Abstract
In injection moulding process, cooling time greatly affects the total cycle time. As thermal conductivity is one of the main factors for conductive heat transfer in cooling phase of IMP, a cooling channel made by higher thermal conductive material will allow faster extraction of heat from the molten plastic materials, thus resulting in shorter cycle time and higher productivity. The main objective of this paper is to investigate bi-metallic conformal cooling channel design with high thermal conductive copper tube insert for injection moulds. Thermal–structural finite element analysis has been carried out with ANSYS workbench simulation software for a mould with bi-metallic conformal cooling channels and the performance is compared with a mould with conventional straight cooling channels for an industrial plastic part. Experimental verification has been carried out for the two moulds using two different types of plastics, polypropylene (PP) and acrylonitrile butadiene styrene, in a mini injection moulding machine. Simulation and experimental results show that bi-metallic conformal cooling channel design gives better cycle time, which ultimately increases production rate as well as fatigue life of the mould.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Rees H (2002) Mold engineering, 2nd edn. Hanser Publishers, Munich
Menges G, Michaeli W, Mohren P (2000) How to make injection mould, 3rd edn. Hanser Publishers, Munich
Rosato DV, Rosato MG (2003) Injection moulding handbook, 3rd edn. Kluwer Academic Publishers, Boston
Kamal MR, Isayev AI, Liu SJ (2009) Injection molding technology and fundamentals, 1st edn. Hanser, Munich
Dimla DE, Camilotto M, Miani F (2005) Design and optimisation of conformal cooling channels in injection moulding tools. J Mater Process Technol 164–165:1294–1300
Au KM, Yu KM (2007) A scaffolding architecture for conformal cooling design in rapid plastic injection moulding. Int J Adv Manuf Technol 34(5–6):496–515
Sun YF, Lee KS, Nee AYC (2004) Design and FEM analysis of the milled groove insert method for cooling of plastic injection moulds. Int J Adv Manuf Technol 24(9–10):715–726
Au KM, Yu KM (2006) Variable radius conformal cooling channel for rapid tool. Mater Sci Forum 532–533:520–523
Saifullah ABM, Masood SH, Sbarski I (2010) Thermal-structural finite element analysis of injection moulding dies with optimized cooling channels. Mater Sci Forum 654–656:1646–1649
Jacobs PF (2000) New frontiers in mold construction: high conductivity materials and conformal cooling channels. Am Soc of Mech Eng Manuf Eng Div MED 11:389–396
Xu X, Sachs E, Allen S (2001) The design of conformal cooling channels in injection molding tooling. Polym Eng and Sci 41(7):1265–1279
Cha BS, Park HP, Rhee BO (2007) Manufacturing of plastic lens mold conformal cooling channel using direct metal laser sintering and spray-formed tooling process. In: Cincinnati, OH, 2007. Society of Plastics Engineers Annual Technical Conference: Plastics Encounter at ANTEC 2007. pp 666–670.
Kelly AL, Mulvaney-Johnson L, Beechey R, Coates PD (2011) The effect of copper alloy mold tooling on the performance of the injection molding process. Polym Eng and Sci 51(9):1837–1847
Beal VE, Erasenthiran P, Ahrens CH, Dickens P (2007) Evaluating the use of functionally graded materials inserts produced by selective laser melting on the injection moulding of plastic parts. Proc IME B J Eng Manufact 221:845–854
Holman JP (1997) Heat transfer, 8th edn. McGraw-Hill, New York
Jeppson RW (1976) Analysis of flow in pipe networks. Butterworth Publications, UK
Shigly JE, Mischke CR, Budynas RG (2004) Mechanical engineering design, 7th edn. McGraw-Hill, New York
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Saifullah, A.B.M., Masood, S.H. & Sbarski, I. Thermal–structural analysis of bi-metallic conformal cooling for injection moulds. Int J Adv Manuf Technol 62, 123–133 (2012). https://doi.org/10.1007/s00170-011-3805-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-011-3805-5