Abstract
With the ever-decreasing size of manufactured objects, fabrication processes driven by charged particle beams, such as focused ion beam (FIB), become important for a wide spectrum of interdisciplinary applications. A designed three-dimensional (3-D) pattern to fabricate may contain millions of pixels, which will require solving an unprecedented large-scale problem for planning. This paper proposes a general framework of planning FIB milling for fabricating 3-D nanostructures, including model formulations to enable FIB for scalable and automated applications and a corresponding optimization model to support the process planning. The implementation of proposed work does not affect the fabrication quality and yet tremendously reduces the required computational time and data storage during planning. The proposed framework of process planning is further illustrated and verified by simulation and milling experiments of submicron features on Si and Si3N4. This research offers an accurate and economical solution to the realization from designs to actual micro/nanoscale models and builds a scientific foundation for immediate development of complex, yet more accurate and cost-effective, beam scanning techniques.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Reynjens S, Puers R (1999) A review of focused ion beam applications in microsystem technology. J Micromechanics Microengineering 11(4):287–300
Vasile MJ, Nassar R, Xie J, Guo H (1999) Microfabrication techniques using ion beams and emergent applications. Micron 30(3):235–244
Tseng AA (2004) Recent developments in micromilling using focused ion beam technology. J Micromechanics Microengineering 14(4):15–34
Tseng AA (2005) Recent developments in nanofabrication using focused ion beams. Small 1(10):924–939
Yao N, Wang Z (2005) Handbook of microscopy for nanotechnology. Kluwer Academic Pub., Norwell, MA
D’Souza RM, Sequin C, Wright PK (2004) Automated tool sequence selection for 3-axis machining of free-form pockets. J Comput Aided Des 36(7):595–605
Chen YH, Lee YS, Fang SC (1998) Optimal cutter selection and machining plane determination for process planning and NC machining of complex surfaces. J Manuf Syst 17(5):371–388
Xu XW, He Q (2004) Striving for a total integration of CAD, CAPP, CAM and CNC. Robot Comput-integr Manuf 20(2):101–109
Volkert CA, Minor AM (2007) Focused ion beam microscopy and micromachining. MRS Bull 32:389–395
Yong R (1993) Micro-machining using a focused ion beam. Vacuum 44(3–4):353–356
Vesile MJ, Niu Z, Nassar R, Zhang W, Liu S (1997) Focused iron beam milling: depth control for three dimensional microfabrication. J Vac Sci Technol B, Microelectron Nanometer Struct 15(6):2350–2354
Vasil MJ, Nassar R, Xie J (1999) Focused ion beam technology applied to microstructure fabrication. J Vac Sci Technol B, Microelectron Nanometer Struct 16(4):2499–2506
Fu Y, Bryan NKA, Shing ON, Hung NP (2000) Influence of the redeposition effect for focused iron beam 3D micromachining in silicon. Int J Adv Manuf Technol 16(12):877–880
Fu Y, Bryan NKA (2002) Semiconductor microlenses Fabricated by one-step-focused iron beam direct writing. IEEE Trans Semicond Manuf 15(2):229–231
Nassar R, Vasile MJ, Zhang W (1998) Mathematical modeling of focused ion beam microfabrication. J Vac Sci Technol B, Microelectron Nanometer Struct 16(1):109–115
Vasile MJ, Xie J, Nassar R (1999) Depth control of focused ion-beam milling from a numerical model of the sputter process. J Vac Sci Technol B, Microelectron Nanometer Struct 17(6):3085–3090
Fu Y, Bryan NKA, Shing ON, Wyan HNP (2000) Influence analysis of dwell time on focused ion beam micromachining in silicon. Sens Actuators 79(3):230–234
Adams DP, Vasile MJ (2006) Accurate focused ion beam sculpting of silicon using a variable pixel dwell time approach. J Vac Sci Technol B, Microelectron Nanometer Struct 24(2):836–844
Fu Y, Bryan NKA (2004) Fabrication of three-dimensional microstructures by two-dimensional slice by slice approaching via focused ion beam milling. J Vac Sci Technol, B, Microelectron Nanometer Struct 22(4):1672–1678
Hopman WCL, Ay F, Hu W, Gadgil VJ, Kuipers L, Pollnau M, de Ridder RM (2007) Focused ion beam scan routine, dwell time and dose optimizations for submicrometre period planar photonic crystal components and stamps in silicon. Nanotechnology 18(19):1–11
Tropp JA (2006) Just relax: convex programming methods for indentifying sparse signals in noise. IEEE Trans Inf Theory 52(3):1030–1051
Lee D, Seung S (2001) Algorithms for non-negative matrix factorization. Adv Neural Inf Process Syst 13:556–562
Sha F, Lin Y, Saul LK, Lee D (2007) Multiplicative updates for nonnegative quadratic programming. Neural Comput 19(8):2004–2031
Boyd S, Vandenberghe L (2004) Convex optimization. Cambridge University Press, New York, NY
Quanta (2009) 3D FEG 200/600 user operation manual, 7th edn. FEI Company, USA
http://www.srim.org/SRIM/SRIMLEGL.htm. Accessed 30 Sep 2011
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Qin, R., Fu, J., Yin, Z. et al. Large-scale process optimization for focused ion beam 3-D nanofabrication. Int J Adv Manuf Technol 64, 587–600 (2013). https://doi.org/10.1007/s00170-012-4429-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-012-4429-0