Abstract
The multi-pass turning process is one of the most used machining methods in manufacturing industry. The minimization of the unit production cost is considered the key objective of this operation. In this work, the cutting parameters are carried out using a recently developed advanced bio-inspired optimization algorithm, called the cuckoo optimization algorithm (COA). The obtained results are compared with previously published results available in the literature. It has been proven that the COA competes robustly with a wide range of optimization algorithms.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Zadshakoyan M, Pourmostaghimi V (2013) Genetic equation for the prediction of tool-chip contact length in orthogonal cutting. Eng Appl Artif Intell 26(7):1725–1730
Rao RD, Kalyankar VD (2013) Parameter optimization of modern machining processes using teaching-learning-based optimization algorithm. Eng Appl Artif Intell 26(1):524–531
Venkata Rao R, Kalyankar VD (2013) Multi-pass turning process parameter optimization using teaching-learning-based optimization algorithm. Scientia Iranica 20(3):967–974
Shin YC, Joo YS (1992) Optimization of machining conditions with practical constraints. Int J Prod Res 30(12):2907–2919
Chen MC, Tsai DM (1996) A simulated annealing approach for optimization of multi-pass turning operations. Int J Prod Res 34(10):2803–2825
Onwubolu GC, Kumalo T (2001) Optimization of multi-pass turning operations with genetic algorithms. Int J Prod Res 39(16):3727–3745
Srinivas J, Giri R, Yang SH (2009) Optimization of multi-pass turning using particle swarm intelligence. Int J Adv Manuf Technol 40(1–2):56–66
Yildiz AR (2013) Optimization of cutting parameters in multi-pass turning using artificial bee colony-based approach. Inf Sci 220:399–407
Costa A, Celano G, Fichera S (2011) Optimization of multi-pass turning economies through a hybrid particle swarm optimization technique. Int J Adv Manuf Technol 53(5–8):421–433
Crookall JR, Venkataramani N (1971) Computer optimization of multi-pass turning. Int J Prod Res 9(2):247–259
Iwata K, Iwatsubo T, Fujii S, Iwatsubo Y (1972) A probabilistic approach to the determination of the optimum cutting conditions. J Eng Ind 94(4):1099–1107
Ermer DS, Kromodihardjo S. Optimization of multipass turning with constraints. Journal of Engineering for Industry Transactions of the ASME 1981;103(4):462–468
Alberti N. Optimization of multi-pass turning, in: Proceedings of the 14th North American Manufacturing Research Conference, USA, 1986
Gopalakrishnan B, Al-Khayyal F (1991) Machine parameter selection for turning with constraints: an analytical approach based on geometric programming. Int J Prod Res 29(9):1897–1908
Chen MC, Su ST (1998) Optimization of machining conditions for turning cylindrical stocks into continuous finished profiles. Int J Prod Res 36(8):2115–2130
Gupta R, Batra JL, Lal GK (1995) Determination of optimal subdivision of depth of cut in multi-pass turning with constraints. Int J Prod Res 33(9):2555–2565
Chen MC, Chen KY (2003) Optimization of multi-pass turning operations with genetic algorithms: a note. Int J Prod Res 41(14):3385–3388
Aryanfar A, Solimanpur M (2012) Optimization of multi-pass turning operations using genetic algorithms, in: Proceedings of the 2012 International Conference on Industrial Engineering and Operations Management. Istanbul, Turkey
Vijayakumar K, Prabhaharan G, Asokan P, Saravanan R (2003) Optimization of multi-pass turning operations using ant colony system. Int J Mach Tools Manuf 43(15):1633–1639
Wang YC (2007) A note on ‘optimization of multi-pass turning operations using ant colony system’. Int J Mach Tools Manuf 47(12–13):2057–2059
Zheng LY, Ponnambalam SG (2010) A hybrid GA-AIS heuristic for optimization of multi-pass turning operations. In: Intelligent robotics and applications. Springer Berlin Heidelberg, Germany, pp 599–611
Saravanan R, Siva Sankar R, Asokan P, Vijayakumar K, Prabhaharan G (2005) Optimization of cutting conditions during continuous finished profile machining using non-traditional techniques. Int J Adv Manuf Technol 26(1–2):30–40
Yildiz AR (2012) A comparative study of population-based optimization algorithms for turning operations. Inf Sci 210:81–88
Yildiz AR (2013) Hybrid Taguchi differential evolution algorithm for optimization of multi-pass turning operations. Appl Soft Comput 13(3):1433–1439
Yildiz AR (2013) Optimization of multi-pass turning operations using hybrid teaching learning based approach. Int J Adv Manuf Technol 66(9–12):1319–1326
Belloufi A, Assas M, Rezgui I. Intelligent selection of machining parameters in multi-pass turnings using firefly algorithm. Modeling and Simulation in Engineering 2013; In Press
Belloufi A, Assas M, Rezgui I (2012) Optimization of cutting conditions in multi-pass turning using hybrid genetic algorithm-sequential quadratic programming. J Appl Mech Eng 1(1):3–7
Rajabioun R (2011) Cuckoo optimization algorithm. Appl Soft Comput 11(8):5508–5518
Mellal MA, Adjerid S, Williams EJ (2013) Optimal selection of obsolete tools in manufacturing systems using cuckoo optimization algorithm. Chem Eng Trans 33:355–360
Mellal MA, Adjerid S, Williams EJ, Benazzouz D (2012) Optimal replacement policy for obsolete components using cuckoo optimization algorithm based approach: Dependability context. J Sci Ind Res 71(11):715–721
Rabiee M, Sajedi H (2013) Job scheduling in grid computing with cuckoo optimization algorithm. Int J Comput Appl 62(16):38–44
Addeh J, Ebrahimzadeh A, Azarbad M, Ranaee V. Statistical process control using optimized neural networks: A case study. ISA Transactions 2013;DOI: 10.1016/j.isatra.2013.07.018
Sahab AR, Ziabari MT, Modabbernia MR (2012) A novel fractional-order hyperchaotic system with a quadratic exponential nonlinear term and its synchronization. Adv Differ Equ 2012:1–21
Teimouri R, Sohrabpoor H (2013) Application of adaptive neuro-fuzzy inference system and cuckoo optimization algorithm for analyzing electro chemical machining process. Front Mech Eng 8(4):429–442
Mellal MA, Williams EJ. Parameter optimization of advanced machining processes using cuckoo optimization algorithm and hoopoe heuristic. Journal of Intelligent Manufacturing 2014;DOI: 10.1007/s10845-014-0925-4
Roozitalab A, Asgharizadeh E (2013) Optimizing the warranty period by cuckoo meta−heuristic algorithm in heterogeneous customers’ population. J Ind Eng Int 9(27):1–6
Author information
Authors and Affiliations
Corresponding author
Additional information
An erratum to this article is available at http://dx.doi.org/10.1007/s00170-017-0314-1.
Rights and permissions
About this article
Cite this article
Mellal, M.A., Williams, E.J. Cuckoo optimization algorithm for unit production cost in multi-pass turning operations. Int J Adv Manuf Technol 76, 647–656 (2015). https://doi.org/10.1007/s00170-014-6309-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-014-6309-2