Abstract
The minimum volume design problem of elastic perfectly plastic finite element structures subjected to a combination of fixed and perfect cyclic loads is studied. The design problem is formulated in such a way that incremental collapse is certainly prevented. The search for the structural design with the required limit behaviour is effected following two different formulations, both developed on the grounds of a statical approach: the first one operates below the elastic shakedown limit and is able to provide a suboptimal design; the second one operates above the elastic shakedown limit and is able to provide the/an optimal design. The Kuhn–Tucker conditions of the two problems provide useful information about the different behaviour of the obtained structures.
An application concludes the paper; the comparison among the designs is effected, pointing out the different behaviour of the obtained structures as well as the required computational effort related to the numerical solutions.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Banichuk, N.V. 1990: Introduction to optimization of structures. Berlin Heidelberg New York: Springer
Brousse, P. 1988: Optimization in mechanics: problems and methods. The Nederlands, Amsterdam: Elsevier Science
Caffarelli, A.; Giambanco, F.; Palizzolo, L. 2001: Progetto ottimale a collasso incrementale impedito di strutture elastoplastiche. X Convegno Nazionale ANIDIS, L’Ingegneria Sismica in Italia, Potenza, Italy
Cinquini, C.; Guerlement, G.; Lamblin, D. 1980: Finite element iterative methods for optimal elastic design of circular plates. Comput Struct12(1), 85–92
Cohn, M.Z.; Parimi, S.R. 1973: Optimal design of plastic structures for fixed and shakedown loadings. J Appl Mech, 595–599
Corradi, L.; Zavelani Rossi, A. 1974: A linear programming approach to shakedown analysis of structures. Comput Methods Appl Mech Eng3, 37–53
Cottle, R.W.; Spang, J.S.; Stone, R.E. 1992: The linear complementarity problem. Academic Press
Gallagher, R.H.; Zienkiewicz, O.C. 1973: Optimum structural design. London: Wiley
Giambanco, F.; Palizzolo, L.; Polizzotto, C. 1994a: Optimal shakedown design of beam structures. Struct Optim8, 156–167
Giambanco, F.; Palizzolo, L.; Polizzotto, C. 1994b: Optimal shakedown design of circular plates. J Eng Mech120(12), 2535–2555
Giambanco, F.; Palizzolo, L. 1994c: Bounds on plastic deformations of trusses. Int J Solids Struct31(6), 785–795
Giambanco, F.; Palizzolo, L. 1995: Optimality conditions for shakedown design of trusses. Comput Mech16(6), 369–378
Giambanco, F.; Palizzolo, L. 1996: Computation of bounds on chosen measures of real plastic deformation for beams. Comput Struct61(1), 171–182
Giambanco, F.; Palizzolo, L.; Cirone, L. 1998: Computational methods for optimal shakedown design of FE structures. Struct Optim15(3/4), 284–295
Giambanco, F. 2000: Non-ratchet design of FE structures. Proceedings of ECCOMAS 2000, European Congress on Computational Methods in Applied Sciences and Engineering, Barcelona
Haftka, R.T.; Gürdal, Z.; Kamat, M.P. 1990: Elements of structural optimization. The Nederlands, Dordrecht: Kluwer Academic
König, J.A. 1975: On optimum shakedown design. In: Sawczuk, A.; Mroz, Z. (ed.) Optimization in structure design, pp. 405–414, Berlin Heidelberg New York: Springer
Maier, G. 1968: A quadratic programming approach for certain classes of nonlinear structural problems. Meccanica3, 121–130
Maier, G.; Zavelani Rossi, A.; Benedetti, D. 1972: A finite element approach to optimal design of plastic structures in plane stress. Int J Numer Methods Eng4, 455–473
Majid, K.I. 1974: Optimum design of structures. London: Newnes-Butterworths
Polizzotto, C.; Borino, G.; Fuschi, P. 1990: On the steady-state response of elastic perfectly plastic solids to cyclic loads. In: Kleiber, M.; König, J.A. (ed.) Inelastic Solids Struct, pp. 473–488 , Swansea (U.K.): Pineridge Press
Polizzotto, C. 1994a: On elastic plastic structures under cyclic loads. Eur J Mech A/Solids13(4), 149–173
Polizzotto, C. 1994b: Steady states and sensitivity analysis in elastic-plastic structures subjected to cyclic loads. Int J Solids Struct31, 953–970
Polizzotto, C.; Borino, G.; Fuschi, P. 2001: Assessment of the elastic/plastic shakedown load boundary for structures subjected to cyclic loading. XV Congresso Nazionale AIMETA, Taormina, Italy
Ponter, A.R.S.; Haofeng, C. 2001: A minimum theorem for cyclic load in excess of shakedown, with application to the evaluation of a ratchet limit. Eur J Mech A/Solids20, 539–553
Rao, S.S. 1978: Optimization: theory and applications. New Delhi: Prabhat
Rozvany, G.I.N. 1976: Optimal design of flexural systems. Oxford: Pergamon
Roznavy, G.I.N. 1989: Structural design via optimality criteria. The Nederlands, Dordrecht: Kluwer Academic
Save, M.A.; Prager, W. 1985: Structural optimization. New York: Plenum
Zarka, J.; Casier, J. 1979: Elastic-plastic response of structure to cyclic loading: practical rules. In Nemat Nasser, S. (ed.) Mech Today, pp. 93–198, Oxford: Pergamon Press
Zarka, J.; Frelat, J.; Inglebert, G.; Kasnat-Navidi, P. 1990: A new approach in inelastic analysis of structures. Ecole Polytechnique Palaisau, France
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Giambanco, F., Palizzolo, L. & Caffarelli, A. Computational procedures for plastic shakedown design of structures. Struct Multidisc Optim 28, 317–329 (2004). https://doi.org/10.1007/s00158-004-0402-3
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00158-004-0402-3