Abstract
A newly proposed method for the manufacturing of complex aluminum alloy automobile body panels is the rigid-flexible coupling forming process. The principle of this method is introduced and the key process parameters such as the hydraulic pressure loading path and rigid-flexible effect, blank holder force (BHF), and the draw bead setting are investigated by using numerical simulation and experiment. The relationship between the local rounded corner feature and the hydraulic pressure is theoretically analyzed specifically for the aluminum alloy inner panel of automobile engine hood. Meanwhile, the formability of this part is also surveyed in different parameters of the rigid-flexible coupling process. Finally, the applicability of the proposed method is validated by the results of experiments. The research exhibited that the rigid-flexible coupling forming process can be well used for manufacturing this kind of complex multi-feature sheet parts.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Schöggl JP, Baumgartner RJ, Hofer D (2016) Improving sustainability performance in early phases of product design: a checklist for sustainable product development tested in the automotive industry. J Clean Prod 140:1602–1617
Moon SK, ET Y, Hwang J, Yoon YJ (2014) Application of 3D printing technology for designing light-weight unmanned aerial vehicle wing structures. Int J Precis Eng Manuf-Green Technol 1(3):223–228. https://doi.org/10.1007/s40684-014-0028-x
Saxena KK, Drotleff K, Mukhopadhyay J (2016) Elevated temperature forming limit strain diagrams of automotive alloys Al6014-T4 and DP600: a case study. J Strain Anal Eng Des 51(6):459–470. https://doi.org/10.1177/0309324716651028
Hörhold R, Müller M, Merklein M, Meschut G (2016) Mechanical properties of an innovative shear-clinching technology for ultra-high-strength steel and aluminium in lightweight car body structures. Weld World 6:613–620
Wang ZJ, Zheng LH, Liu ZG, Xiang N, Wang PY (2016) Investigation of viscous pressure forming for 6K21-T4 aluminum alloy car panels. Int J Adv Manuf Technol 85(9-12):2525–2534. https://doi.org/10.1007/s00170-015-8018-x
Choi W, Yeo HT, Park JH, GH O, Park SW (2007) A study on press forming of automotive dub-frame parts using extruded aluminum profile. J Mater Process Technol 180:85–88
Jeon YJ, Song MJ, Kim HK, Cha BS (2015) Effect of hot-stamping process conditions on the changes in material strength. Int J Automot Technol 16(4):619–627. https://doi.org/10.1007/s12239-015-0063-9
Zeng ZP, Zhang YS, Zhou Y, Jin QL (2005) Superplastic forming of aluminum alloy car body panels. Mater Sci Forum 475-479:3025–3028. https://doi.org/10.4028/www.scientific.net/MSF.475-479.3025
Wang Z, Li Y (2008) Formability of 6k21-T4 car panel sheet for viscoelastic–plastic flexible-die forming. J Mater Process Technol 201(1-3):408–412. https://doi.org/10.1016/j.jmatprotec.2007.11.301
Lang LH, Wang YM, Xie YS, Yang XY, YQ X (2012) Pre-bulging effect during sheet hydroforming process of aluminum alloy box with unequal height and flat bottom. Trans Nonferrous Met Soc China 22:302–308
Djavanroodi F, Abbasnejad DS, Nezami EH (2011) Deep drawing of aluminum alloys using a novel hydroforming tooling. Mater Manuf Process 26(5):796–801. https://doi.org/10.1080/10426911003720722
Abedrabbo N, Zampaloni MA, Pourboghrat F (2005) Wrinkling control in aluminum sheet hydroforming. Int J Mech Sci 47(3):333–358. https://doi.org/10.1016/j.ijmecsci.2005.02.003
Brooke L (1997) Hydroforming hits the big time. Automot Ind 177:57–61
Zhang R, Lang L, Zafar R, Lin L, Zhang W (2016) Investigation into thinning and spring back of multilayer metal forming using hydro-mechanical deep drawing (HMDD) for lightweight parts. Int J Adv Manuf Technol 82(5-8):817–826. https://doi.org/10.1007/s00170-015-7415-5
Hu H, Wang JF, Fan KT, Chen TY, Wang SY (2015) Development of sheet hydroforming for making an automobile fuel tank. P I Mech Eng B-J Eng 229:654–663
Palumbo G (2013) Hydroforming a small scale aluminum automotive component using a layered die. Mater Des 44:365–373. https://doi.org/10.1016/j.matdes.2012.08.013
Liu XJ, Liu CH, Wang X, Wan SX, Fu JR (2016) Numerical simulation study on divided region variable blank holder force of automobile outdoor in hydrodynamic deep drawing. Hot Work Technol 45:146–149
Modi B, Kumar DR (2013) Effect of friction and lubrication on formability of AA5182 alloy in hydroforming of square cups. Mater Sci Forum 762:621–626. https://doi.org/10.4028/www.scientific.net/MSF.762.621
Abdelkefi A, Malécot P, Boudeau N, Guermazi N, Haddar N (2016) Evaluation of the friction coefficient in tube hydroforming with the “corner filling test” in a square section die. Int J Adv Manuf Technol 88:2265–2273
Lang LH (2014) Innovative sheet hydroforming and warm/hot hydroforming. National Defense Industry Press, Beijing
Kong DS, Lang LH, Sun ZY, Ruan SW, SS G (2016) A technology to improve the formability of thin-walled aluminum alloy corrugated sheet components using hydroforming. Int J Adv Manuf Technol 84(1-4):737–748. https://doi.org/10.1007/s00170-015-7727-5
Choi H, Koc M, Ni J (2007) A study on the analytical modeling for warm hydro-mechanical deep drawing of lightweight materials. Int J Mach Tools Manuf 47(11):1752–1766. https://doi.org/10.1016/j.ijmachtools.2006.12.005
Meng B, Wan M, Yuan S, XD X, Liu J, Huang ZB (2013) Influence of cavity pressure on hydrodynamic deep drawing of aluminum alloy rectangular box with wide flange. Int J Mech Sci 77:217–226. https://doi.org/10.1016/j.ijmecsci.2013.10.012
Acknowledgments
The authors gratefully acknowledge the financial support from National Science and Technology Major Project of China with Grant No.2014ZX04002041.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Wang, Y., Lang, L., Sherkatghanad, E. et al. Rigid-flexible coupling forming process for aluminum alloy automobile body panels. Int J Adv Manuf Technol 95, 3905–3918 (2018). https://doi.org/10.1007/s00170-017-1494-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-017-1494-4