Abstract
Brittle fracture of Tennessee Marble, Charcoal Granite and sandstone was studied using the Hopkinson split bar method. The study of the actual fracture behaviour of the rock was possible as no transducers were attached to the specimens themselves. The degree of brittleness of rock was determined by using the attenuation of the first wavefront in a fracturing specimen. There existed a maximum limit to the stress amplitude which could be transmitted through a rock specimen. Fracture is initiated in rock at the same stress under both static and dynamic loads.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
B. Hopkinson, A Method of Measuring the Pressure Produced in the Detonation of High Explosives or by the Imapct of Bullets, Phil. Trans. Roy. Soc., A 213 (1914) pp. 375–457.
R. M. Davies, A Critical Study of the Hopkinson Pressure Bar, Phil. Trans. Roy. Soc., A 240 (1948) pp. 375–457.
H. Kolsky, Stress Waves in Solids, Dover, New York, 1963.
[4] K. O. Hakalehto, The Behaviour of Rock under Impulse Loads. A Study Using the Hopkinson Split Bar Method, Acta Polytechnica Scandinavica, Ch. 81, 1969.
W. Goldsmith, Pulse Propagation in Rocks, in Failure and Breakage of Rock, ed. Fairhurst, pp. 528–537, AIME, New York, 1967.
Z. T. Bieniawski, Mechanism of Brittle Fracture of Rock, Int. J. Rock Mech. Min. Sci., 4 (1967) pp. 395–430.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Hakalehto, K.O. Brittle fracture of rocks under impulse loads. Int J Fract 6, 249–256 (1970). https://doi.org/10.1007/BF00212655
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF00212655