Abstract
Often in the engineering practice, cutting tools bounded by primary peripheral surfaces of revolution are used because of their effectiveness. Among these, ring and tangential tools can be used for the generation of constant pitch cylindrical helical surfaces. In this paper, we present an algorithm for the profiling of these types of tools. The algorithm is based on the topological representation of the tool’s primary peripheral surface. The main goal is to devise a methodology for the profiling of tools whose surfaces are reciprocally enveloping with cylindrical helical surfaces. We present a numerical example for the numerical determination of the axial section form for this type of tools. The application method for this algorithm was developed in the CATIA graphical design environment within which the procedure is developed as a vertical application. In addition, we present a solution for the shape correction of the tool’s axial cross-section by considering the existence of singular points on the profile of the helical surface to be generated where multiple normals to the surface exist.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Oancea N (2004) Surface generation through winding. Volume 2. complementary theorems. “Dunărea de Jos” University Publishing House, Galaţi, ISBN 973-627-106-4, ISBN 973-627-170-6
Veliko I, Gentcho N (1998) Profiling of rotation tools for forming of helical surfaces. Int J Mach Tool Manuf 38:1125–1148
Rodin RP (1990) Osnovy proektirovania rezhushchikh instrumentov (Basics of design of Cutting Tools). Vishcha Shkola, Kiev
Shalamanov VG, Smetanin SD (2007) Shaping of helical surfaces by profiling circles, Russian engineering research, vol. 27, No. 7, pp. 470-473, ISSN 1068-798X
Litvin FL (1984) Theory of gearing. NASA Scientific and Technical Information Division, Washington, reference publications 1212
Teodor V (2011) Contributions to the elaboration of a method for profiling tools—tools which generate by enwrapping. Lambert, Saarbrucken, ISBN 978-3-8433-8261-8
Berbinschi S, Teodor V, Oancea N (2010) Contributions to the elaboration of a graphical method for profiling of tools which generate by enveloping. I. Algorithms, Buletinul Institutului Politehnic din Iaşi, tomul LVI (LX), fasc. 2, secţia Construcţii de Maşini, ISSN 1011-2855, pp. 41-48
Berbinschi S, Teodor V, Oancea N (2010) Contributions to the elaboration of a graphical method for profiling of tools which generate by enveloping. II. Applications for rack-gear profiling, Buletinul Institutului Politehnic din Iaşi, tomul LVI (LX), fasc. 2, secţia Construcţii de Maşini, ISSN 1011-2855, pp. 49-56
Berbinschi S, Teodor V, Oancea N (2010) Kinematical method for rack-gear tool’s profiling in CATIA design environment. Proceedings of the 14 International Conference ModTech, ISSN 2066-3513, pp. 119-122
Berbinschi S, Teodor V, Oancea N (2010) Comparisons between CAD method and analytical method—rack-gear tool’s profiling. The annals of the “Dunărea de Jos” University of Galaţi, fasc. V, Technologies in machine building, ISSN 1221-4566, pp. 57-64
Baicu I, Oancea N (2002) Profilarea sculelor prin modelare solidă, Editura Tehnica-Info, Chişinău, ISBN 9975-63-172-X
Ivanov V, Nankov G, Kirov V (1998) CAD orientated mathematical model for determination of profile helical surfaces. Int J Mach Tool Manuf 38(8):1001–1015
Acknowledgments
The authors gratefully acknowledge the financial support of the Romanian Ministry of Education, Research and Innovation through grant PN_II_ID_791/2008.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Berbinschi, S., Teodor, V. & Oancea, N. A study on helical surface generated by the primary peripheral surfaces of ring tool. Int J Adv Manuf Technol 61, 15–24 (2012). https://doi.org/10.1007/s00170-011-3687-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-011-3687-6