Abstract
The 6-high continuously variable crown (6-h CVC) cold rolling mill shows limited capability to control coupled edge and center waves for both narrow strip and ultra-wide strip production. In order to solve this problem, an integrated three-dimensional (3D) elastic-plastic finite element model (FEM) of rolls and strip is built to calculate the effect functions in consideration of work roll bending (WRB), intermediate roll bending (IMRB), and CVC intermediate roll shifting (IMRS) with different strip widths. A set of orthogonal vectors which is defined as eigenvectors is proposed to analyze the similarities and the complementarities of the effect functions. It is applied to study the flatness control characteristics of the cold rolling mill. Based on the analysis of flatness stress characteristics of different strip widths in the production, it is found that the similarities between the flatness stress and the eigenvectors of different strip widths are relative low. The flatness defects are difficult to be eliminated. From the relationship between IMRS and strip widths, a segmented CVC intermediate roll contour is then proposed and experimented in an industrial production. The proportion of coupled edge and center waves is decreased by 15.2%, and the overall flatness is reduced by 0.7 IU.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Wang XD, Li F, Li BH, Dong LJ, Zhang BH (2012) Design and application of an optimum backup roll contour configured with CVC work roll in hot strip mill. ISIJ Int 52:1637–1643. https://doi.org/10.2355/isijinternational.52.1637
Ginzburg VB, Ballas R (2000) Flat roll fundamentals. Marcel Dekker, Inc., New York
Linghu KZ, Jiang ZY, Zhao JW, Li F, Wei DB, Xu JZ, Zhang XM, Zhao XM (2014) 3D FEM analysis of strip shape during multi-pass rolling in a 6-high CVC cold rolling mill. Int J Adv Manuf Technol 74:1733–1745. https://doi.org/10.1007/s00170-014-6069-z
Huang HG, Shi YQ, Ren XY, Du FS (2014) Influence of initial crown of work roll on strip shape adjusting performance of ultra-wide 6-h CVC mill. Iron and Steel 49:88–93. https://doi.org/10.13228/j.boyuan.issn0449-749x.2014.07.004
Linghu KZ, Jiang ZY, Li F, Zhao JW, Yu M, Wang YQ (2014) FEM analysis of profile control capability during rolling in a 6-high CVC cold rolling mill. Adv Mater Res 988:257–262. https://doi.org/10.4028/www.scientific.net/AMR.988.257
Liu HM, Zheng ZZ, Peng Y (2000) Computer simulation of the roll contact pressure character for 6-high CVC wide strip mill. Journal of Mechanical Engineering 36:69–73
Li HB, Zhang J, Cao JG, Cheng FW, Hu WD, Zhang Y (2012) Roll contour and strip profile control characteristics for quintic CVC work roll. Journal of Mechanical Engineering 48:24–30
Yang GH, Zhang J, Cao JG, Li HB, Huang QB (2016) Effect of different stands of 2180mm tandem cold rolling mill on shape control of products. J Beijing Inst Technol 36:1111–1116. https://doi.org/10.15918/j.tbit1001-0645.2016.11.003
Bao RR, Zhang J, Li HB, Jia SH, Liu HJ, Li XJ (2015) Influence of asymmetric flatness errors on strip wandering in continuous annealing lines. Iron and Steel 50:35–38. https://doi.org/10.13228/j.boyuan.issn0449-749x.20140726
Zhang QD, Huang LW, Zhou XM (2000) Comparative study on shape control technologies for wide strip mill. J Univ Sci Technol Beijing 22:177–181. https://doi.org/10.13374/j.issn100-053x.2000.02.023
Wang RZ, He AR, Yang Q, Zhao L, Dong HR (2006) Profile control capability of LVC work roll contour. Iron Steel 41:41–44. https://doi.org/10.13228/j.boyuan.issn0449-749x.2006.05.010
Wang QL, Sun J, Li X, Liu YM, Wang PF, Zhang DH (2018) Numerical and experimental analysis of strip cross-directional control and flatness prediction for UCM cold rolling mill. J Manuf Process 34:637–649. https://doi.org/10.1016/j.jmapro.2018.07.008
Rosenthal D (1988) CVC technology on hot and cold strip rolling mills. Rev Met Cahiers D'Inform Tech 85:597–606. https://doi.org/10.1051/metal/198885070597
Bald W, Klamma K (1988) CVC technology for cold rolling mills-plant examples. Iron Steel Eng 65:24–28
Wang CS, Zhang YP, Zhang QD (1999) Application of evaluation function in cold mill shape control. Steel Rolling 4:28–30. https://doi.org/10.13228/j.boyuan.issn1003-9996.1999.04.011
Zhang YP, Wang CS (1999) Flatness control strategy on cold mill based on efficiency function. J Univ Sci Technol Beijing 21:195–197. https://doi.org/10.13374/j.issn100-053x.1999.02.056
Liu HM, Zhang XL, Wang YR (2005) Transfer matrix method of flatness control for strip mills. J Mater Process Technol 166:237–242. https://doi.org/10.1016/j.jmatprotec.2004.08.018
Song L, Shen MG, Yang LP, Liu J, Wang JS, Chen XB (2016) Shape control dimensionality reduction efficiency inherited regulation method of cold rolling wide strip. Iron Steel 51:70–75. https://doi.org/10.13228/j.boyuan.issn0449-749x.20150083
Yan QT, Zhang J, Jia SH, Chu YG, Yang GH, Gong Y (2011) Research on analyzing the flatness adjusting capacity for cold mill and its application. J Mech Eng 47:77–81. https://doi.org/10.3901/JME.2011.04.077
Ataka M (2015) Rolling technology and theory for the last 100 years: the contribution of theory to innovation in strip rolling technology. ISIJ Int 55:89–102. https://doi.org/10.2355/isijinternational.55.89
Moazeni B, Salimi M (2015) Investigations on relations between shape defects and thickness profile variations in thin flat rolling. Int J Adv Manuf Tech 77:1315–1331. https://doi.org/10.1007/s00170-014-6544-6
Lu C, Tieu AK, Jiang ZY (2002) A design of a third-order CVC roll profile. J Mater Process Technol 125:645–648. https://doi.org/10.1016/S0924-0136(02)00373-4
Li YL, Cao JG, Qiu L, Yang GH, He AR, Zhou YZ (2018) Research on ASR work roll contour suitable for all width electrical steel strip during hot rolling process. Int J Adv Manuf Tech 97:3453–3458. https://doi.org/10.1007/s00170-018-2198-0
Cao JG, Chai XT, Li YL, Kong N, Jia SH, Zeng W (2017) Integrated design of roll contours for strip edge drop and crown control in tandem cold rolling mills. J Mater Process Technol 252:432–439. https://doi.org/10.1016/j.jmatprotec.2017.09.038
Xu G, Liu XJ, Zhao JR, Xiong JW (2007) Analysis of CVC roll contour and determination of roll crown. J Univ Sci Technol Beijing 14:378–380. https://doi.org/10.1016/S1005-8850(07)60075-9
Shang F, Li HB, Kong N, Zhang J, Hu C, Zhang C, Chen JF, Mitchell DRG (2017) Improvement in continuously variable crown work roll contour under CVC cyclical shifting mode. Int J Adv Manuf Technol 90:2723–2731. https://doi.org/10.1007/s00170-016-9587-z
Shang F, Li HB, Kong N, Zhang J, Hu C, Chen L, Zhang C, Chen JF (2016) CVC cyclical shifting mode and its working characteristics for the mills of CSP. Int J Adv Manuf Technol 87:1906–1917. https://doi.org/10.1007/s00170-016-8602-8
Park H, Hwang S (2017) 3-D coupled analysis of deformation of the strip and rolls in flat rolling by FEM. Steel Res Int 88:1700227. https://doi.org/10.1002/srin.201700227
Yu HL, Tieu K, Lu C, Deng GY, Liu XH (2013) Occurrence of surface defects on strips during hot rolling process by FEM. Int J Adv Manuf Technol 67:1161–1170. https://doi.org/10.1007/s00170-012-4556-7
Bao RR, Zhang J, Li HB, Jia SH, Liu HJ, Xiao S (2015) Flatness pattern recognition of ultra-wide tandem cold rolling mill. Chin J Eng 37:6–11. https://doi.org/10.13374/j.issn2095-9389.2015.s1.002
Niu PF, Liu C, Li PF, Li GQ (2014) Optimized support vector regression model by improved gravitational search algorithm for flatness pattern recognition. Neural Comput Appl 26:1167–1177. https://doi.org/10.1007/s00521-014-1798-3
Chen XR (1998) Historical backgrounds and present state of the least squares method. J Univ Chin Acad Sci 15:4–11
Li HB, Bao RR, Zhang J, Jia SH, Chu YG, Liu HJ (2016) Cluster analysis of strip flatness characteristics for ultra-wide cold rolling mill. Chin J Eng 38:1569–1575. https://doi.org/10.13374/j.issn2095-9389.2016.11.009
Ester M, Kriegel HP, Sander J, Xu XW (1996) A density-based algorithm for discovering clusters in large spatial databases with noise. In: The Second International Conference on Knowledge Discovery and Data Mining (KDD-96), Portland, USA
Li HB, Zhang J, Cao JG, Wang ZM, Wang Q, Zhang SS (2010) Analysis and selection of crown control ranges for CVC work rolls in CSP hot rolling. J Univ Sci Technol Beijing 32:118–122. https://doi.org/10.13374/j.issn1001-053x.2010.01.002
Liu GM, Di HS, Guang A (2008) Discussion on design of CVC roll profile and its equivalent crown. J North Univ 29:1443–1446
Wei GC, Cao JG, Zhang J, Hai JW, Chen G (2007) Optimization and application of CVC work roll contour on 2250 hot strip mills. J Cent South Univ 38:937–942
Funding
This work is supported by “the National Key Technology R&D Program of the 12th Five-year Plan of China” (grant no. 2015BAF30B01) and “the Fundamental Research Funds For the central Universities” (grant no. FRF-BR-16-025A, FRF-TP-15-016A3). The authors also thank Wuhan Iron & Steel (Group) Corp. for the industrial experiments and financial support.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Li, H., Zhao, Z., Zhang, J. et al. Analysis of flatness control capability based on the effect function and roll contour optimization for 6-h CVC cold rolling mill. Int J Adv Manuf Technol 100, 2387–2399 (2019). https://doi.org/10.1007/s00170-018-2838-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-018-2838-4