Abstract
The paper deals with the impact of internal geometry and micro-geometry of functional surfaces of the cone roller bearing on internal resistance—friction of roller bearings. It describes an ideal point of contact at intersection of cone axes and raceway values, as well as the necessary values of micro-geometry, which enable the use of the bearings under the most demanding installations in the automotive industry—in differential gears, or for installation of pinions of differential gears and cog wheels in gearboxes. It describes optimisation (modification) of production of supporting face of the inner ring of the bearing, the purpose of which is to ensure this perfect point of contact, as well as required values of micro-geometry of functional surfaces.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Bhushan B (2000) Modern tribology handbook, two volume Set. CRC Press, Boca Raton
Della Corte C, Stanford MK, Jett TR (2015) Rolling contact fatigue of superelastic intermetallic materials (SIM) for Use as resilient corrosion resistant bearings. Tribol Lett 57:1–10. doi:10.1007/s11249-014-0456-3
Basera PK, Jain KV (2013) Reducing downtime of repairing for taper roller bearing by magnetic abrasive finishing (MAF) process. Diamond 4:130–136. doi:10.7763/IJIMT.2013.V4.375
Paulson NR, Evans NE, Bomidi JAR, Sadeghi F, Evans RD, Mistry KK (2015) A finite element model for rolling contact fatigue of refurbished bearings. Tribol Int 85:1–9. doi:10.1016/j.triboint.2014.12.006
Huang HH, BenWang HP (1996) An integrated monitoring and diagnostic system for roller bearings. Int J Adv Manuf Technol 12:37–46. doi:10.1007/BF01178960
Li CJ, Wu SM (1989) On-line detection of localized defects in bearings by pattern recognition analysis. J Eng Ind 111:331–336. doi:10.1115/1.3188768
Kurfess TR, Billington S, Liang SY (2006) Advanced diagnostic and prognostic techniques for rolling element bearings. In: Wang L, Gao XR (eds) Condition monitoring and control for intelligent manufacturing, 1st edn. Springer-Verlag, London, pp 137–165
Wei J, Zhang G (2010) A precision grinding method for screw rotors using CBN grinding wheel. Int J Adv Manuf Technol 48:495–503
J Šiška, J Hulka (1996) Assembly, disassembly and failures of roller bearings, Management Art-Vladimír Petrák, Žilina
ZVL AUTO spol. s r.o. Prešov: Internal documentation
Wang P, Wong PL, Zhang Z (1996) Partial EHL analysis of rib-roller end contact in tapered roller bearings. Tribol Int 29:313–321. doi:10.1016/0301-679X(95)00059-D
Hoeprich MR (1992) Rolling element bearing fatigue damage propagation. J Tribol 114:328–333. doi:10.1115/1.2920891
Kotzalas MN, Harris TA (2000) Fatigue failure and ball bearing friction. Tribol Trans 43:137–143. doi:10.1080/10402000008982323
Grohmann O, Rentsch R, Heinzel C, Brinksmeier E (2012) Numerical distortion simulation of roller bearing rings. Mater Werks 43:158–162. doi:10.1002/mawe.201100904
Ioannides E, Harris TA (1985) A new fatigue life model for rolling bearings. J Tribol 107:377–378. doi:10.1115/1.3261082
Panda A, Duplák J, Jurko J, Behún M (2011) Comprehensive identification of sintered carbide durability in machining process of bearings steel 100CrMn6. Adv Mater Res 340:30
Panda A, Duplák J, Jurko J, Zajac J (2013) Turning bearing rings and determination of selected cutting materials durability. Adv Sci Lett 19:2486
Panda A, Duplák J, Jurko J, Behun M (2013) New experimental expression of durability dependence for ceramic cutting tool. Appl Mech Mater 275–277:2230
Panda A, Jurko J, Gajdoš M (2009) Accompanying phenomena in the cutting zone machinability during turning of stainless steels. Int J Mach Mach Mater 5:383
Panda A, Blecharz P, Pandová I (2013) Production of vehicles from development to the serial production, Technická univerzita v Košiciach, Fakulta výrobných technológií so sídlom v Prešove, Košice
Perez M, Sidoroff CH, Vincent A, Esnouf C (2009) Acta Mater 57:3170
Panda A, Jurko J, Džupon M, Pandová I (2011) Optimalization of heat treatment bearings rings with goal to eliminate deformation of material. Chem Sheets 105:459
Chen ZZ, Xu JH, Ding WF, Ma CY, Fu YC (2015) Grinding temperature during high-efficiency grinding Inconel 718 using porous CBN wheel with multilayer defined grain distribution. Int J Adv Manuf Technol 77:165–172
Ding K, Fu Y, Su H, Gong Y, Wu K (2014) Wear of diamond grinding wheel in ultrasonic vibration-assisted grinding of silicon carbide. Int J Adv Manuf Technol 71:1929–1938
Wang JM, Ye RZ, Tang YP, Bin HZ, Li ZB (2010) Research on the technology for outer race elliptical groove grinding with basin-like grinding wheel. Int J Adv Manuf Technol 49:497–504
Niźankowski C (2010) Influence of the abradant’s composition on the selected physical properties in the process of front grinding of surfaces with microcrystalline sintered corundum grinding wheels. Int J Adv Manuf Technol 69:499–507
Denkena B, Grove T, Gottsching T, de Silva EJ, Coelho RT, Filleti R (2015) Enhanced grinding performance by means of patterned grinding wheels. Int J Adv Manuf Technol 77:1935–1941
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Jurko, J., Panda, A., Valíček, J. et al. Study on cone roller bearing surface roughness improvement and the effect of surface roughness on tapered roller bearing service life. Int J Adv Manuf Technol 82, 1099–1106 (2016). https://doi.org/10.1007/s00170-015-7449-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-015-7449-8