Abstract
With the development of the supply chain network (SCN) and big data processing, a simple view at above two technologies separately has become unadvisable; this mainly reflected on the growing amount of data in the SCN nodes. Since the data processing is not timely, the potential risks may spread like dominoes to the entire network. There are many small nodes in the SCN, in which it requires data processing equipment that have characteristics of high integration and miniaturization. For the phenomenon that large shape and real-time shortage exists in designing underlying data processing equipment in SCN with the traditional special large computers and general embedded processor, this paper considering the advantage of parallel character of FPGA (field programmable gate array), a new method, which uses FPGA to design embedded device to execute related algorithms in parallel for underling data processing to reduce risks which caused by time-delay in SCN, is proposed. To verify effectiveness of the proposed method, a FPGA-based design method for Kalman filter algorithm and median filter algorithm is proposed. The performance and advantage of the proposed method are analyzed by comparing with traditional methods. The results shown that the proposed method have high real-time and accuracy in complex algorithm execution for SCN underling data processing, which can reduce the potential risk and improve the performance of entire SCN.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Li JR, Tao F, Cheng Y, Zhao LJ (2015) Big data in product lifecycle management. Int J Adv Manuf Technol. doi:10.1007/s00170-015-7151-x
Lu RX, Zhu H, Liu XM, Liu JK, Shao J (2014) Toward efficient and privacy-preserving computing in big data era. IEEE Netw 28(4):46–50
Gu L, Zeng DZ, Li P, Guo S (2014) Cost minimization for big data processing in geo-distributed data centers. IEEE Transactions on Emerging Topics in Computing 2(3):314–323
Xu L, Jiang CX, Wang J, Yuan J, Ren Y (2014) Information security in big data: privacy and data mining. IEEE Access 2:1149–1176
Slavakis K, Giannakis GB, Mateos G (2014) Modeling and optimization for big data analytics: (statistical) learning tools for our era of data deluge. IEEE Signal Process Mag 31(5):18–31
Liu Y, He J, Guo MJ, Yang Q, Zhang XS (2014) An overview of big data industry in China. China Communications 11(12):1–10
Lu TB, Guo XB, Xu B, Zhao LL, Peng Y, Yang HY (2013) Next Big Thing in Big Data: The Security of the ICT Supply Chain. International Conference on Date of Conference:1066–1073
Robak S, Franczyk B, Robak M (2013) Applying big data and linked data concepts in supply chains management. Federated Conference on Computer Science and Information Systems (FedCSIS):1215–1221
Zage D, Glass K, Colbaugh R (2013) Improving supply chain security using big data. IEEE International Conference on Intelligence and Security Informatics (ISI):254–259
Hu H, Wen YG, Chua TS, Li XL (2014) Toward scalable systems for big data analytics: a technology tutorial. IEEE Access 2:652–687
Tu YJ, Piramuthu S (2011) A decision-support model for filtering RFID read data in supply chains. IEEE Trans Syst Man Cybern Part C Appl Rev 41(2):268–273
Liu Y, Hipel KW (2012) A hierarchical decision model to select quality control strategies for a complex product. IEEE Trans Syst Man Cybern Syst Hum 42(4):814–826
Lau JSK, Huang GQ, Mak KL, Liang L (2006) Agent-based modeling of supply chains for distributed scheduling. IEEE Transactions on Systems, Man, and Cybernetics—Part A: Systems and Humans 36(5):847–861
Kelepouris T, Harrison M, McFarlane D (2011) Bayesian supply chain tracking using serial-level information. IEEE Trans Syst Man Cybern Part C Appl Rev 41(5):733–742
Zhao K, Kumar A, Harrison TP, Yen J (2011) Analyzing the resilience of complex supply network topologies against random and targeted disruptions. IEEE Syst J 5(1):28–39
Wang Y, Hu W (2011) The topology analysis on value creation of logistics financial management in supply chain system. International Conference on Business Management and Electronic Information (BMEI):243–248
Tao F, Zhao D, Hu YF, Zhou ZD (2008) Resource service composition and its optimal-selection based on particle swarm optimization in manufacturing grid system. IEEE Trans Ind Inf 4(4):315–327
Tao F, LaiLi YJ, Xu L, Zhang L (2013) FC-PACO-RM: a parallel method for service composition optimal-selection in cloud manufacturing system. IEEE Trans Ind Inf 9(4):2023–2033
Tao F, Zhang L, Laili YJ (2015) Configurable Intelligent Optimization Algorithms: Design and Practice in Manufacturing. Springer, ISBN: 978-3-319-08839-6
Tao F, Zhang L, Hu YF (2011) Resource Services Management in Manufacturing Grid System. Wiley-Scrivener Publishing (Scrivener-Wiley bookstore), ISBN: 978-1-118-12231-0
Tao F, Zuo Y, Xu L, Lv L, Zhang L (2014) Internet of things and BOM based life cycle assessment of energy-saving and emission-reduction of product. IEEE Trans Ind Inf 10(2):1252–1264
Tao F, Laili YJ, Liu YL, Feng Y, Wang Q, Zhang L, Xu L (2014) Concept, principle and application of configurable intelligent optimization algorithm. IEEE Syst J 8(1):28–42
Tao F, Zuo Y, Xu L, Zhang L (2014) IoT-based intelligent perception and access of manufacturing resource toward cloud manufacturing. IEEE Trans Ind Inf 10(2):1547–1557
Tao F, Cheng Y, Xu L, Zhang L, Li B (2014) CCIoT-CMfg: cloud computing and internet of things based cloud manufacturing service system. IEEE Trans Ind Inf 10(2):1435–1442
Tao F, Li C, Liao TW, Laili YJ (2015) BGM-BLA: a new algorithm for dynamic migration of virtual machines in cloud computing. IEEE Trans Serv Comput. doi:10.1109/TSC.2015.2416928
Tao F, Zhang L, Liu YK, Cheng Y, Wang LH, Xun X (2015) Manufacturing service management in cloud manufacturing: overview and future research directions. J Manuf Sci Eng 137(4):040912-1-040912-11
Tao F, Cheng Y, Zhang L, Nee AYC (2015) Advanced manufacturing systems: socialization characteristics and trends. J Intell Manuf. doi:10.1007/s10845-015-1042-8
Tao F, Zhang L, Lu K, Zhao D (2012) Research on manufacturing grid resource service optimal-selection and composition framework. Int J Enterp Inf Syst 6(2):237–264
Tao F, Zhang L, Venkatesh VC, Luo YL, Cheng Y (2011) Cloud manufacturing: a computing and service-oriented manufacturing model. Proc IMechE B J Eng Manuf 225(10):1969–1976
Jazemi R, Ghodsypour SH, Kheljani JG (2011) Considering supply chain benefit in supplier selection problem by using information sharing benefits. IEEE Trans Ind Inf 7(3):517–526
Agami N, Saleh M, Rasmy M (2014) An innovative fuzzy logic based approach for supply chain performance management. IEEE Syst J 8(2):336–342
Agami N, Saleh M, Rasmy M (2012) A hybrid dynamic framework for supply chain performance improvement. IEEE Syst J 6(3):469–478
Wu DD, Luo CC, Olson DL (2014) Efficiency evaluation for supply chains using maximin decision support. IEEE Trans Syst Man Cybern Syst Hum 44(8):1088–1097
Chan HK (2011) Supply chain systems—recent trend in research and applications. IEEE Syst J 5(1):2–5
Hill CA, Zhang GP, Scudder GD (2009) An empirical investigation of EDI usage and performance improvement in food supply chains. IEEE Trans Eng Manag 56(1):61–75
Cuiñas I, Newman R, Trebar M, Catarinucci L, Melcon AA (2014) Wireless corner: RFID-based traceability along the food-production chain. IEEE Antennas Propag Mag 56(2):196–207
Cunningham SP (2009) Special section on supply chain management in the semiconductor industry. IEEE Trans Semicond Manuf 22(1):153
Ulieru M, Cobzaru M (2005) Building holonic supply chain management systems: an e-logistics application for the telephone manufacturing industry. IEEE Trans Ind Inf 1(1):18–30
Wu XZ, Shao ZY, Zhang XM, Gao J, Jin GL (2010) The operation of supply-chain logistics in iron and steel enterprises. International Conference on Education Technology and Computer (ICETC): 103–106
Zhou CY, Fan HR, Jiang W (2011) An model for supply chain logistics cost management based on analytic hierarchy process. International Conference on Business Management and Electronic Information (BMEI):269–273
Kumar V, Mishra N (2011) A multi-agent self correcting architecture for distributed manufacturing supply chain. IEEE Syst J 5(1):6–15
Gaukler GM (2011) Item-level RFID in a retail supply chain with stock-out-based substitution. IEEE Trans Ind Inf 7(2):362–370
Ondemir O, Ilgin MA, Gupta SM (2012) Optimal end-of-life management in closed-loop supply chains using RFID and sensors. IEEE Trans Ind Inf 8(3):719–728
Chalasani S, Boppana RV (2007) Data architectures for RFID transactions. IEEE Trans Ind Inf 3(3):246–257
Lee CH, Chung CW (2011) RFID data processing in supply chain management using a path encoding scheme. IEEE Trans Knowl Data Eng 23(5):742–758
Piramuthu S (2008) Lightweight cryptographic authentication in passive RFID-tagged systems. IEEE Trans Syst Man Cybern Part C Appl Rev 38(3):360–376
Hsu C, Levermore DM, Carothers C, Babin G (2007) Enterprise collaboration: on-demand information exchange using enterprise databases, wireless sensor networks, and RFID systems. IEEE Transactions on Systems, Man, and Cybernetics—Part A: Systems and Humans 37(4):519–532
Olson DL (2012) Supply Chain Risk Management. Business Expert
Wang S, Watada J, Pedrycz W (2009) Value-at-risk-based two-stage fuzzy facility location problems. IEEE Trans Ind Inf 5(4):465–482
Shen B, Choi TM, Wang YL, Lo CKY (2013) The coordination of fashion supply chains with a risk-averse supplier under the markdown money policy. IEEE Transactions on Systems, Man, and Cybernetics: Systems 43(2):266–276
Zhang AN, Goh M, Terhorst M, Lee AJL, Pham MT (2013) An Interactive Decision Support Method for Measuring Risk in a Complex Supply Chain under Uncertainty. IEEE International Conference on Systems, Man, and Cybernetics:633–638
Groza B, Murvay S (2013) Efficient protocols for secure broadcast in controller area networks. IEEE Trans Ind Inf 9(4):2034–2042
Bernardi S, Campos J, Merseguer J (2011) Timing-failure risk assessment of UML design using time petri net bound techniques. IEEE Trans Ind Inf 7(1):90–104
Lao SI, Choy KL, Tsim YC, Poon TC (2010) A RFID-based decision support system for food receiving operations assignment. International Conference on Supply Chain Management and Information Systems (SCMIS):1–7
Wang Q, Gopalakrishnan S (2010) Adapting a main-stream internet switch architecture for multihop real-time industrial networks. IEEE Trans Ind Inf 6(3):393–404
LoBello L, Toscano E (2009) An adaptive approach to topology management in large and dense real-time wireless sensor networks. IEEE Trans Ind Inf 5(3):314–324
Neghab AP, Siadat A, Moghaddam RT, Jolai F (2011) An Integrated Approach for Risk-Assessment Analysis in a Manufacturing Process Using FMEA and DES. Proceedings of the 2011 I.E. ICQR:366–370
Lazzerini B, Mkrtchyan L (2011) Analyzing risk impact factors using extended fuzzy cognitive maps. IEEE Syst J 5(2):288–297
Mousavi OA, Cherkaoui R (2013) Discussion on Uncertainty Management in Power Systems. IREP Symposium-Bulk Power System Dynamics and Control –IX (IREP)
Kazmierkowski MP, Jasinski M, Wrona G (2011) DSP-based control of grid-connected power converters operating under grid distortions. IEEE Trans Ind Inf 7(2):204–211
Mastromauro RA, Liserre M, Aquila AD (2012) Control issues in single-stage photovoltaic systems: MPPT, current and voltage control. IEEE Trans Ind Inf 8(2):241–254
Nabulsi AA, Dhaouadi R (2012) Efficiency optimization of a DSP-based standalone PV system using fuzzy logic and dual-MPPT control. IEEE Trans Ind Inf 8(3):573–584
Gora MA, Maiti A, Schaumont P (2010) A flexible design flow for software IP binding in FPGA. IEEE Trans Ind Inf 6(4):719–728
Gomperts A, Ukil A, Zurfluh F (2011) Development and implementation of parameterized FPGA-based general purpose neural networks for online applications. IEEE Trans Ind Inf 7(1):78–89
Naouar MW, Monmasson E, Naassani AA, Belkhodja IS (2013) FPGA-based dynamic reconfiguration of sliding mode current controllers for synchronous machines. IEEE Trans Ind Inf 9(3):1262–1271
Campo I, Basterretxea K, Echanobe J, Bosque G, Doctor F (2012) A system-on-chip development of a neuro–fuzzy embedded agent for ambient-intelligence environments. IEEE Trans Syst Man Cybern B Cybern 42(2):501–512
Fu Y, Li H, Kaye ME (2010) Hardware/software codesign for a fuzzy autonomous road-following system. IEEE Trans Syst Man Cybern Part C Appl Rev 40(6):690–696
Xu TL, You WH, Cui PY (2005) INS/GPS integrated navigation system algorithm research based on fuzzy adaptive Kalman filtering. J Aerosp 5:571–575
Esakkirajan S, Veerakumar T, Subramanyam AN, PremChand CH (2011) Removal of high density salt and pepper noise through modified decision based unsymmetric trimmed median filter. IEEE Signal Process Lett 18(5):287–290
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Zou, X., Tao, F., Jiang, P. et al. A new approach for data processing in supply chain network based on FPGA. Int J Adv Manuf Technol 84, 249–260 (2016). https://doi.org/10.1007/s00170-015-7803-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-015-7803-x