Abstract
A frequent goal of the design of vibrating structures is to avoid resonance of the structure in a given interval for external excitation frequencies. This can be achieved by, e.g., maximizing the fundamental eigenfrequency, an eigenfrequency of higher order, or the gap between two consecutive eigenfrequencies of given order. This problem is often complicated by the fact that the eigenfrequencies in question may be multiple, and this is particularly the case in topology optimization. In the present paper, different approaches are considered and discussed for topology optimization involving simple and multiple eigenfrequencies of linearly elastic structures without damping. The mathematical formulations of these topology optimization problems and several illustrative results are presented.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Bendsøe MP (1989) Optimal shape design as a material distribution problem. Struct Optim 1:193–202
Bendsøe MP (2006) Computational challenges for multi-physics topology optimization. In: Mota Soares CA, Martins JAC, Rodrigues HC, Ambrosio JAC (eds) Computational mechanics—solids, structures and coupled problems. Springer, Dordrecht, The Netherlands, pp 1–20
Bendsøe MP, Kikuchi N (1988) Generating optimal topologies in structural design using a homogenization method. Comput Methods Appl Mech Eng 71(2):197–224
Bendsøe MP, Olhoff N (1985) A method of design against vibration resonance of beams and shafts. Optim Control Appl Methods 6:191–200
Bendsøe MP, Sigmund O (1999) Material interpolation schemes in topology optimization. Arch Appl Mech 69:635–654
Bendsøe MP, Sigmund O (2003) Topology optimization: theory, methods and applications. Springer, Berlin
Bendsøe MP, Olhoff N, Taylor JE (1983) A variational formulation for multicriteria structural optimization. J Struct Mech 11:523–544
Bendsøe MP, Olhoff N, Sigmund O (eds) (2006) Topological design optimization of structures, machines and materials—status and perspectives. Proc. IUTAM Symp., Copenhagen, Denmark, October 26–29, 2005. Springer, Dordrecht, The Netherlands
Bratus AS, Seyranian AP (1983a) Bimodal solutions in eigenvalue optimization problems. Prikl Mat Meh 47:546–554
Bratus AS, Seyranian AP (1983b) Bimodal solutions in eigenvalue optimization problems. Appl Math Mech 47:451–457
Cheng G, Olhoff N (1982) Regularized formulation for optimal design of axisymmetric plates. Int J Solids Struct 18:153–169
Diaz AR, Kikuchi N (1992) Solutions to shape and topology eigenvalue optimization problems using a homogenization method. Int J Numer Methods Eng 35:1487–1502
Diaz AR, Lipton R, Soto CA (1994) A new formulation of the problem of optimum reinforcement of Reissner–Midlin plates. Comp Meth Appl Mechs Eng 123:121–139
Du J, Olhoff N (2007) Minimization of sound radiation from vibrating bi-material structures using topology optimization. Struct Multidiscipl Optim 33:305–321
Eschenauer H, Olhoff N (2001) Topology optimization of continuum structures: a review. Appl Mech Rev 54(4):331–389
Haftka RT, Gurdal Z, Kamat MP (1990) Elements of structural optimization. Kluwer, Dordrecht
Haug EJ, Choi KK, Komkov V (1986) Design sensitivity analysis of structural systems. Academic, New York
Jensen JS, Pedersen NL (2006) On maximal eigenfrequency separation in two-material structures: the 1D and 2D scalar cases. J Sound Vib 289:967–986
Kosaka I, Swan CC (1999) A symmetry reduction method for continuum structural topology optimization. Comput Struct 70:47–61
Krog LA, Olhoff N (1999) Optimum topology and reinforcement design of disk and plate structures with multiple stiffness and eigenfrequency objectives. Comput Struct 72:535–563
Lancaster P (1964) On eigenvalues of matrices dependent on a parameter. Numer Math 6:377–387
Ma ZD, Cheng HC, Kikuchi N (1994) Structural design for obtaining desired eigenfrequencies by using the topology and shape optimization method. Comput Syst Eng 5(1):77–89
Ma ZD, Kikuchi N, Cheng HC (1995) Topological design for vibrating structures. Comput Methods Appl Mech Eng 121:259–280
Masur EF (1984) Optimal structural design under multiple eigenvalue constraints. Int J Solids Struct 20:211–231
Masur EF (1985) Some additional comments on optimal structural design under multiple eigenvalue constraints. Int J Solids Struct 21:117–120
Olhoff N (1976) Optimization of vibrating beams with respect to higher order natural frequencies. J Struct Mech 4:87–122
Olhoff N (1977) Maximizing higher order eigenfrequencies of beams with constraints on the design geometry. J Struct Mech 5:107–134
Olhoff N (1989) Multicriterion structural optimization via bound formulation and mathematical programming. Struct Optim 1:11–17
Olhoff N, Du J (2007) Topological design for minimum dynamic compliance of continuum structures subjected to forced vibration. Struct Multidisc Optim (in press)
Olhoff N, Parbery R (1984) Designing vibrating beams and rotating shafts for maximum difference between adjacent natural frequencies. Int J Solids Struct 20:63–75
Overton ML (1988) On minimizing the maximum eigenvalue of a symmetric matrix. SIAM J Matrix Anal Appl 9(2):256–268
Pedersen NL (2000) Maximization of eigenvalues using topology optimization. Struct Multidisc Optim 20:2–11
Rozvany G, Zhou M (1991) Applications of the COC method in layout optimization. In: Eschenauer H, Mattheck C, Olhoff N (eds) Proc. Int. Conf. on Engineering Optimization in Design Processes (held in Karlsruhe 1990). Springer, Berlin Heidelberg New York, pp 59–70
Rozvany G, Zhou M, Birker T (1992) Generalized shape optimization without homogenization. Struct Optim 4:250–252
Seyranian AP (1987a) Multiple eigenvalues in optimization problems. Prikl Mat Meh 51:349–352
Seyranian AP (1987b) Multiple eigenvalues in optimization problems. Appl Math Mech 51:272–275
Seyranian AP, Lund E, Olhoff N (1994) Multiple eigenvalues in structural optimization problems. Struct Optim 8(4):207–227
Sigmund O (1997) On the design of compliant mechanisms using topology optimization. Mech Struct Mach 25:493–524
Sigmund O (2001) Microstructural design of elastic band gap structures. In: Cheng GD et al (eds), Proceedings of the 4th World Congress of Structrual and Multidisciplinary Optimization WCSMO4. Liaoning Electronic, Dalian, China, pp 6
Sigmund O, Jensen JS (2003) Systematic design of phononic band-gap materials and structures by topology optimization. Philos Trans R Soc Lond Ser A Math Phys Sci 361:1001–1019
Sigmund O, Petersson J (1998) Numerical instabilities in topology optimization: a survey of procedures dealing with checkerboards, mesh-dependencies and local minima. Struct Optim 16:68–75
Svanberg K (1987) The method of moving asymptotes − a new method for structural optimization. Int J Numer Methods Eng 24:359–373
Taylor JE, Bendsøe MP (1984) An interpretation of min–max structural design problems including a method for relaxing constraints. Int J Solids Struct 20:301–314
Tcherniak D (2002) Topology optimization of resonating structures using SIMP method. Int J Numer Methods Eng 54:1605–1622
Wittrick WH (1962) Rates of change of eigenvalues, with reference to buckling and vibration problems. J R Aeronaut Soc 66:590–591
Author information
Authors and Affiliations
Corresponding author
Additional information
An erratum to this article can be found at http://dx.doi.org/10.1007/s00158-007-0167-6
Rights and permissions
About this article
Cite this article
Du, J., Olhoff, N. Topological design of freely vibrating continuum structures for maximum values of simple and multiple eigenfrequencies and frequency gaps. Struct Multidisc Optim 34, 91–110 (2007). https://doi.org/10.1007/s00158-007-0101-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00158-007-0101-y