Abstract
We analyse some acoustic emission time series obtained from a lathe machining process. Considering the dynamic evolution of the process, we apply two classes of well known stationary stochastic time series models. We apply a preliminary root mean square (RMS) transformation followed by an auto regressive moving average analysis; results thereof are mainly related to the description of the continuous part (plastic deformation) of the signal. An analysis of acoustic emission, as some previous works show, may also be performed with the scope of understanding the evolution of the ageing process that causes the degradation of the working tools. Once the importance of the discrete part of the acoustic emission signals (i.e. isolated amplitude bursts) in the ageing process is understood, we apply a stochastic analysis based on point processes’ waiting times between bursts and to identify a parameter with which to characterise the wear level of the working tool. A Weibull distribution seems to adequately describe the waiting times distribution.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Ahn T, Eman K, Wu S (1985) Cutting dynamics identification by dynamic data system (dds) modeling approach. J Eng Ind 107(2):91–94
Akay M, Welkowitz W, Semmlow J, Kostis J (1991) Application of the ARMA method to acoustic detection of coronary artery disease. Med Biol Eng Comput 29(4):365–372
Battaglia F (2007) Metodi di previsione statistica. Springer, Milano
Box GEP, Jenkins GM, Reinsel GC (2004) Time series analysis forecasting and control. Pearson Education, Dehli
Brockwell PJ, Davis RA (1991) Time series: theory and methods. Springer, New York
Chang MK, Kwiatkowski JW, Nau RF, Oliver RM, Pister KS (2006) ARMA models for earthquake ground motions. Earthq Eng Struct Dyn 10(5):651–662
Cohen A, Berstein A (1991) Acoustic transmission of the respiratory system using speech stimulation. IEEE Trans Biomed Eng 38(2):126–132
Cox DR (1962) Renewal theory. Methuen, London
Cox DR, Miller HD (1965) The theory of stochastic processes. Methuen
Esquef PAA, Karjalainen M, Välimäki V (2003) Frequency-zooming ARMA modeling for analysis of noisy string instrument tones. EURASIP J Appl Signal Process 10:953–967
Farrelly FA, Petri A, Pitolli L, Pontuale G, Tagliani A, Novi Inverardi PL (2004) Statistical properties of acoustical emission signals from metal cutting processes. J Acoust Soc Am 116(2):981–986
Fassois S, Eman K, Wu S (1989) Suboptimum maximum likelihood approach to parametric signal analysis. J Dyn Syst Meas Control, Trans Am Soc Mech Eng 111(2):153–159
Ghahramani M, Thavaneswaran A (2006) Financial applications of ARMA models with GARCH errors. The Journal of Risk Finance Incorporating Balance Sheet 7(19):525–543
Greene W (2003) Econometric analysis, 4th edn. Prentice Hall, Englewood Cliffs
Ho SL, Xie M (1998) The use of ARIMA models for reliability forecasting and analysis. Comput Ind Eng 35(1–2):213–216 (Proceedings of the 23rd international conference on computers and industrial engineering)
Hu S, Wu SM (1989) Prony estimation of AR parameters of an ARMA time series. Mech Syst Signal Process 3:207–211
Kannatey-Asibu E, Dornfeld DA (1982) Study of tool wear using statistical analysis of metal cutting acoustic emission. Wear 76:247–261
Karjalainen M, Esquef PA, Antsalo MA, Valimaki V (2002) Frequency-zooming ARMA modeling of resonant and reverberant systems. J Audio Eng Soc 50(12):1012–1029
Kim T, Wu S, Eman K (1989) Identification of joint parameters for a taper joint. J Eng Ind 111(3):282–287
Li Y, Kareem A (1990) ARMA systems in wind engineering. Probab Eng Mech 5(2):50–59
Lowen SB, Teich MC (1993) Fractal renewal processes. IEEE Trans Inf Theory 39:1669–1671
Lowen SB, Teich MC (2005) Fractal-based point processes. Wiley-Interscience, New York
Malevergne Y, Pisarenko VF, Sornette D (2005) Empirical distributions of log-returns: between the stretched exponential and the power law? Quantitative Finance 5:379
Na S-S, Rhee H-K (2002) An experimental study for property control in a continuous styrene polymerization reactor using a polynomial ARMA model. Chem Eng Sci 57(7):1165–1173
Olafsson S, Sigbjornsson R (2006) Application of arma models to estimate earthquake ground motion and structural response. Earthq Eng Struct Dyn 24(7):951–966
Pawlowski A (1997) Time-Series analysis in linguistics: Application of the ARIMA method to cases of spoken Polish. J Quant Linguist 4(1):203–221
Petri A, Paparo G, Vespignani A, Alippi A, Costantini M (1994) Experimental evidence for critical dynamics in microfracturing processes. Phys Rev Lett 73(25):3423–3426
Pontuale G, Farrelly F, Petri A, Pitolli L (2003) A statistical analysis of acoustic emission signals for tool condition monitoring (tcm). Acoust Res Lett Online 4:13–18
Pontuale G, Farrelly F, Petri A, Pitolli L, Krogh F (2001) Properties of acoustic emission signals for tool condition monitoring (tcm) applications. In: Proceedings of 17th international congress on acoustics. Rome
Priestley MB (1981) Spectral analysis and time series. Academic, London
R Development Core Team (2008) R: a language and environment for statistical computing. R Foundation for Statistical Computing, Vienna, Austria. ISBN 3-900051-07-0
Shumway RH, Stoffer DS (2006) Time series analysis and its applications: with R examples, 2nd edn. Springer, New York
Thurner S, Lowen SB, Feurstein MC, Heneghan C, Feichtinger HG, Teich MC (1997) Analysis, synthesis, and estimation of fractal-rate stochastic point processes. Fractals 5:565–596
Wang C-W, Wu C-W (2008) Valuing American Options under ARMA Processes. In: Proceedings of the 2008 3rd international conference on innovative computing information and control, p 313
Yang X, Eman K, Wu S (1985) Analysis of three-dimensional cutting process dynamics. J Eng Ind 107(4):336–342
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Polito, F., Petri, A., Pontuale, G. et al. Analysis of metal cutting acoustic emissions by time series models. Int J Adv Manuf Technol 48, 897–903 (2010). https://doi.org/10.1007/s00170-009-2357-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-009-2357-4