Abstract
Microscopic vision system has been employed to measure the surface roughness of micro-heterogeneous texture in deep hole, by virtue of frequency domain features of microscopic image and back-propagation artificial neural network optimized by genetic algorithm. However, the measurement accuracy needs to be improved for engineering application. In this paper, we propose an improved method based on microscopic vision to detect the surface roughness of R-surface in the valve. Firstly, the measurement system for the roughness of R-surface in deep hole is described. Thereafter, the surface topography images of R-surface are analyzed by the gray-level co-occurrence matrix (GLCM) method, and several features of microscopic image, which are nearly monotonic with the surface roughness, are extracted to fabricate the prediction model of the roughness of R-surface accurately. Moreover, a support vector machine (SVM) model is presented to describe the relationship of GLCM features and the actual surface roughness. Finally, experiments on measuring the surface roughness are conducted, and the experimental results indicate that the GLCM-SVM model exhibits higher accuracy and generalization ability for evaluating the microcosmic surface roughness of micro-heterogeneous texture in deep hole.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Ghassan A, Kindi AL, Shirinzadeh B (2007) An evaluation of surface roughness parameters measurement using vision-based data. Int J Mach Tools Manufac 47:697–708
Shahabi HH, Ratnam MM (2010) Noncontact roughness measurement of turned parts using machine vision. Int J Adv Manuf Technol 46:275–284
Zhang JG, Tan TN (2002) Brief review of invariant texture analysis methods. Pattern Recognit 35:735–747
Tsai DM, Chen JJ, Chen JF (1998) A vision system for surface roughness assessment using neural networks. Int J Adv Manuf Technol 14:412–422
Lee KC, Ho SJ, Ho SY (2005) Accurate estimation of surface roughness from texture features of the surface image using an adaptive neuron-fuzzy inference system. Precis Eng 29:95–100
Hu ZX, Zhu L, Teng JX, Ma XH, Shi XJ (2009) Evaluation of three-dimensional surface roughness parameters based on digital image processing. Int J Adv Manuf Technol 40:342–348
Liu W, Zheng XY, Liu SJ, Jia ZY (2012) A roughness measurement method based on Genetic algorithm and neural network for microheterogeneous surface in deep-hole parts. J Circuit Syst Comput 21:125005–1250018
Dutta S, Datta A, Das Chakladar N, Pal SK, Mukhopadhyay S, Sen R (2012) Detection of tool condition from the turned surface images using an accurate grey level co-occurrence technique. Precis Eng 36:458–466
Alegre E, Barreiro J, Alexci SC (2012) A new improved Laws-based descriptor for surface roughness evaluation. Int J Adv Manuf Technol 59:605–615
Gadelmawla ES (2004) A vision system for surface roughness characterization using the gray level co-occurrence matrix. NDT&E Int 37:577–588
Xian GM (2010) An identification method of malignant and benign liver tumors from ultrasonography based on GLCM texture features and fuzzy SVM. Exp Syst Appl 37:6737–6741
Yang SH, Natarajan U, Sekar M, Palani S (2010) Prediction of surface roughness in turning operations by computer vision using neural network trained by differential evolution algorithm. Int J Adv Manuf Technol 51:965–971
Wang PD, Meng QF, Zhao J, Li JJ, Wang XF (2011) Prediction of machine tool condition using support vector machine. 9th international conference on damage assessment of structures (DAMAS). J Phys Conf Ser 305:0121
Cao ZK, Han H, Gu B, Ren N (2009) A novel prediction model of frost growth on cold surface based on support vector machine. Appl Therm Eng 29:2320–2326
Zhang D, Sui WT (2011) The application of AR model and SVM in rolling bearings condition monitoring. Adv Res Comput Sci Inform Sci 152:326–331
Huang JD, Wang LS, Li GF, Zhang XZ, Wang JZ (2010) Prediction system of surface roughness based on LS-SVM in cylindrical longitudinal grinding. Optics Precis Eng 18(11):2407– 2412
Lela B, Bajić D, Jozić S (2009) Regression analysis, support vector machines, and Bayesian neural network approaches to modeling surface roughness in face milling. Int J Adv Manuf Technol 42:1082–1088
Ekici S, Çaydas U (2010) Support vector machines models for surface roughness prediction in CNC turning of AISI 304 austenitic stainless steel. J Intell Manuf 23:639–650
Vapnik VN (1998) Statistical learning theory. Wiley, New York
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Liu, W., Tu, X., Jia, Z. et al. An improved surface roughness measurement method for micro-heterogeneous texture in deep hole based on gray-level co-occurrence matrix and support vector machine. Int J Adv Manuf Technol 69, 583–593 (2013). https://doi.org/10.1007/s00170-013-5048-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-013-5048-0