases: from biology to biotechnology. Biotechnol Genet Eng Rev 13:101–131
Ruiz-Arribas A, Fernández-Abalos JM, Sánchez P, Garda AL, Santamariá RI (1995) Overproduction, purification, and biochemical characterization of a xylanase (Xys1) from Streptomyces halstedii JM8. Appl Environ Microbiol 61:2414–2419
Ruiz-Arribas A, Sánchez P, Calvete JJ, Raida M, Fernández-Abalos JM, Santamaría RI (1997) Analysis of xysA, a gene from Streptomyces halstedii JM8 that encodes a 45-kilodalton modular xylanase, Xys1. Appl Environ Microbiol 63:2983–2988
Shareck F, Roy C, Yaguchi M, Morosoli R, Kluepfel D (1991) Sequences of three genes specifying xylanases in Streptomyces lividans. Gene 107:75–82
Sunna A, Gibbs MD, Berqquist PL (2000) A novel thermostable multidomain 1,4-beta-xylanase from ‘Caldibacillus cellulovorans’ and effect of its xylan-binding domain on enzyme activity. Microbiology 146:2947–2955
Tsujibo H, Miyamoto K, Kuda T, Minami K, Sakamoto T, Hasegawa T, Inamori Y (1992) Purification, properties, and partial amino acid sequences of thermostable xylanases from Streptomyces thermoviolaceus OPC-520. Appl Environ Microbiol 58:371–375
Vázquez MJ, Alonso JL, Domínguez H, Parajó JC (2000) Xylooligosaccharides: manufacture and applications. Trends Food Sci Technol 11:387–393
Zhang H, Yao B, Yuan T, Wang Y, Cao S, Fan Y (2002) Purification and properties of 43 kD xylanase XYNA from Streptomyces olivaceoviridis A1. J Agric Biotechnol 10:10–14 (in Chinese)
Acknowledgments
This work was supported by National High Technology Research and Development Program of China (863 Program; No. 2007AA100601) and National Key Technology R&D Program of China (No. 2006BAD12B05-03).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Li, N., Shi, P., Yang, P. et al. A xylanase with high pH stability from Streptomyces sp. S27 and its carbohydrate-binding module with/without linker-region-truncated versions. Appl Microbiol Biotechnol 83, 99–107 (2009). https://doi.org/10.1007/s00253-008-1810-x
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00253-008-1810-x