Abstract
The advantages of PBM (physically based model) over DDM (data-driven model) were presented, and physically based modeling of comprehensive thermal errors of servo axis and spindle was proposed. Based on the theory of frictional heat, heat convection, and heat conduction, the model for thermal error of servo axis was established, and the screw temperature field at any time can be obtained to predict screw thermal error. The thermal bending deformations of spindles were analyzed for a C-type vertical machining center. The models for spindle radial thermal drift error under different deformations were established, and the criterion for determining the deformations was presented. Tests for identifying parameters of the suggested models were carried out on a TC500R vertical machining center. The compensation effects were verified using both experiment and machining. The results indicated that the suggested PBM results in high accuracy and strong robustness, even if the moving state of servo axis and the rotating speed of spindle randomly changed.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Mayr J, Jedrzejewwski J, Uhlmann E (2012) Thermal issues in machine tools. CIRP Ann Manuf Technol 61:771–791
Lee DS, Choi JY, Choi DH (2003) ICA based thermal source extraction and thermal distortion compensation method for a machine tool. Int J Mach Tools Manuf 43(6):589–597
Zhu WB (2004) Research and application of the real-time thermal error compensation system for CNC machine tools. Dissertation, Shanghai Jiao Tong University
Ramesh R, Mannan MA, Poo AN (2000) Error compensation in machine tools—a review part II: thermal errors. Int J Mach Tools Manuf 40:1257–1284
Liu K, Liu Y, Sun MJ, Li XL, Wu YL (2016) Spindle axial thermal growth modeling and compensation on CNC turning machines. Int J Adv Manuf Technol 87(5):2285–2292
Ni J (1997) CNC machine accuracy enhancement through real-time error compensation. J Manuf Sci Eng Trans ASME 119:717–725
Yang J (1998) Error synthetic compensation technique and application for NC machine tools. Dissertation, Shanghai Jiao Tong University
Pajor M, Zapłata J (2011) Compensation of thermal deformations of the feed screw in a CNC machine tool. Adv Manuf Sci Technol 35:9–17
Lei CL, Rui ZY (2012) Thermal error modeling and forecasting based on multivariate autoregressive model for motorized spindle. Mech Sci Technol Aerosp Eng 31:1526–1529
Wu CW, Tang CH, Chang CF, Shiao YS (2011) Thermal error compensation method for machine center. Int J Adv Manuf Technol 59:681–689
Zhu J, Ni J, Shih AJ (2008) Robust machine tool thermal error modeling through thermal mode concept. J Manuf Sci Eng 130:0610061–0610069
Ozkan MT (2013) Experimental and artificial neural network study of heat formation values of drilling and boring operations on Al 7075 T6 workpiece. Indian J Eng Mater Sci 20:259–268
Yang H, Ni J (2005) Dynamic neural network modeling for nonlinear, nonstationary machine tool thermally induced error. Int J Mach Tools Manuf 45:455–465
Jin ZF, Wang P (2012) Neural network–based thermal error modeling in ball screw. Modular Mach Tool Autom Manuf Tech 1:67–70
Yang JG, Yuan JX, Ni J (1999) Thermal error mode analysis and robust modeling for error compensation on a CNC turning center. Int J Mach Tools Manuf 39:1367–1381
Lin WQ, Fu JZ, Chen ZC, Xu YZ (2009) Modeling of NC machine tool thermal error based on adaptive best-fitting WLS-SVM. J Mech Eng 45(3):178–182
Zhang Y, Yang JG (2011) Modeling for machine tool thermal error based on Grey model preprocessing neural network. J Mech Eng 47(7):134–139
Li YQ, Yang JG (2006) Application of Grey system model to thermal error modeling on machine tools. China Mech Eng 17(23):2439–2442
Shu QL, Li YL, Lv YS (2012) Application of time series analysis to thermal error modeling OU NC micro-grinder. Modular Mach Tool Autom Manuf Tech 12:30–32
Li YX, Tong HC, Cao HT, Zhang HT, Yang JG (2006) Application of time series analysis to thermal error modeling on NC machine tool. J Sichuan Univ 38(2):74–78
Shrestha RR, Nestmann F (2014) Physically based and data-driven models and propagation of input uncertainties in river flood prediction. J Hydrol Eng 14(12):1309–1319
Chen C, Qiu ZR, Li XF, Dong CJ, Zhang CY (2011) Temperature field model of ball screws used in servo systems. Opt Precis Eng 19:1151–1158
Chen C (2010) Structure analysis and research on drive system thermal error model of θFXZ type CMMs. Dissertation, Tianjin University
Li X (2001) Real-time prediction of workpiece errors for a CNC turning center, part 2. Modeling and estimation of thermally induced errors. Int J Adv Manuf Technol 17(9):654–658
Du G, Chen J, Cao RJA (2010) Optimization design platform for wing turbine airfoil based on Isight. Acta Energiae Solaris Sinica 31(7):891–895
Xiang ST, Yang JG, Zhang Y (2014) Modeling method for spindle thermal error based on mechanism analysis and thermal basic characteristics tests. J Mech Eng 50:144–152
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Liu, K., Li, T., Wang, Y. et al. Physically based modeling method for comprehensive thermally induced errors of CNC machining centers. Int J Adv Manuf Technol 94, 463–474 (2018). https://doi.org/10.1007/s00170-017-0736-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-017-0736-9