Abstract
Forming tools manufacturers have extensively incorporated high-speed milling technology for the finishing of large punch or die tools. The main objective is to achieve a good surface quality directly form machining, without any additional, tedious, manual work. Currently, new advanced high-strength steels (AHSS) are being used for car body parts. In this case, there are two special changes related to the forming tools: a higher proportion of harder surfaces on the working area, and long try-out iterations, due to their great springback. Tempered surfaces and insert blocks harder than 60 HRC are needed to withstand the forming charges with a good working life expectancy. From this, two problems arise with regards to high-speed finishing: first, the deflection of the tool due to the cutting forces, which can produce unacceptable dimensional errors; and second, in the same finishing operation, zones with sharp changes in hardness must be machined with the same CNC program and cutting tool.
The key to solving both problems will be the use of newly developed utilities in the preparation stage, and the elaboration of CNC programs using CAM software. In the first case, the deflection of tool is dealt with by a milling model which obtains the values of cutting forces. This model characterises the couple tool/material with six coefficients, which are previously obtained for ball-end milling tools and base die materials. Inputs provided by the CAM user include feed per tooth, and radial and axial depths of cut. The problem of surfaces with areas of different hardness and poorly defined boundaries is solved with a special postprocessor coded in C language. Once the CAM user has defined (on the CAD model) the theoretical boundaries of the tempered areas, the insert blocks or the deposition material areas, this utility includes changes of the programmed feed function in the CNC program.
In this paper, these approaches are applied to medium size workpieces with the same features of the actual punch and die for AHSS forming. Results are provided to die manufacturers for application in real forming tools. This technological model of the milling process estimates values of cutting forces and offers manufacturers a reduction of production and lead times.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Integrated Manufacturing Initiative Inc. (2000) Integrated manufacturing technology roadmapping project. Integrated Manufacturing Initiative, Oak Ridge, TN
Institute for Prospective Technological Studies (2003) FUTMAN: Future of manufacturing in Europe 2015 – 2020 – the challenge for sustainable development, European Union report. European Commission, Joint Research Centre, Institute for Prospective Technological Studies, Seville
International Iron and Steel Institute (2004) AHSS guidelines. http://www.worldautosteel.org/
López de Lacalle LN, Lamikiz A, Sánchez JA , Arana, JL (2002) Improving the surface finish in the high-speed milling of stamping dies. J Mater Process Technol 123(2):292–302
Fallböhmer P, Rodríguez CA, Ozel T, Altan T (2000) High-speed machining of cast iron and alloy steels for die and mold manufacturing. J Mater Process Technol 121:104–115
Fallböhmer P (1998) Advanced cutting tools for the finishing of dies and molds. Springer-Verlag, Berlin Heidelberg New York
Lee SW, Yang DY (1998) An assessment of numerical parameters influencing springback in explicit finite element analysis of sheet metal forming process. J Mater Process Technol 80–81:60–67
Holmberg S, Enquist B, Thilderkvist P (2004) Evaluation of sheet metal formability by tensile tests. J Mater Process Technol 145(1):72–83
López de Lacalle LN, Lamikiz A, Sánchez JA, Salgado MA (2004) Cutting force integration at the CAM stage in the high-speed milling of complex surfaces. Int J Comput Integr Manuf (to be published)
Kang MC, Kim KK, Lee DW, Kim JS, Kim NK (2001) Characterization of inclined planes according to the variations of cutting direction in high-speed ball-end milling, Int J Adv Manuf Technol 17:323–329
López de Lacalle LN, Lamikiz A, Salgado MA, Herranz S, Rivero A (2002) Process planning for reliable high-speed machining of moulds. Int J Prod Res 40(12):2789–2809
Al-Fawzan MA, Al-Ahmari AMA (2004) Simultaneous determination of the optimal process mean and cutting speed for a manufacturing process. Prod Plann Contr 15(3):336–341
Schulz H (2000) Hocheschwindigkeits bearbeitung /High-speed machining. Springer-Verlag, Berlin Heidelberg New York
Test part NCG 2004/T1 (2004) Test part HSC, NC Gesellschaft
Weinert K, Enselman A, Friedhoff J (1997), Milling simulation for process optimization in the field of die and mould manufacturing. Ann CIRP 46(1):30–34
Arnone M (1998) High performance machining. Hanser Gardner Publications, Ohio, USA
Duc E, Lartigue C, Thiebaut F (1998) A test part for the machining of freeform surfaces. In: Proceedings of the Improving Machine Tool Performance Seminar, San Sebastián, Spain, vol 1, pp 423–435
Aoyama T, Inasaki I (2001) Performances of HSK tool interfaces under high rotational speeds. Ann CIRP 50(1):281–284
Koshy P, Dewes RC, Aspinwall DK (2002) High-speed end milling of hardened AISI D2 tool steel. J Mater Process Technol 127:266–273
López de Lacalle LN, Lamikiz A, Sánchez JA, Salgado MA (2004) Effects of tool deflection in the high-speed milling of inclined surfaces. Int J Adv Manuf Technol 24:621–631
Kim GM, Kim BH, Chu CN (2003) Estimation of cutter deflection and form error in ball-end milling process. Int J Mach Tool Manuf 43:917–924
Choi K, Jerard RB (1998) Sculptured surface machining: theory and applications. Kluwer, Boston
Lee P, Altintas Y (1996) Prediction of ball-end milling forces from orthogonal cutting data. Int J Mach Tool Manuf 36(9):1059–1072
Bouzakis KD, Aichouh P, Efstathiou KD (2003) Determination of the chip geometry, cutting force and roughness in freeform surfaces finishing milling, with ball end tools. Int J Mach Tool Manuf 43:499–514
Lamikiz A, López de Lacalle LN, Salgado MA, Sánchez JA (2004) Cutting force estimation in sculptured surface machining. Int J Mach Tool Manuf 44(14):1511–1522
Kang MC, Kim KK, Lee DW, Kim JS, Kim NK (2001) Characterization of inclined planes according to the variations of cutting direction in high-speed ball-end milling. Int J Adv Manuf Technol 17:323–329
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
López de Lacalle, L., Lamikiz, A., Muñoa, J. et al. Improving the high-speed finishing of forming tools for advanced high-strength steels (AHSS). Int J Adv Manuf Technol 29, 49–63 (2006). https://doi.org/10.1007/s00170-004-2482-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-004-2482-z