Abstract
In recent years, there has been considerable progress in the optimization of cast parts with respect to strength, stiffness, and frequency. Here, topology optimization has been the most important tool in finding the optimal features of a cast part, such as optimal cross-section or number and arrangement of ribs. An optimization process with integrated topology optimization has been used very successfully at Adam Opel AG in recent years, and many components have been optimized. This two-paper review gives an overview of the application and experience in this area. This is the first part of a two-paper review of optimization of cast parts.Here, we want to focus on the application of the original topology optimization codes, which do not take manufacturing constraints for cast parts into account. Additionally, the role of shape optimization as a fine-tuning tool will be briefly analyzed and discussed.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Altair Engineering, Inc (1999) OptiStruct user's manual, version 3.5. Troy, MI
Altair Engineering, Inc (2002) OptiStruct user's manual, version 5.1. Troy, MI
Baumgartner A, Harzheim L, Mattheck C (1990) SKO (Soft Kill Option): the biological way to find an optimum structure topology. Int J Fatigue 14:387–393
Bendsoe MP (1989) Optimal shape design as a material distribution problem. Struct Optim 1:193–202
Bendsoe MP (1995) Optimization of structural topology, shape, and material. Springer, Berlin Heidelberg New York
Bendsoe MP, Kikuchi N (1988) Generating optimal topologies in structural design using a homogenization method. Comput Methods Appl Mech Eng 71:197–224
Fuchs MB, Paley M, Miroshny E (1999) The Aboudi micromechanical model for topology design of structures. Comput Struct 73:355–362
Harzheim L, Graf G (1995) Optimization of engineering components with the SKO method. Proceedings of the ninth international conference on vehicle structural mechanics and CAE, April 4–6, 1995, Troy, MI, pp 235–243
Harzheim L, Graf G (1996) Shape and topology optimization in automotive industry. Proceedings of the 3rd international conference on high performance computing in automotive industry, October 7–10, 1996, Paris, pp 167–182
Harzheim L, Graf G (1997) Shape200: a program to create basis vectors for shape optimization using solution 200 of MSC/NASTRAN. Proceedings of the X international conference on vehicle structural mechanics and CAE, April 8–10, 1997, Troy, MI, pp 219–228
Harzheim L, Graf G (2002) TopShape: an attempt to create design proposals including manufacturing constraints. Int J Veh Des 28:389–409
Harzheim L, Graf G, Klug S, Liebers J (1999) Topology optimisation in practice. ATZ Worldw 7–8:11–18
Hassani B, Hinton E (1998) A review on homogenization and topology optimization: I. Homogenization theory for media with periodic structure. II. Analytical and numerical solution of homogenization equations. III. Topology optimization using optimality criteria. Comput Struct 69:707–756
Hinton E, Sienz J (1993) Integrated topology optimization. In: Smith I (ed) Proc. of 2nd ACME Conf., Manchester
Ma Z-D, Kikuchi N, Cheng H-C, Hagiwara I (1992) Topology and shape optimization technique for structural dynamic problems. Recent Adv Struct Mech—ASME PVP-Vol. 248/NE-Vol. 10:133–143
MacNeal Schwendler Corporation (1994) MSC/NASTRAN design sensitivity and optimization, version 68
Mattheck C (1990) Design and growth rule for biological structures and their application in engineering. Fatigue Fract Eng Mater Struct 13:535–550
Mlejnek HP, Schirrmacher R (1993) An engineer's approach to optimal material distribution and shape finding. Comput Methods Appl Mech Eng 106:1–26
Olhoff N, Ronhold E, Scheel J (1998) Topology optimization of plate like structures using 3-D elasticity and optimum 3-D microstructures. Proc. 7th AIAA/USA/NASA/ISSMO symposium on multidisciplinary analysis and optimization, St. Louis, MO, pp 1853–1863
Pederson P (1998) Influence from non-linearities on optimal shape design. 7th AIAA/USAF/NASA/ISSMO symposium on multidisciplinary analysis and optimization, Part 2, 1998, pp 1123–1130
Pederson P (2000) On optimal shapes in material and structures. Struct Multidiscipl Optim 19:169–182
Rozvany GIN, Bendsoe M, Kirsch U (1995) Layout optimization of structures. Appl Mech Rev 48:41–119
Xsi YM, Steven GP (1993) A simple evolutionary procedure for structural optimization. Comput Struct 49:885–896
Yang RJ (1997) Multidiscipline topology optimization. Comput Struct 63:1205–1212
Young V, Querin OM, Steven GP, Xie YM (1999) 3D and multiple load case Bi-directional Evolutionary Structural Optimization (BESO). Struct Optim 18:183–192
Zhou M, Rozvany GIN (1991) The COC algorithm: Part II: topological, geometrical and generalized shape optimization. Comput Methods Appl Mech Eng 89:197–224
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Harzheim, L., Graf, G. A review of optimization of cast parts using topology optimization. Struct Multidisc Optim 30, 491–497 (2005). https://doi.org/10.1007/s00158-005-0553-x
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00158-005-0553-x