Abstract
Two types of solutions may be considered in generalized shape optimization. Absolute minimum weight solutions, which are rather unpractical, consist of solid, empty and porous regions. In more practical solutions of shape optimization, porous regions are suppressed and only solid and empty regions remain. This note discusses this second class of problems and shows that a solid, isotropic microstructure with an adjustable penalty for intermediate densities is efficient in generating optimal topologies.
Article PDF
Avoid common mistakes on your manuscript.
References
Bendsøe, M.P. 1989: Optimal shape design as a material distribution problem.Struct. Optim. 1, 193–202
Bendsøe, M.P.; Kikuchi, N. 1988: Generating optimal topologies in structural design using a homogenization method.Comp. Meth. Appl. Mech. Eng. 71, 197–224
Díaz, A.R.; Bendsøe, M.P. 1992: Shape optimization of multipurpose structures by a homogenization method.Struct. Optim. 4, 17–22
Hemp, W.S. 1973:Optimum structures. Oxford: Clarendon
Kohn, R.V.; Allaire, G. 1992: Structural optimization using homogenization.Proc. NATO ARW “Topology design of structures” (held in Sesimbra, Portugal). Dordrecht: Kluwer
Kohn, R.V.; Strang, G. 1983: Optimal design for torsional rigidty. In: Atluri, S.N.; Gallagher, R.H.; Zienkiewicz, O.C. (eds.)Hybrid and mixed finite element methods, pp. 281–288. Chichester: Wiley & Sons
Kohn, R.V.; Strang, G. 1986: Optimal design and relaxation of variational problems, I, II, and III.Comm. Pure Appl. Math. 39, 113–137, 139–182, 353–377
Lurie, K.A.; Cherkaev, A.V. 1984; G-closure for some particular set of admissible material characteristics for the problem of bending of thin elastic plates.JOTA,42, 305–316
Michell, A.G.M. 1904: The limits of economy of material in framestructures.Phil. Mag. 8, 589–597
Murat, F.; Tartar, L. 1985: Calcul des variations et homogénéisation. In:Les méthodes de l'homogénéisation: Théorie et applications en physique, pp. 319–370. Eyrolles, Paris: Coll. de la Dir. des Etudes et Recherches de Elec. de France
Olhoff, N.; Bendsøe, M.P.; Rasmussen, J. 1991: On CAD-integrated structural topology and design optimization.Comp. Meth. Appl. Mech. Eng. 89, 259–279
Ong, T.G.; Rozvany, G.I.N.; Szeto, W.T. 1988: Least-weight design of perforated elastic plates for given compliance: non-zero Poisson's ratio.Comp. Meth. Appl. Mech. Eng. 66, 301–322
Prager, W.; Rozvany, G.I.N. 1977: Optimal layout of grillages.J. Struct. Mech. 5, 1–18
Rozvany, G.I.N.; 1992: Optimal layout theory: analytical solutions for elastic structures with several deflection constraints and load conditions.Struct. Optim. 4, 247–249
Rozvany, G.I.N.; Olhoff, N.; Bendsøe, M.P.; Ong, T.G.; Sandler, R.; Szeto, W.T. 1987: Least-weight design of perforated elastic plates I, II.Int. J. Solids Struct. 23, 521–536, 537–550
Rozvany, G.I.N.; Zhou, M. 1991: The COC algorithm, Part I: cross-section optimization or sizing.Comp. Meth. Appl. Mech. Eng. 89, 281–308
Sankaranarayanan, S.; Haftka, R.T.; Kapania, R.K. 1992: Truss topology optimization with simultaneous analysis and design.Proc. 33rd AIAA/ASME/ASCE/AHS/ASC Struct. Dyn. Mat. Conf. (held in Dallas), pp. 2576–2585. Washington DC: AIAA
Suzuki, K.; Kikuchi, N. 1991: A homogenization method for shape and topology optimization.Comp. Meth. Appl. Mech. Eng. 93, 291–318
Vigdergauz, S. 1992: Two-dimensional grained composites of extreme rigidity.18th Int. Congr. Theor. Appl. Mech. (held in Haifa)
Zhou, M.; Rozvany, G.I.N. 1991: The COC algorithm, Part II: topological, geometrical and generalized shape optimization.Comp. Meth. Appl. Eng. 89, 309–336
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Rozvany, G.I.N., Zhou, M. & Birker, T. Generalized shape optimization without homogenization. Structural Optimization 4, 250–252 (1992). https://doi.org/10.1007/BF01742754
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01742754